Windshield wiper system Nissan Murano The third generation (Z51 body) plays a critical role in ensuring safety when driving in rain or snow. The manufacturer has provided a specific configuration that can confuse owners when trying to independently select components. An incorrectly selected brush size will cause it to hit the frame or leave unwashed areas on the windshield.
It is important for crossover owners to understand that the standard sizes indicated in the technical documentation may vary depending on the year of manufacture and the sales market. For Nissan Murano Z51 (production from 2014 to 2020) a frameless system is used, which dictates its own rules of choice. Ignoring the nuances of fastening can turn a simple replacement into a lengthy process of dismantling old elements.
Standard wiper dimensions for Z51 body
The main characteristic that you should focus on when purchasing is the length of the brushes in millimeters or inches. For model Murano For the Z51, the manufacturer installed an asymmetrical set-up where the driver and passenger sides are different lengths. This is done in order to ensure maximum coverage of the windshield area without mutual overlap of movement trajectories.
The most common configuration for all model years includes two brushes of different lengths. The driver's side is usually equipped with a longer element, and the passenger side - a shorter one. You should not try to set the same dimensions on both sides, as this will upset the balance of fit to the curved surface of the glass.
Let's look at the exact parameters that are considered the factory standard:
- 🚗 Driver's side: 26 inches (about 650 mm)
- 🚙 Passenger side: 16 inches (about 400 mm)
- 🌧️ Rear wiper: 12 inches (about 300 mm)
Some owners note that the length may vary slightly in certain trim levels or regions, but the above parameters are suitable for 95% of cars Nissan Murano Z51. When in doubt, it's best to measure your old brushes with a ruler before ordering new ones.
⚠️ Warning: Installing blades of the wrong length (for example, 24 inches instead of 26) on the driver's side will leave the top of the glass uncleaned, which is critical in heavy rainfall.
Mount types and adapter compatibility
The key point when choosing is not only the length, but also the type of fastening. Nissan uses a specific clamp, often called a "hook" or "hook", but with a unique latch shape. Original wipers or high-quality analogues always come with a set of adapters, but their presence does not guarantee a perfect fit without proper adjustment.
Most modern windshield wiper manufacturers, such as Bosch, Denso or Valeo, produce universal lines that are compatible with Nissan mounts. However, when buying cheap Chinese analogues, the risk of getting an unsuitable adapter increases many times over. You need to carefully inspect the locking mechanism before installation.
The main types of fastenings that you may encounter:
- 🔧 Standard hook (Hook) - the main type for Z51
- 🔩 Side Pin - rare, requires an adapter
- 🔗 Latch lock (Bayonet) - requires exact alignment of grooves
If you purchased brushes without adapters for your vehicle, do not try to use force to attach them. This will cause the plastic clips on the wiper arm to break. In such cases, it is better to purchase a separate set of adapters or return the product to the seller.
- Bosch
- Denso
- Valeo
- Exclusively original Nissan
- Chinese analogues
Comparison table of popular brands and models
The auto parts market offers many options for replacing original brushes. To choose the best option, it is worth considering the characteristics of popular brands offering body solutions Murano Z51. The difference between them lies not only in price, but also in the quality of rubber, the presence of a frame and aerodynamic properties.
Below is a table with the most popular models that are perfect for your crossover. Pay attention to the mounting type and approximate price to make an informed choice.
| Brand/Model | Brush type | Size (Water/Pass) | Features |
|---|---|---|---|
| Nissan Genuine (OEM) | Frameless | 26" / 16" | Ideal mount, high price |
| Bosch Aerotwin A26H | Frameless | 26" / 16" | Excellent aerodynamics, durability |
| Denso DU-26S | Frameless | 26" / 16" | Soft rubber, quiet operation |
| Valeo Silencio X.TM | Frameless | 26" / 16" | Reinforced frame, suitable for winter |
Usage original parts guarantees that you get exactly what was installed at the factory, but often this is not the most economical option. Alternative brands often offer better value for money, especially if their tires are adapted to Russian climatic conditions.
⚠️ Warning: Cheap brushes with a rigid frame can quickly scratch the windshield Nissan Murano if there is fine dust or sand on it.
Instructions for replacing wipers yourself
The process of replacing windshield wipers Nissan Murano Z51 It is quite simple and does not require special tools. However, given the fragility of the plastic and levers, you need to act carefully. The main rule is not to release the metal lever without the brush, as it can hit the glass hard and break it.
First, lift the windshield wiper arm up until it locks into a vertical position. Then rotate the brush itself perpendicular to the lever to release the lock. Press the button or fastening tab and slide the brush down towards the glass, releasing it from the hook of the lever.
