Owners Nissan Note E11 (2006–2013) are often faced with the need to replace the standard radio - be it due to outdated functionality, breakdown or desire to get modern options like Apple CarPlay, Android Auto or rear view cameras. However, choosing a suitable device for this model is not so simple: you need to take into account the non-standard size of the seat, the features of connecting to standard electrical equipment and compatibility with steering wheel buttons.

In this article we will look at everything you need to know about radios for Nissan Note E11: from standard sizes and types of devices to step-by-step instructions for installation and configuration. You will learn which models are best to choose for different budgets, how to avoid mistakes when connecting, and what to do if the speakers or steering do not work after installation. And also - unique nuances specifically for the E11, which are not mentioned in general car audio guides.

Standard sizes and types of radios for Nissan Note E11

The main difficulty when choosing a radio for Nissan Note E11 - non-standard seat. Unlike most cars, which use the format 1DIN (178×50 mm) or 2DIN (178×100 mm), used here unique size:

  • 📏 Width: 182 mm (versus standard 178 mm)
  • 📏 Height: 50 mm (1DIN) or 100 mm (2DIN)
  • 🔧 Mount: non-standard slides (requires adapter or modification)

This means that conventional radios Pioneer, Sony or JVC will not fit without a transition frame. Three solutions:

  1. Universal 1DIN/2DIN with adapter. You will need to purchase an extension frame (for example, Metra 99-7302 for 2DIN).
  2. Radios with support ISO- connectors. They are connected via an adapter to the standard wiring.
  3. Models from Nissan (OEM). For example, Nissan Connect from newer models, but they are expensive and require firmware.

Important: if you choose 2DIN-device, check if it is blocking climate control or control buttons on the center console. B Note E11 The panel is located compactly, and some radios may block access to the controls.

📊 What kind of radio are you planning to install?
  • 1DIN (standard)
  • 2DIN (with screen)
  • OEM (Nissan original)
  • Other

Top 5 radios for Nissan Note E11: 2026 rating

We analyzed owner reviews and technical specifications to rank the best radios for Nissan Note E11. Compatibility, functionality and price/quality ratio were taken into account.

Model Type Features Price, ₽
Pioneer SPH-DA160DAB 2DIN Apple CarPlay, Android Auto, DAB+, rear view camera 28 000–32 000
Sony XAV-AX5500 2DIN 10.1" screen, wireless CarPlay, fast loading 45 000–50 000
JVC KW-M560BT 1DIN Retractable screen, Bluetooth, USB, button illumination 18 000–22 000
Alpine iLX-W650 2DIN 7" screen, wireless CarPlay, camera compatible 35 000–40 000
Nissan Connect (OEM) 2DIN Original firmware, support for Nissan services, navigation 50 000–70 000

⚠️ Attention: Upon purchase Nissan Connect check the firmware version. Radios from Note E12 (2013+) may not be suitable for E11 without modification of the CAN bus.

Suitable for a budget option JVC KW-M560BT — it is compact and does not require complex installation. If you need a large screen and wireless technology, pay attention to Sony XAV-AX5500, but be prepared to pay for a mount adapter.

Step-by-step instructions for installing a radio in a Nissan Note E11

Installing a radio in Nissan Note E11 requires care, especially if you are doing this for the first time. Below are detailed instructions taking into account the nuances of this model.

Remove the negative terminal from the battery

Prepare tools: screwdrivers (Phillips, flat), plastic spatulas, wire cutters

Purchase a transition frame (if needed)

Check the completeness of the radio (wires, fastenings, instructions)

-->

Step 1. Dismantling the old radio.

  1. Remove the decorative frame around the radio. It is attached with latches - pry it off from the side with a plastic spatula.
  2. Unscrew the 4 screws (at the corners) with a Phillips screwdriver.
  3. Carefully pull out the radio and disconnect the connectors ISO and antennas.

Step 2. Connecting a new radio.

