Nissan Almera G15 is one of the most popular sedans on the Russian market, but even such a reliable car has a windshield that requires replacement on average every 3–5 years. The reasons vary: from normal wear and tear to cracks after being hit by a stone on the highway. In this article we will analyze all the nuances of choosing and replacing a windshield for Almera G15 (2012–2022), including original articles, analogues, prices and step-by-step instructions with photos.

You will learn how to distinguish high-quality glass from counterfeit, what Manufacturers supply glass to the Nissan assembly line, and why even a minor crack can result in problems with system sensors ADAS. Also, where is the best place to order a replacement so as not to overpay for labor and materials.

Original windshield Nissan Almera G15: articles and sizes

Official windshield for Almera G15 (body B17) has a standard size 1430×850 mm and is available under several articles depending on the configuration:

  • 🔹 26510-BM40A — basic version without sensors (for cars before 2016);
  • 🔹 26510-BM40B — with a camera mounting area LDWS (lane departure warning system);
  • 🔹 26510-4M01A — for restyled models (2019–2022) with a light/rain sensor.

Important: glass for Almera G15 And Nissan Sentra (American version) not interchangeable - they have different bending radii at the bottom. Please also note the availability tinted strip (sun protection) - on original glasses it has a gradient transition, and on cheap analogues it often has a sharp border.

Article Applicability Features Average price (2026)
26510-BM40A Basic equipment (until 2016) Without sensors, tinted strip 15 cm 12 000–15 000 ₽
26510-BM40B With camera LDWS Sensor mounting area, reinforced edge 18 000–22 000 ₽
26510-4M01A Restyling (2019–2022) With light/rain sensor, improved sound insulation 20 000–25 000 ₽

⚠️ Attention: If your Almera G15 equipped with a system ADAS (adaptive cruise control, traffic sign recognition), after replacing the glass you will need camera recalibration. Without this, the sensors will not work correctly, and the system may generate false alarms.

📊 Which glass would you prefer for your Almera G15?
  • Original (Nissan)
  • Premium analogue (Pilkington, AGC)
  • Budget analogue (XYG, Benson)
  • I don't know, I haven't chosen it yet

Top 5 glass manufacturers for Nissan Almera G15: what to choose?

In addition to original glasses, there are analogues from different brands on the market. We analyzed reviews from owners and service centers and compiled a rating of the best manufacturers:

  1. Pilkington (UK) — supplier for the conveyor Nissan. The glass has ideal geometry and increased strength (thickness 4.8 mm versus 4.2 mm for cheap analogues). Article: NN11430GTN.
  2. AGC (Japan) - another official partner Nissan. Are different improved sound insulation and precise fit. Article: JN11430GSN.
  3. Saint-Gobain Sekurit (France) - premium segment. Glass passes 5-step quality control and are protected from UV rays. Article: SG11430GT.
  4. XYG (China) - a budget option with acceptable quality. Suitable for cars without ADAS. Article: XYG-NIS1430.
  5. Benson (Taiwan) - middle price segment. Counterfeits are common, so buy only from authorized dealers.

🔍 How to distinguish a fake? The original glass or a high-quality analogue must have:

  • 📌 Manufacturer's logo (engraved, not sticker);
  • 📌 Marking E1 or E4 (certification for Europe);
  • 📌 Production date (printed on the edge);
  • 📌 Hologram or QR code for authentication.
What happens if you install low-quality glass?

Non-original low quality glass can:

- **Distort the view** due to improper bending (especially noticeable at night);

- **Crack at the slightest impact** (thickness less than 4 mm);

- **Pass UV rays**, which leads to burnout of the dashboard;

- **Cause false sensor alarms** ADAS due to improper refractive power.