☑️ Preparing to replace wipers
Installing a new brush occurs in the reverse order. Place the adapter (if required) on the new element, move it to the hook of the lever and press until it clicks. Make sure the latch is fully seated. Lower the lever onto the glass only after you are sure that it is securely fastened.
If you have difficulty getting it to fit, check to make sure the left and right brushes are not mixed up, as their shapes and adapters may be different. In some cases, gently rocking the brush helps, but without excessive force.
What to do if the brush does not lock?
If the brush does not want to slide onto the lever, check that the latch on the hook is fully open. Sometimes on old levers the plastic becomes deformed and the latch does not snap fully into place. Try to bend the clamp a little with a thin screwdriver, but be extremely careful not to break it.
How to extend the life of rubber blades
Even the most expensive brushes Bosch or Denso They will wear out quickly if you don't take care of them. The main cause of premature wear is dirt and abrasive particles that accumulate on the windshield. Regular washing of glass and rubber bands themselves will significantly extend their life.
In winter, special attention should be paid to removing ice and snow. Under no circumstances should the windshield wipers be turned on when the glass is covered with ice. This will instantly damage the rubber and may burn out the windshield wiper motor. Use antifreeze fluid and turn on the washer before activating the levers.
Recommendations for caring for the cleaning system:
- 🧽 Wipe your rubber bands regularly with a damp cloth to remove road dust
- ❄️ Do not use hot water on frozen glass to prevent the rubber from cracking
- 🌧️ Change your wipers at least once a year, even if they look intact
Using a quality anti-freeze fluid is also important. Cheap anti-freeze products often contain alcohol, which dries out the rubber, making it hard and less elastic. Choose glycerin-based products or special winter formulations for cars.
Before winter, treat rubber blades with a special silicone spray - this will improve glide and prevent freezing to the glass.
Features of the rear brush and its selection
Rear wiper on Nissan Murano Z51 often goes unnoticed, although its role in providing visibility when reversing or in heavy rain is extremely important. The size of the rear brush is much smaller than the front and is about 300 mm (12 inches).
The mounting of the rear brush may differ from the front ones. Some models use a specific adapter with a nut or clip. When replacing, it is important to choose exactly the model that is intended for the rear door of the crossover, since the angle of inclination and shape of the glass are different there.
Common problems with the rear brush:
- 🔩 Unscrewing the fastening nut due to vibration
- 🌧️ Freezing of the drive mechanism in severe frosts
- 🚫 Ignoring replacement until completely worn out, which leads to scratches
If the rear brush begins to squeak or leave streaks, it should be replaced. Do not try to simply wash or lubricate it, as rubber loses its properties over time. For Murano Z51 there are both original parts and universal analogues with the necessary adapter.
The rear brush requires replacement as often as the front ones, as it accumulates more dirt and reagents from the road.
Criteria for choosing winter and summer brushes
In harsh climates, many car owners are faced with the need to change the type of wipers depending on the season. Summer blades can freeze to the glass, and their rubber becomes too hard in the cold. Winter models have a special frame or protective cover that prevents icing.
For Nissan Murano Z51 recommends hybrid or frameless brushes that work well in all conditions. Hybrid models have an aerodynamic fairing that presses the rubber against the glass at high speed, which is important for a crossover.
Important factors when choosing a season:
- 🌡️ Operating temperature: winter brushes operate down to -40°C
- 🏎️ Speed mode: hybrid models hold down pressure better
- 💰 Budget: winter sets are more expensive, but last longer in the cold season
If you live in a region with a mild climate, you can get by with high-quality all-season models. However, for central Russia and the northern regions, changing brushes to winter ones is a necessity, not a whim.
Is it possible to install winter brushes in summer?
Technically possible, but they can make noise and are less effective at cleaning dry glass due to the extra weight of the frame. In summer it is better to use lightweight frameless models.
FAQ: Frequently asked questions about Murano Z51 wipers
Are Nissan X-Trail wipers suitable for Murano Z51?
In most cases, the brush sizes are the same (26" and 16"), but the type of attachment may vary. It is better to use original adapters or universal brushes, checking compatibility using the VIN code.
How do you know when it's time to change your wipers?
The basis for replacement is the appearance of streaks, streaks, omissions during cleaning, or a characteristic squeak. If the rubber is cracked or has lost its elasticity, replacement is required, even if the brushes look intact.
Can longer wipers be used?
Installing longer brushes (for example, 28" instead of 26") is not recommended, as they may touch the stand or each other during operation, which will lead to damage to the mechanism.
Where is the best place to buy spare parts for Nissan Murano?
It is best to buy from specialized auto parts stores or official dealers. Avoid purchasing from dubious markets where there is a high risk of running into a low-quality fake.
What to do if the wiper bounces off at speed?
Stop immediately in a safe place. Check the integrity of the lever and fastening. If the retainer is broken, the entire wiper assembly will need to be replaced, not just the blades.