  • 🔌Connect ISO adapter (if required) to standard wiring. Color scheme:
    • Yellow - +12V (permanent)
    • Red - ACC (ignition)
    • Black - mass
    • Blue/White - antenna control
  • 🔊 Connect the speakers (front: gray/white, rear: green/purple).
  • 📡 Connect the antenna cable (connector DIN).

Step 3. Installation and fastening.

Insert the radio into the seat, secure it with a slide or adapter. Make sure it doesn't wobble or block the climate control buttons. Connect the battery terminal and check operation.

💡

If after installation the steering buttons do not work, you will need CAN adapter (For example, PAC RP4-NIS01). It emulates the signals from the standard radio and allows you to control the new one through the steering wheel.

Connecting a rear view camera and other accessories

One of the main reasons for replacing the radio in Nissan Note E11 - desire to add rear view camera. However, there are nuances here:

  • 📹 Camera resolution: optimal 720p or 1080p (cheap models give strong distortions when shooting at night).
  • 🔌 Connection: The camera is connected to the connector RCA on the radio (usually marked as CAM IN).
  • 🚗 Installation location: in Note E11 It is more convenient to mount the camera above the license plate (you will need to drill a hole for the wire).

To automatically turn on the camera when reversing:

  1. Connect the camera wire (+12V) to reverse lamp (pink wire in the headlight harness).
  2. In the radio settings, activate the option Reverse Camera Trigger.

⚠️ Attention: If the image flickers or disappears after connecting the camera, check grounding. B Note E11 Often there are problems with the ground on the body - it is better to run a separate wire to the battery.

How to connect a USB hub to the radio?

To connect a USB hub (for example, to charge a phone and a flash drive at the same time), use Y-splitter powered by cigarette lighter. B Note E11 The standard USB port of the radio is often not enough to power two devices, so the splitter must have an external power supply (5V/2A).

Other popular accessories:

  • 🎵 Sound amplifier: if the stock speakers are weak, this will do Alpine KTP-445U (compact, installed behind the radio).
  • 📡 DAB adapter: for receiving digital radio (for example, Pioneer GEX-DAB01).
  • 🔋 Capacitor: if the radio turns off with bass (the problem is a weak battery in Note E11).

Typical problems after installation and their solutions

Even with proper installation, owners Nissan Note E11 often encounter problems. Let's look at the most common ones:

Problem Reason Solution
Speakers don't work Incorrect wire connection or reversed polarity Check the connection diagram (see section above). Use a tester to check the voltage on the wires.
The radio does not turn on Missing +12V on the yellow wire or poor ground contact Test the wiring with a multimeter. If necessary, run a new cable to the battery.
Steering wheel buttons don't work Missing CAN adapter or incorrect firmware Install the adapter PAC RP4-NIS01 and configure it according to the instructions.
Noise in the speakers Poor grounding or interference from other devices Lay a separate ground wire. Use ferrite beads on power supply.

⚠️ Attention: If after installation the radio stops working regular clock or climate control, check the fuses F37 (10A) and F40 (7.5A) in the block under the steering wheel. B Note E11 they are responsible for powering the instrument panel and can burn out if there is a short circuit.

Another common problem is Automatic turn off of the radio when playing bass. This is due to a weak battery or thin power cables. Solutions:

  • Install a capacitor with a capacity 1 Farad next to the radio.
  • Replace the standard power wires with thicker ones (cross-section no less than 4 mm²).
  • Check the battery voltage (must be at least 12.6V at idle).

Sound settings: how to get the most out of standard acoustics

Standard acoustics Nissan Note E11 does not shine with quality, but even with it you can achieve acceptable sound. Here are the key settings:

1. Equalizer (EQ).

Most radios have presets (Pop, Rock, Classic). For Note E11 optimal user profile:

  • 🎛️ Low frequencies (Bass): +2–3 dB (at frequency 80–100 Hz).
  • 🎛️ Mid frequencies (Mid): 0 dB (so as not to drown out vocals).
  • 🎛️ Treble: +1–2 dB (for brightness, but no hiss).