When to replace your windshield: 5 critical cases

Not every crack requires immediate replacement, but there are situations when it is impossible to pull:

  1. Crack longer than 10 cm - even if it does not interfere with visibility, vibrations at speed can lead to crack propagation all over the glass.
  2. Chip in the driver's viewing area — distorts the headlights of oncoming cars, especially dangerous "stars" from stones.
  3. Damage to glass edge - breaks the tightness, can lead to body corrosion.
  4. Crack near sensors ADAS — even a small chip can block the camera’s operation.
  5. Peeling of the tinted strip - sign aging glass, which can fly apart in an accident.

⚠️ Attention: If on your Almera G15 system installed LDWS (lane departure warning), even a small crack in the top of the glass can completely disable it. The camera sensor is fixed on an adhesive base, and vibrations from damaged glass disrupt its settings.

💡 Advice: Before replacing the glass, check to see if your CASCO insurance. Many policies cover windshield replacement without loss of bonus (if the damage is not the fault of the driver). For example, in RESO And Ingosstrakh this is included in the basic package.

View the glass article number in the vehicle documentation|

Check availability of sensors ADAS|

Check the tightness of the seal (signs of rust under the glass)|

Take a photo of the old glass sticker for comparison|

Find out from the specialist whether recalibration of the cameras is required -->

Step-by-step instructions for replacing a windshield with Nissan Almera G15

Replacing glass is a labor-intensive process, and without experience it is better to entrust it to professionals. But if you decide to do it yourself, follow these instructions:

1. Preparing tools

You will need:

  • 🔧 Glass cutting string (it’s better to take with handles, for example, HELLA 8PG 355 007-131);
  • 🔧 Suction cups for removing glass (minimum 2 pieces);
  • 🔧 Sealant primer (For example, 3M 08609);
  • 🔧 Adhesive sealant (SikaTack Drive or Dow Automotive Betaseal);
  • 🔧 Construction hair dryer (to warm up old glue).

2. Removing old glass

Carefully remove the weatherstripping and perimeter moldings. Then:

  1. Heat the glue along the contour of the glass with a hairdryer (temperature ~60°C).
  2. Pass the string under the glass and start cutting the glue, moving from one corner to the other.
  3. When the glass separates, remove it using suction cups (it is better to work with an assistant).

⚠️ Attention: Do not use a knife or chisel to remove glass - this may damage paint on body pillars. Also be careful with sensor wiring, if they are installed.

3. Installation of new glass

Before installation:

  • Clean the seat from old glue (you can use solvent 646).
  • Apply primer to the body edge and glass (this will improve adhesion).
  • Apply sealant-adhesive to the glass (layer thickness ~5 mm).
  • Install the glass starting from the bottom edge and press it evenly.

🔧 Important: After installation, do not slam doors or turn on the heater/air conditioner for 2–3 hours - this may move the glass before the glue dries completely.

💡

If you are replacing glass with sensors ADAS, don't forget to calibrate your cameras! To do this you need a diagnostic scanner (for example, Launch X431) and special software. In the service, this service costs 3,000–5,000 rubles.

How much does it cost to replace a windshield? Nissan Almera G15 in 2026?

The cost of replacement depends on the type of glass, region and service. On average prices are as follows:

Glass type Glass price (₽) Cost of work (₽) Total (₽)
Original (without sensors) 12 000–15 000 5 000–7 000 17 000–22 000
Original (with ADAS) 18 000–22 000 7,000–10,000 (+ calibration 3,000–5,000) 28 000–37 000
Pilkington/AGC (premium) 9 000–12 000 5 000–7 000 14 000–19 000
XYG/Benson (budget) 4 000–6 000 4 000–6 000 8 000–12 000

💰 Where is it cheaper? In the regions, the cost of work is 20–30% lower than in Moscow or St. Petersburg. For example, in Yekaterinburg, replacing the original glass will cost 18 000–20 000 ₽, and in the capital - 22 000–25 000 ₽.

⚠️ Attention: If you are offered glass replacement for less than 10,000 ₽ (including work) are most likely to be used non-certified glue or glass of questionable quality. This may lead to glass peeling off at speed or leaks during rain.

