Nissan Almera N16 is a popular sedan that is still actively used on the roads of the CIS. One of the most vulnerable parts of this car is the windshield: over time, it becomes chipped, cracked, or loses its transparency. In this article, we’ll look at how to choose the right replacement, what nuances to consider during installation, and why you shouldn’t skimp on quality.
Windshield Almera N16 (2000–2006) has unique parameters that do not always coincide with analogues for other models Nissan. An error in selection can lead to problems with tightness, airflow, or even the operation of rain sensors (if they are installed). We analyzed the spare parts market, reviews from car owners and recommendations from service centers to create the most complete guide possible.
Windshield Specifications Nissan Almera N16
Original windshield for Almera N16 has the following parameters:
- 📏 Dimensions: 1400x800 mm (may vary slightly depending on the year of manufacture).
- 🔧 Thickness: 4.76 mm (laminated, double layer).
- 🌧️ Presence of a heating zone: optional (on versions with climate control).
- 📡 Rain/light sensor: installed only on top trim levels (for example, SE Luxury).
Important: glass for Almera N16 with bodies sedan And hatchback not interchangeable - they have different geometry in the area of the A-pillar. The glass for cars with right And left steering wheel (mainly by the location of the wiper mounts).
| Parameter | Sedan (2000–2006) | Hatchback (2002–2006) |
|---|---|---|
| Original article number | 28510-4M000 / 28510-4M001 |
28510-4M100 |
| Code by ETIS | NLA16-0001 |
NLA16-0002 |
| Weight, kg | 8,2–8,5 | 7,9–8,1 |
| Tint color (top edge) | Green or gray | Green only |
⚠️ Attention: Glasses for Nissan Sunny N16 (European version Almera), which are visually similar, but have a different seal fastening. Before purchasing, check the article number with the vehicle's VIN code!
Original vs analogues: what to choose for replacement?
Original windshield from Nissan (manufacturer - Asahi Glass Co. or Saint-Gobain Sekurit) will cost 12,000–18,000 rubles. Its main advantages:
- 🔹 Perfect fit without gaps.
- 🔹 Compliance with safety standards (labeling
E1orE4). - 🔹 Guaranteed against optical distortion.
However, many owners choose analogues from trusted brands:
- 💎 Pilkington (UK) - best price/quality ratio (~8,000–10,000 rubles).
- 💎 Sekurit (France) - soft glass, resistant to chips (~9,000–11,000 rubles).
- 💎 XYG (China, but with European control) - budget option (~5,000–7,000 rubles).
- Original (Nissan)
- Pilkington
- Sekurit
- XYG or other analogue
- I haven't decided yet
Among the "no-name" manufacturers (for example, BOS or Fuyao) the risk of running into marriage is higher: possible view distortion, poor fit to the body or rapid cloudiness. It is especially dangerous to buy glass without markings. E (European safety certificate).
Before purchasing, check the glass for clarity: place it on a flat surface and look at it at an angle - high-quality glass should not create “waves” or rainbow stains.
Step-by-step instructions for replacing a windshield
Replacing glass with Almera N16 Requires care and special tools. If you decide to do this yourself, prepare:
- 🔧 A set of plastic spatulas for removing the seal.
- 🔪 A string or knife for cutting sealant (for example, Stanley 10-556).
- 🧴 Glass sealant (3M 08609 or SikaTack).
- 🧲 Suction cups for fixing new glass (minimum 2 pcs.).
Algorithm of actions:
- Removing old glass:
- Disconnect the negative terminal of the battery.
- Remove the wipers and the plastic trim under the windshield (unscrew the 4 screws
T20). - Cut through the caulk with a string, starting from the top corner. Move around the perimeter, pressing the string against the glass.
- Preparing the opening:
- Remove any remaining old sealant with a putty knife or scraper.
- Treat the metal with an anti-corrosion compound (for example, WD-40 Specialist).
- Apply glass primer to the area where the sealant contacts.
- Installing new glass:
- Apply sealant to the body opening (layer thickness - 8–10 mm).
- Using suction cups, carefully install the glass, starting from the bottom edge.
- Press the glass along the perimeter and secure with tape for 1-2 hours.
☑️ What to check after installation
⚠️ Attention: Do not turn on the heated glass for 24 hours after replacement - this may disrupt the polymerization of the sealant and lead to leaks!
