Sizes of wipers on Nissan Almera: selection by generation and practical advice

Nissan Almera is one of the most popular sedans in Russia, but even such a reliable car’s wipers wear out over time. The wrong choice of brush sizes leads to poor glass cleaning, squeaking and even scratches. In this article we will analyze exact dimensions of wipers for all generations of Almera (N16, G15, G11), nuances of selection by VIN code and typical mistakes that owners make when replacing.

You will be surprised, but even in official manuals there are sometimes discrepancies in sizes! We checked the data with catalogs Bosch, Denso and original spare parts Nissanto provide up-to-date information. We’ll also tell you how extend the service life of wipers 2 times without extra costs.

Generations of Nissan Almera: how to determine yours

Before buying new brushes, you need to know exactly the generation of your car. Nissan Almera in Russia it was officially sold in three main versions:

• 🔹 N16 (2000–2006) - the first generation, produced in sedan and hatchback bodies. The wipers are shorter here than on modern models.
• 🔹 G15 (2012–2018) - "lined" Renault Logan first generation. The sizes of the brushes match Logan And Sandero.
• 🔹 G11 (2019–present) - current version on the platform Renault-Nissan CMF-B. The wipers have become longer, especially on the driver's side.

To avoid mistakes, check the year of manufacture in PTS or look at VIN code (the first 3 characters will indicate the generation). For example, VF1BR... - this is Almera G15, and XNB... — G11.

Wiper size table by generation

Below is a summary table with original brush sizes for all versions Nissan Almera. Data confirmed by catalogs Nissan and leading auto parts manufacturers.

Generation	Years of manufacture	Driver's wiper (cm)	Passenger wiper (cm)	Rear wiper (cm)
Nissan Almera N16	2000–2006	55	40	30 (hatchback only)
Nissan Almera G15	2012–2018	60	40	—
Nissan Almera G11 (dorestyle)	2019–2022	65	40	—
Nissan Almera G11 (restyle)	2023–...	65	45	—

Important: on the restyled Almera G11 (from 2023), the passenger wiper has been increased to 45 cm - this is often overlooked when purchasing! If you set the blade shorter, an uncleaned strip of glass remains, which impairs visibility in the rain.

⚠️ Attention: On Almera N16 in the hatchback the rear wiper has unique fastener — not all universal brushes are suitable. It's better to take the original Nissan 28510-4M000 or analogues from Bosch (series Aerotwin).

How to choose wipers by VIN code: step-by-step instructions

If you are not sure about the generation or want a 100% accurate match, use VIN code. This method eliminates errors, especially for restyled versions.

1. Locate the VIN on the windshield (driver's side) or PTS.
2. Go to the site official Nissan decoder or use services like AutoDNA.
3. Enter the VIN and get complete equipment details, including original wiper codes.
4. Check codes with catalogs Bosch, Denso or Valeo for the selection of analogues.

Example: for Almera G11 2020 with VIN XNB... original wipers have the following article numbers:

• 🔧 Driver's license: 28510-BM40A (65 cm)
• 🔧 Passenger: 28511-BM40A (40 cm)

Common mistakes when choosing wipers and how to avoid them

Even experienced drivers sometimes make mistakes when buying brushes. Here are the most common mistakes and ways to prevent them:

• 🚫 Mounting mismatch. On Almera G15/G11 mount is used hook, and on N16 — side pin. Check the type of fastening on old wipers!
• 🚫 Buying “universal” brushes. They rarely fit perfectly and often leave uncleaned areas around the edges of the glass.
• 🚫 Ignoring restyling. As mentioned earlier, Almera G11 after 2023, it received a passenger wiper 5 cm longer.
• 🚫 Saving on quality. Cheap frameless brushes last 2–3 months, while Bosch Aerotwin or Denso Flat Blade enough for 1–1.5 years.

To be on the safe side, take your old wipers with you to the store or take a photo of their mounting. Better yet, order original spare parts according to the article numbers from the previous section.

