Connecting a rear view camera to a Nissan radio: instructions with diagrams and tips

Connecting a rear view camera to the standard radio Nissan - a challenge faced by model owners Qashqai, X-Trail, Juke and others when upgrading a car. Even if your car is not equipped with a camera from the factory, it can be installed without replacing the head unit. The main thing is to choose the right equipment and follow the connection diagram, taking into account the wiring features Nissan.

In this article we will go through all the steps: from choosing a compatible camera to setting up automatic activation when reversing. We will pay special attention to the nuances of connecting to standard radios with AV-IN And RCA-inputs, as well as solutions for models without factory preparation. If you are not confident in your abilities, it is better to entrust some steps to an auto electrician, but most of the work can be done yourself.

Which rear view camera should you choose for Nissan?

The first step is to choose a camera that is compatible with your model Nissan. Universal solutions are suitable for most cars, but it is better to give preference to models designed for a specific brand. For example, for Nissan Qashqai J11 or X-Trail T32 Often they use cameras mounted under the factory license plate light.

Main selection criteria:

• 🔍 Resolution: minimum 600 TVL (analog) or 720p (digital). For a clear picture in the dark it is better 1080p.
• 🌙 Night illumination: the presence of IR LEDs (from 6 pieces) for shooting in the dark.
• 🔌 Connection type: RCA (composite) or AHD (for digital radios). Check which input is on your radio.
• 📏 Viewing angle: optimal 120–170°. A wide angle makes parking easier, but may distort the perspective.

For models Nissan with factory preparation (for example, Pathfinder R52 or Murano Z51) original cameras are suitable Nissan with art. 28510-4M00A or 28510-4M01A. They fit perfectly into their original position and do not require modifications to the body. For budget solutions you can consider brands BlackVue, Vantop or Boyo — they offer cameras with a good price/quality ratio.

⚠️ Attention: If your radio does not support AV-IN, will be required video interface (For example, GROM VLine or NavTV Zenec). Its installation is more complicated and may require reflashing the head unit.

Required tools and materials

Before starting work, prepare everything you need. Without the right tools, you risk damaging wiring or interior plastic panels. Here is the minimum set:

• 🔧 Screwdrivers: Phillips (PH2) and flat for removing panels.
• 🔨 Plastic spatulas for dismantling the trim (so as not to scratch it).
• 🔌 Multimeter for checking voltage on wires.
• 📡 Soldering iron with solder or female-male terminals for connecting wires.
• 🧵 Electrical tape or heat shrink tubes for insulation.
• 🔗 Reverse relay (if the radio does not have automatic switching).

Additionally you may need:

• 📏 Drill with a set of drills (if you need to drill a hole for the camera).
• 🖌️ Sealant for processing camera mounts (for example, ABRO).
• 🔄 Video cable extension (if the standard wire from the camera is not enough to reach the radio).

For models Nissan with the system Around View Monitor (For example, X-Trail T33) may be required matching block to integrate an additional camera into the standard system. Its cost starts from 8,000 rubles, so check compatibility before purchasing.

Connection diagrams for the camera to the Nissan radio

The connection diagram depends on the type of radio and the availability of factory preparation. Let's consider three main options:

1. Connection to the standard radio with AV-IN

If your radio has a connector AV-IN (usually located at the back), the process is as simple as possible:

1. Connect video input cameras to RCA- radio input (yellow connector).
2. Connect positive wire cameras with a reverse wire (usually orange-black or green-yellow in the rear light harness).
3. Minus Connect the cameras to the body or the negative terminal of the battery.
4. Set the radio to automatically switch to the camera when you engage reverse gear (in the menu Settings → Camera).

2. Connection via video interface (if not AV-IN)

For radios without video input (for example, in basic versions Nissan Almera G15 or Tiida C13) you will need a video interface. Popular models:

• 📺 GROM VLine VL2 - supports RCA And HDMI, is integrated into the standard menu.
• 🔌 NavTV Zenec ZE-NC2010 - for radios with Nissan Connect.
• 🖥️ Dension Gateway 500 - a universal solution for most head units.

Interface connection diagram:

Камера (RCA) → Видеоинтерфейс (RCA-IN)
Видеоинтерфейс (CAN/LIN) → Штатная магнитола
Питание интерфейса: +12В (от прикуривателя или ACC)

3. Connection to the radio with Around View Monitor

For all-round viewing systems (for example, in Nissan Murano Z52) required matching block, since the standard video processing module does not support connecting additional cameras directly. Popular solutions:

• 🔄 Rear View Safety RVS-770613 — emulates the signal from a standard camera.
• 📡 Boyo VTL375 - supports integration into Around View.

Radio type	Required equipment	Difficulty connecting
C AV-IN (For example, Nissan Connect)	Camera with RCA, reverse relay	Low
Without AV-IN (basic versions)	Video interface (GROM, NavTV), camera	Average
C Around View Monitor	Coordination unit, camera with AHD	High

Step-by-step instructions for installing the camera

Let's look at the universal installation algorithm using an example: Nissan Qashqai J11. For other models (X-Trail, Juke) the steps are similar, but the location of the connectors may differ.

1. Removing the trunk trim:

   Carefully remove the plastic trim above the license plate. B Qashqai it is attached with 4 clips. Use a plastic spatula to avoid breaking the latches.

2. Camera Installation:

   If the camera is universal, drill a hole with a diameter 18–20 mm in the room lamp. For original cameras Nissan fastening is already provided.

