Nissan Almera N16 (2000–2006) is a popular sedan whose electrical circuit still raises questions among owners. One of the key points of maintenance is the ability to quickly find and replace a burnt-out fuse. But where are they located? How not to mix up blocks? And what to do if after replacement the problem does not go away?
In this article you will find exact fuse locations for Almera N16 with gasoline engines QG15DE (1.5 l) and QG18DE (1.8 l), as well as diesel YD22DDTi. We'll look at:
- 📍 Where are the main fuse boxes located? (in the cabin and under the hood)
- 🔧 How to properly remove and check fuses without the risk of damaging contacts
- ⚡ Typical causes of burnout and how to avoid them
- 🔍 What to do if the fuse burns repeatedly after replacement
All schemes are confirmed by manuals Nissan and experience of auto electricians. If your Almera N16 suddenly lost the light, the power windows stopped working or refuses to start - start diagnosing with the fuses!
Where are the fuse boxes in Nissan Almera N16
B Almera N16 fuses are distributed according to three main blocks:
- Main unit in the cabin (to the left of the steering wheel, under the instrument panel).
- Relay and fuse box under the hood (near the battery).
- Additional block (in some trim levels - behind the glove compartment or under the center console).
The most popular - salon unit. To get to it:
- Open the driver's door.
- Press the block cover latch (located to the left of the steering column, under the plastic trim).
- Carefully pull the cover towards you - it is secured with latches.
Attention! On diesel versions Almera N16 (YD22DDTi) the fuse box under the hood may have a different numbering - see the section “Features of diesel modifications”.
- In the salon block
- Under the hood
- In the relay block
- I don't know where to look
Fuse diagram in the interior block (2000–2006)
The salon unit contains most fusesresponsible for lighting, audio system, cigarette lighter and power windows. Below is the current diagram for Almera N16 with left-hand drive (for right-hand drive models, the numbering may differ!).
| Fuse no. | Denomination (A) | Purpose | Symptoms of a problem |
|---|---|---|---|
| 1 | 10 | Side light (left side), license plate light | Left side lights or license plate lights do not light up |
| 7 | 10 | Cigarette lighter, 12V socket | The cigarette lighter does not work, devices do not charge |
| 12 | 15 | Audio system, antenna, navigation (if installed) | The radio does not turn on, there is no sound |
| 18 | 20 | Electric windows (all 4 windows) | Windows don't go up/down |
| 25 | 10 | Engine control unit (ECU), immobilizer | Engine won't start, "Check Engine" light is on |
Full diagram with numbering from 1 to 30 you will find in spoiler at the end of the article. Please note: fuses №2, №4 And №6 often are responsible for circuits associated with 安全ness (ABS, airbags). Replacing them without diagnostics can be dangerous!
Before replacing a fuse, always check it with a tester or visually for a broken filament. Even if it looks “intact”, the contact inside could burn out.
Fuses under the hood: what is located there
Block under the hood Nissan Almera N16 is located to the right of the battery (if you look in the direction of travel). It is protected by a plastic cover with the inscription FUSE & RELAY BOX. Here are located:
- 🔋 Generator power fuse (typically 100-120A, large size).
- ⚡ Cooling Fan Circuit Fuses (30–40 A).
- 💡 Starter and fuel pump relay (often confused with fuses!).
- 🚗 Main relay fuse (ECU) - if it burns out, the car will not start.
Important nuance: in this block are used Blade type fuses large size. They cannot be replaced with standard “mini” fuses from the interior unit! When purchasing new ones, look at the markings:
MAXI- for currents of 30–100 A (for example, a generator).ATO— for currents of 10–30 A (fan, headlights).
⚠️ Attention: If, after replacing the fuse under the hood (for example, 100 A), it blows again - don't bug (wire or coin). This may cause a fire! Immediately check the generator or wiring for short circuits.
How to properly check and replace fuses
Even if you have never held a tester in your hands, check the fuse in Almera N16 you can three ways:
- Visually: take out the fuse and look at the light - if the thread inside is broken, it has burned out.
- Tester (multimeter): turn on the “dialing” mode and touch the contacts with the probes. A beep means the fuse is good.
- "To the spark": insert the fuse into the socket and turn on the circuit (such as the headlights). If it sparks, the fuse is faulty.
Turn off the ignition and remove the terminal from the battery|Find the number of the required fuse in the diagram|Check it with a tester or visually|Make sure that the new fuse is of the same rating|After replacing, check the operation of the circuit-->
If the fuse blows again, don’t rush to install a more powerful one (for example, instead of 10 A - 15 A). This could fry the wiring! First find the reason:
- 🔌 Short circuit in the circuit (check the wires for exposed areas).
- 💦 Moisture ingress into the fuse box (often happens after washing).
- 🔥 Faulty relay (for example, the fan relay may short out).
If the fuse burns out immediately after replacement, the problem is not in it, but in the circuit. Diagnostics of the wiring or consumer (for example, window lifter motor) is required.
Features of fuses in diesel Almera N16 (YD22DDTi)
Diesel versions Almera N16 with engine YD22DDTi have a few key differences in the fuse diagram:
- Additional relay block to control the high pressure fuel pump (HPF).
- 30A fuse for glow plugs (located under the hood, next to the fuel injection pump relay).
- Separate ECU fuse (20 A), responsible for the operation of the electronic diesel control unit.
If your diesel won't start in cold weather or stalls while driving, first check:
- 🔥 Fuse
№15in the cabin unit (10 A) - responsible for temperature sensors. - ⚡ Fuse
№20under the hood (30 A) - power supply for glow plugs. - 🛢️ Injection pump relay (black, with the inscription
FUEL PUMP).
What happens if you mix up the fuses on a diesel engine?