💡

Saving on the quality of glass or glue can result in expensive body repairs. Original materials guarantee tightness and safety for 5+ years.

Common mistakes when replacing a windshield and how to avoid them

Even services sometimes make mistakes that then have to be corrected. Here are the most common:

  • 🚫 Using the wrong glue - for example, silicone sealant instead of polyurethane. This leads to glass peeling in 1–2 years.
  • 🚫 Incomplete cleaning of the seat - Remains of old glue or rust impair adhesion.
  • 🚫 Incorrect installation of moldings - if you overtighten them, the glass may crack.
  • 🚫 Ignoring calibration ADAS — the sensors will produce false signals.
  • 🚫 Saving on primer — without it, the glue does not adhere well to the metal.

🔧 How to check the quality of work? After replacement:

  1. Check tightness — water the glass with water from a hose (there should be no leaks into the interior).
  2. Inspect glass edge - the glue should be uniform, without bubbles.
  3. Test sensors ADAS (if any) - the system should not generate errors.

Where is the best place to replace your windshield? Nissan Almera G15?

The choice of service depends on your budget and quality requirements. Let's look at the pros and cons of each option:

Service type Pros Cons Average price (₽)
Official dealer Nissan 1–2 year warranty, original materials, calibration ADAS included Expensive, long (registration for 1–2 weeks) 25 000–35 000
Specialized auto glass center Fast (1–2 days), experienced craftsmen, 6–12 month warranty Not all centers work with ADAS 15 000–25 000
Multi-brand service Prices are lower than at the dealer, you can choose the glass yourself The quality depends on the master, there is no specialized equipment 12 000–20 000
Self-replacement Minimum costs (if you have a tool) High risk of errors, no guarantee 5 000–10 000

💡 Advice: Before choosing a service, read reviews on Yandex.Maps or 2GIS. Pay attention to the photographs of the work - if the salon is dirty and the tools are old, it is better to look for another center.

📌 Top 3 services according to owner reviews Almera G15:

  1. "Avtoglass Profi" (network in Russia) - they specialize in Japanese cars, they give a 2-year guarantee.
  2. "Glass Drive" — mobile service (they come to you), work with ADAS.
  3. "Nissan Service Plus" (Moscow, St. Petersburg) is an official partner, but prices are 10–15% lower than those of the dealer.

FAQ: Frequently asked questions about windshields Nissan Almera G15

Is it possible to drive with a crack in the windshield?

If a crack less than 5 cm and not in the driver’s line of sight, you can drive, but it’s better to seal it polymer glue (For example, Permatex 09103). If the crack is longer or comes from the edge - glass needs to be changed, as it may fly apart when hitting a bump.

How long does it take to replace glass?

In the service, the procedure takes 1.5–2 hours (without calibration ADAS). If sensors need to be recalibrated, add more 1–1.5 hours. If you replace it yourself, it will take a beginner 3–4 hours.

Can I install glass from another Nissan model?

No, the glass is from Sentra, Tiida or Note won't fit - they have a different bending radius. The only option is glass from Nissan Almera Tino (but only for pre-restyling models G15 until 2016), but they also require adjustment.

What should I do if, after replacing the glass, a whistling noise appears at speed?

The whistle occurs due to loose fit of moldings or uneven layer of glue. Solution:

  1. Check the seals around the perimeter of the glass.
  2. If the whistle is on the side, tighten the moldings or replace them.
  3. If there is a whistle from above, the glass may be installed skewed (it needs to be re-glued).

How to care for a new windshield?

To make glass last longer:

  • 🧼 Wash glass without abrasives (use auto glass fluids).
  • 🚗 Avoid sudden temperature changes (do not pour boiling water on ice in winter).
  • 🔧 Check once a year glue tightness (especially after winter).
  • 🛡️Apply protective film (For example, LLumar) - it will prevent chipping from stones.