3. Cable laying:

   Route the video cable from the camera to the radio along the right side of the car (under the trim). B Nissan There are usually technological holes with rubber seals - use them so as not to drill into the body.

   💡

   To prevent the cable from dangling, secure it with plastic ties to the existing wiring.

4. Power connection:

   Locate the reverse wire in the taillight harness (color varies by model, check with a multimeter). Connect the positive wire of the camera to it via a relay, if required.

5. Connection to radio:

   Remove the radio (in Nissan Usually it is enough to remove it from the slide by pressing the latches on the sides). Connect RCA-cable to video input.

6. Settings:

   In the radio menu (Settings → Camera) activate automatic switching. If there is no option, check the reverse wire connection.

The camera is securely fixed|The video cable is not pinched by the casing|The polarity of the power connection is correct|The video input of the radio is activated in the menu-->

Setting the camera to turn on automatically

If, after connecting, the camera does not turn on automatically when reversing, the problem may be in one of three places:

1. Incorrect reverse wire connection - check with a multimeter for presence +12V on the wire when reverse gear is engaged.
2. Lack of settings in the radio - in some models Nissan (For example, Note E12) you need to manually activate the camera in the service menu.
3. Relay fault — if an external relay is used, check its functionality.

For radios Nissan Connect path to settings:

Menu → Настройки → Камера → Автопереключение: ВКЛ

If the option is missing, you may need activation via diagnostic scanner (For example, Consult-III Plus or Launch X431). In the service menu you need to enable the option Rear Camera Enable.

⚠️ Attention: On some models Nissan (For example, X-Trail T31) after connecting the camera an error may occur P1610 (parking system malfunction). To reset it, disconnect the battery for 10 minutes or use a scanner.

How to enter the Nissan Connect service menu?

1. Turn off the ignition.

2. Press the button Menu on the radio and turn on the ignition.

3.Hold the button for 10 seconds until the menu appears Engineer Mode.

4. Select Camera Settings and activate Auto Switch.

Common mistakes and their solutions

Even with careful connection, problems may arise. Here are the most common ones and how to fix them:

Problem	Possible reason	Solution
Camera won't turn on	No power on reverse wire	Check the fuse F30 (10A) in the cabin block. Test the wire with a multimeter.
Image black and white	Incorrect connection RCA or incompatible standard (PAL/NTSC)	Check the camera settings (switch the standard in the menu or on the body).
Screen noise	Poor contact or close position of the video cable to the power wiring	Use shielded cable and insulate connections.
The camera works constantly	The power cord is connected to +12V (ACC), not to the reverse wire	Reconnect the positive wire to the correct terminal (see diagram for your model).

On Nissan models with the Bose system (for example, Qashqai 2018+), the camera may not work due to a conflict with the audio system. The solution is to install a 1 kOhm resistor between the positive wire of the camera and ground.

If after connection the message appears on the screen No Signal, check:

• 🔌 Connection RCA- connector (sometimes the contact oxidizes).
• 📡 Video input settings in the radio (perhaps the wrong source is selected).
• 🔋Voltage on the camera (must be 12V when engaging reverse gear).

Additional improvements: parking sensors and lane markings

To make parking even more convenient, you can add a rear view camera:

• 🎯 Dynamic marking lines — show the trajectory of movement depending on the angle of rotation of the steering wheel. To do this you need a camera with support ADC (For example, Boyo VTL425).
• 🚨 Parktronics - connect to the radio via AUX or a separate display block. Popular models: ParkMaster 4, Sho-Me G-600.
• 📱 Wireless module — to transfer images to a smartphone (useful if the radio does not support video). Example: Vantop H612.

To integrate parking sensors into the standard radio Nissan block is often used Rear View Safety RVS-062913. It converts audio signals from sensors into visual cues on the screen. Connection:

1. Install the sensors into the bumper (standard holes are available in most models Nissan).
2. Connect the parking sensor control unit to power (+12V and mass).
3. Connect the block output to AUX-IN radio or separate display.

If you want the marking lines on the camera to correspond to the actual dimensions of the car, calibrate them:

1. Park the car on a level surface.
2. From the camera menu, select Calibration.
3. Follow the instructions on the screen (usually you need to drive up to a vertical line at a distance 1–1.5 m).

FAQ: Frequently asked questions about connecting a camera to Nissan

Is it possible to connect a camera to a radio without AV-IN?

Yes, but you will need a video interface (for example, GROM VLine or NavTV). It converts the signal from the camera into a format understandable by the standard radio. The cost of such a solution is from 5,000 to 15,000 rubles.

Which camera to choose for Nissan X-Trail T32?

For X-Trail T32 the original camera will do Nissan with art. 28510-4M01A or universal models with mounting under the license plate lamp (for example, BlackVue DR590X-2CH). Pay attention to the viewing angle - it’s better for a tall body 170°.

Why does the camera show an upside-down image?

This means that the camera is installed upside down or the mode is turned on in the settings. Mirror (mirror). Check the camera orientation and reset the settings in the radio menu.

Do I need to code the radio after connecting the camera?

In most cases no, but on some models (for example, Nissan Leaf or Ariya) the function may need to be activated via diagnostic equipment. This is due to the blocking of non-standard devices.

How to protect your camera from moisture?

Use a sealant (eg Silikon-Fett) to process the camera mount. You can also install an additional visor over the lens if the camera protrudes beyond the dimensions of the body.