For example, putting 15 A on the sensors instead of 10 A can lead to failure of the ECU or burnout of the fuel injection pump wiring. Diesel systems are more sensitive to voltage surges, so always use fuses strictly according to the diagram!
Common problems and their solutions
Here TOP-5 breakdownsrelated to fuses in Almera N16, and how to eliminate them:
-
Power windows don't work
🔹 Reason: fuse blown
№18(20 A) or relay№7in the salon block.🔹 Solution: Replace the fuse and check the window motors for jamming.
-
Headlights do not light (low/high beam)
🔹 Reason: fuses
№3(10 A) and№5(10 A) or relay№4.🔹 Solution: If the headlights do not light up after replacing the fuse, check the lamps and wiring.
-
Cigarette lighter doesn't work
🔹 Reason: fuse
№7(10 A) or oxidation of contacts in the socket.🔹 Solution: replace the fuse and clean the contacts with alcohol.
If the problem is not the fuse, but the relay, it can be checked “by ear”: when the circuit is turned on, a working relay makes a slight click. If there is no click, the relay is faulty.
⚠️ Attention: On Almera N16 with air conditioner fuse №10 (10 A) is responsible for the operation of the compressor. If it burns out, the air conditioner will not turn on, but the heater fan will blow.
Full fuse diagram for Nissan Almera N16 (2000–2006)
Below - decoding of all fuses in the cabin unit for petrol versions. For diesel models, see note above.
| № | Denomination (A) | Purpose | Notes |
|---|---|---|---|
| 1 | 10 | Side light (left side), license plate light | If the left lights do not light up, also check the lamp |
| 2 | 10 | Side light (right side) | — |
| 3 | 10 | Low beam (left headlight) | Often burns out when installing LED lamps |
| 4 | 10 | Low beam (right headlight) | — |
| 5 | 10 | High beam (both headlights) | If the high beam does not work, also check the relay №5 |
| 6 | 15 | Turn signals and hazard warning lights | If it blinks too quickly, check the lamps |
| 7 | 10 | Cigarette lighter, 12V socket | Often fails when connecting powerful devices |
| 8 | 10 | Rear fog light | — |
| 9 | 15 | Front fog light | Check also the relay №6 |
| 10 | 10 | Air conditioning compressor | If the fuse is intact, but the air conditioner does not work, check the freon pressure |
| 11 | 10 | ABS (anti-lock braking system) | If the ABS light is on, also check the sensors on the wheels. |
| 12 | 15 | Audio system, antenna | If the radio does not turn on, also check the fuse in its housing. |
| 13 | 10 | Dashboard, speedometer, tachometer | If the arrows do not work, also check the ECU |
| 14 | 10 | Brake lights | If the stop lights do not light up, also check the switch on the brake pedal |
| 15 | 10 | Temperature and fuel level sensors | If the fuel needle is lying, also check the float in the tank |
| 16 | 10 | Rear wiper | — |
| 17 | 15 | Heated rear window | If it doesn’t heat up, also check the contacts on the glass. |
| 18 | 20 | Power windows | If the fuse is intact, but the windows do not work, check the motors |
| 19 | 10 | Central locking, alarm | If the doors do not close, also check the actuators |
| 20 | 10 | Speed sensor, cruise control | If the speedometer does not work, also check the cable |
| 21 | 15 | Heater fan (stove) | If the heater does not blow, also check the motor resistor |
| 22 | 10 | Interior and trunk lighting | — |
| 23 | 15 | Beep | If the horn does not work, also check the relay №8 |
| 24 | 10 | Engine control unit (ECU) | Never replace with a fuse of a higher rating - this may burn the ECU! |
| 25 | 10 | Immobilizer, ignition system | If the car does not start, also check the chip in the key |
| 26 | 10 | Reserve | — |
| 27 | 15 | Reserve | — |
| 28 | 20 | Reserve | — |
| 29 | 30 | Electric power steering (if equipped) | If the steering wheel has become heavier, also check the power steering pump. |
| 30 | 10 | Reserve | — |
If in your Almera N16 fuses are located differently - perhaps you have restyled version (2003–2006) or a car for another market (for example, for Japan). In this case, check the sticker on the back of the unit cover.
FAQ: Frequently asked questions about Almera N16 fuses
Is it possible to install a fuse of a higher rating if it constantly blows?
No! This may lead to wiring fire or failure of expensive components (for example, ECU). If the fuse blows repeatedly, look for short circuit in the circuit or a faulty consumer (for example, a window lift motor).
Where is the fuse for the radio?
In the cabin unit this is a fuse №12 (15 A). If the radio does not work after replacement, also check its own fuse (usually located on the back of the device).
Why does the cigarette lighter fuse blow even if nothing is connected?
The reasons may be the following:
- 🔌 Short circuit in the cigarette lighter wiring (check the wires under the panel).
- 💧 Oxidation of contacts in the socket (clean with alcohol).
- 🔋 12V socket malfunction (the contacts may have shorted inside).
How to check the relay in the fuse box?
The easiest way is swap places with a known good relay (for example, a fan relay). If after replacement the circuit works, the relay is faulty. You can also check with a tester:
- Set the multimeter to dialing mode.
- Connect the probes to the contacts
85And86(relay coil). - If the resistance is infinite, the relay is burned out.
Where to buy fuses for Almera N16?
Suitable fuses are sold:
- 🏬 In auto stores (for example, Autodoc, Exist, Lada-Image).
- 🛒 In online stores (AliExpress, Wildberries — search for “blade fuse 10A”).
- 🚗 On disassembly (if you need original Nissan).
For Almera N16 standard fuses fit mini blade type (for the cabin unit) and «maxi blade» (for the engine compartment).