Common problems after replacement and their solutions
Even with a professional replacement, troubles can arise:
| Problem | Reason | Solution |
|---|---|---|
| Whistle at speed >80 km/h | Poor seal seal | Tighten fastenings or replace rubber profile |
| Fogging from inside | Interior ventilation is poor or the sealant is applied with tears | Check the ventilation valve under the hood, repeat sealing |
| Cracks in new glass | Manufacturing defect or gravel impact | Contact the seller for warranty (if the crack appeared in the first 3 months) |
| Heating does not work | The conductive thread is damaged or the contacts are oxidized | Test the circuit with a multimeter, clean the contacts |
If after replacement there is glass play (it “walks” when pressed), most likely, a low-quality sealant was used or the installation technology was violated. In this case, complete dismantling and reinstallation is required.
How to check the quality of sealant?
After drying, a high-quality sealant should be elastic (not crumble) and cover the seam evenly. If, when you press on the glass, the sealant “lags behind” the body, this is a sign of defective or incorrect application.
How much does it cost to replace a windshield? Almera N16?
The cost of work depends on the region and level of the service center:
- 🏙️ Moscow/St. Petersburg: 3,500–5,000 rub. (with material - 8,000–15,000 rubles).
- 🏘️ Regions: 2,500–4,000 rub. (with material - 6,000–12,000 rubles).
- 🔧 Garage workshops: 1,500–2,500 rub. (risk of poor installation!).
Saving at work often results in problems. For example, in cheap services they can:
- 🚫Use universal sealant instead of a specialized one.
- 🚫 Do not remove the cover under the glass, which leads to corrosion.
- 🚫 Install glass without a primer, which causes the glass to fall off.
The best option is to contact a service specializing in glass (for example, a network Carglass or BelGlass). They provide a guarantee on work and materials for up to 2 years.
Can a chip or crack be repaired?
Minor damage (up to diameter 2 cm) can be repaired without replacing the glass. For this use:
- 🛠️ Polymer compositions (For example, Permatex 09103 or 3M Windshield Repair Kit).
- 🛠️ Ultraviolet lamps to harden the resin.
- 🛠️ Injectors for filling cracks (set GlassPro).
Repair technology:
- Clean the damage with alcohol and dry.
- Install the injector bridge over the chip.
- Fill the crack with polymer under pressure.
- Irradiate with a UV lamp for 5–10 minutes.
- Remove excess resin with a blade.
Service repair cost: 1,000–2,500 rub. for one damage. However, please note that:
- ❌ Cracks >30 cm long are not subject to repair.
- ❌ Damage on the edge of the glass (closer than 5 cm to the frame) it's impossible to restore - this violates the structural strength.
- ❌ After repair it may remain optical distortion (especially when driving at night).
Where to buy a windshield for Almera N16?
Verified sources for purchase:
- 🛒 Official dealers Nissan - guarantee of original glass, but high price.
- 🛒 Online stores:
- Exist.ru - a wide range of analogues.
- Autodoc.ru — convenient selection by VIN.
- Emex.ru — there are often promotions on Pilkington.
- 🛒 Showdown - you can find used glass in good condition for 3,000–5,000 rubles, but there is a risk of running into microcracks.
When purchasing online, be sure to check:
- 📌 Year of manufacture and body (sedan/hatchback).
- 📌 Availability of heating and sensors.
- 📌 Top edge tinting color (green or gray).
⚠️ Attention: On Avito and similar sites often sell glass after an accident with hidden defects. Before purchasing, ask for a photo against the light!
FAQ: Frequently asked questions about windshields Nissan Almera N16
Is it possible to install glass from Nissan Sunny N16 instead of the original one?
No, despite the external similarity, Sunny N16 different seal fastening and shape in the wiper area. The glass will either not stand up or will leak.
Which sealant is best to use for DIY replacement?
We recommend 3M 08609 (one-component, no mixing required) or SikaTack-Drive (high elasticity). From budget - ABRO WS-904, but it takes longer to dry.
How long can I drive after replacing the glass?
Minimum polymerization time of sealant - 1 hour (at +20°C). However, it gains full strength through 24 hours. During this period, avoid washing and sudden temperature changes.
Why did rainbow stains appear on the new glass?
This is a sign deliminations — triplex bundles. The culprit is either a manufacturer’s defect or a violation of installation technology (for example, the use of solvents for cleaning). Requires replacement under warranty.
Is it possible to drive with a crack in the windshield?
Technically yes, but it's dangerous:
- The crack impairs visibility (especially in bright sunshine).
- In an accident, glass may shatter without being able to withstand the impact.
- In some regions you are fined for this (Article 12.5 of the Administrative Code - “driving a faulty vehicle”).