2. Balance and fader.

B Note E11 The front speakers are located low (in the doors), and the rear speakers are located high (on the shelf). To make the sound uniform:

  • Install fader on +1 (offset towards rear speakers).
  • Balance leave it neutral (0).

3. Crossover.

If your radio supports crossover setting, set:

  • 🔊 Low-frequency speakers (woofers): 80–120 Hz (high frequency cutoff).
  • 🔊 Tweeters (Tweeters): 3–5 kHz (low frequency cut).
💡

If after setting the sound remains “empty”, the problem may be standard speakers. B Note E11 The front speakers often burn out (nominal 4 Ohms, power 20W). Replace them with impedance models 2–4 ohms and power no less 40W (For example, Pioneer TS-A1676F).

Firmware update and additional features

Modern radios (especially with Android Auto or Apple CarPlay) require periodic firmware updates. For Nissan Note E11 this is relevant if:

  • 📱 The radio does not recognize the new smartphone.
  • 🎵 Playing music from a flash drive works with errors.
  • 🗺️ Navigation shows incorrect information.

How to update firmware:

  1. Download the latest firmware from the manufacturer's website (for example, Pioneer or Sony).
  2. Unzip the archive and copy the files to a formatted FAT32 flash drive.
  3. Insert the flash drive into the radio, go to Settings → Software Update.
  4. Follow the instructions on the screen. Don't turn off the power during the process!

⚠️ Attention: When updating firmware on radios Nissan Connect (OEM) may be required activation through dealer. Flashing the firmware yourself with unofficial files will lead to the device being blocked.

Additional features worth setting up:

  • 📍 Geopositioning: if the radio supports GPS, update the maps (for example, via Naviexpert or Navitel).
  • 🔒 Parking: activate the marking lines on the rear view camera (in the camera settings, select Guidelines: ON).
  • 🎧 Bluetooth: For better sound during calls, disable audio codec compression (Settings → Bluetooth → Codec: SBC).

FAQ: Frequently asked questions about radios in Nissan Note E11

Is it possible to install a radio with Android instead of the standard one?

Yes, but you will need:

  1. Mount adapter (e.g. Metra 99-7302).
  2. CAN adapter for steering wheel buttons (PAC RP4-NIS01).
  3. Adapter for connecting to standard wiring (ISO).

Best options: Joying, Atoto or Dasaita (with support Android 10+).

Why does the button backlight not work after installing a new radio?

B Note E11 The backlighting of the climate control and radio buttons is connected via one wire (illumination, orange). If you disabled it during installation, the backlight will disappear. Solution:

  • Locate the orange wire in the radio harness and connect it to +12V through a resistor 220 Ohm.
  • Or use LED strip with separate meals.
How to connect a subwoofer to a standard radio?

There are two ways:

  1. Via high-level input: use signal converter (For example, LC2i), which converts the signal from the speakers into RCA for the subwoofer.
  2. Via low level output: if the radio has an output Sub Out, connect the subwoofer directly.

For Note E11 optimal compact subwoofer Pioneer TS-WX130DA (installed under the seat).

Is it possible to leave the stock speakers when installing a new radio?

Yes, but the sound will be mediocre. State of the speakers Note E11 have low power (20W) and do not reproduce bass well. If you do not plan to change the acoustics, in the radio settings:

  • Disable bass amplifier (Bass Boost: OFF).
  • Install volume limiter on 70–80%so as not to burn the speakers.
Where can I find a wiring diagram for Nissan Note E11?

The official diagram can be downloaded from service manual (registration required). Alternative sources:

Wire colors for radio:

Жёлтый: +12V (постоянный)

Красный: ACC (зажигание)


Чёрный: Масса


Серый: Передний правый динамик (+)


Белый: Передний правый динамик (−)


Зелёный: Задний правый динамик (+)


Фиолетовый: Задний правый динамик (−)