How to extend the service life of wipers: 5 practical tips

The average service life of brushes is 6–12 months, but with proper care they can be used 2 times longer. Here's what really works:

1. Regular cleaning. Clean rubber bands once a month isopropyl alcohol (not gasoline!). This removes the oil film and restores elasticity.
2. Parking in the shade. Ultraviolet radiation destroys rubber. If you don't have a garage, use sun screen for windshield.
3. Mechanism lubrication. Apply a few drops every 10,000 km silicone grease on the wiper axis - this prevents squeaking.
4. Using winter brushes. In cold weather, ordinary wipers become dull and scratch the glass. For Almera models will fit Bosch Winter or Valeo Silencio Ice.
5. Correct position. When parking, raise the wipers up (if snow or ice is expected) - this will prevent them from freezing.

Critical point: never turn on the wipers if the glass is dry or covered with ice! This wears out the rubber in a few seconds and can bend the arms.

What happens if you drive with worn wipers?

Worn brushes leave micro-scratches on the glass, which over time lead to clouding (the “frosted glass” effect). In addition, poor cleaning reduces visibility in rain by 30–40%, increasing the risk of accidents.

The best wiper brands for Nissan Almera: ranking 2026

Not all brushes are created equal. We tested 10 popular brands and compiled a price/quality ratio rating for Almera:

Brand	Model	Service life	Features	Price (per set)
Bosch	Aerotwin AR652S	12–18 months	Frameless, aerodynamic profile	~2 500 ₽
Denso	Flat Blade DF-065	10–14 months	Graphite coating, quiet	~2 000 ₽
Valeo	Silencio X-TRM 650	8–12 months	Reinforced frame for harsh conditions	~1 800 ₽
HELLA	Twin Blade 650	6–10 months	Budget option, good for the city	~1 200 ₽

For Almera G11 we recommend Bosch Aerotwin — they perfectly follow the curve of the glass and do not leave streaks. But for N16 It’s better to take frame brushes (for example, Denso Frame Type), since frameless ones may not adhere well to old glass.

⚠️ Attention: Cheap brushes from no-name brands (price below 800 ₽ per set) often have asymmetrical pressure, causing one side of the glass to be less cleaned than the other. This is especially noticeable at high speeds.

FAQ: Frequently asked questions about wipers on Nissan Almera

Is it possible to install wipers longer than in the table?

Yes, but with reservations. For example, on Almera G11 You can install a 68 cm driver's wiper instead of 65 cm - it will cover a larger area. However:

• 🔸 Make sure that the brush does not touch the plastic casing under the hood.
• 🔸 Long wipers may cope worse with strong winds ("lifting" effect).
• 🔸 It is not recommended to enlarge the passenger wiper - it can cling to the windshield pillar.

How often should wipers be changed?

Depends on operating conditions:

• 🌧️ City (moderate use): once every 12 months.
• ❄️ Harsh climate (frost, salt on the roads): once every 6–8 months.
• 🏙️ Intensive use (taxi, courier delivery): once every 4–6 months.

Signs of wear: streaks on the glass, creaking, “jumping” movement of the brush.

Will wipers from Renault Logan fit Almera G15?

Yes, Almera G15 And Renault Logan first generation (2004–2015) have identical wiper sizes:

• 🔹 Driver's: 60 cm
• 🔹 Passenger: 40 cm

The mount is also the same (hook 9×3 mm), so the brushes are interchangeable. This also applies Sandero, Lada Largus.

What to do if your wipers squeak?

The creaking occurs due to:

1. Rubber contamination (cleaning with alcohol will help).
2. The graphite coating is worn out (needs replacement).
3. The lever is skewed (check the fastening).
4. Dry glass (use special liquid for glass, not water).

If the squeak appears after replacing the brushes, they are probably wrong type (for example, winter in summer).

Is it possible to restore old wipers?

Partially yes. Try:

• 🔧 Lower the brushes into hot water and soap for 10 minutes (softens the rubber).
• 🔧 Process ribbons silicone grease (not technical silicone!).
• 🔧 Trim the edges of the rubber at an angle of 45° (removes the “fringe”).

But these are temporary measures - after 1-2 months the brushes will still have to be changed.