Right rear view mirror Nissan X-Trail T31 - a part that often suffers from mechanical damage, corrosion or electronic failure (if a heated and electrically driven version is installed). Owners of this crossover are faced with the need to replace the mirror for various reasons: from a banal accident to wear and tear of the plastic fasteners after 10+ years of use. But how to choose a high-quality replacement without overpaying for the original? And is it possible to install it yourself without contacting the service?
In this article we will look at all the nuances: from articles of original and non-original mirrors to step-by-step instructions for dismantling and installation. We will pay special attention hidden problems that arise when replacing with a T31 with an electric drive - ignoring them leads to short circuits or non-functioning functions. You will also find price comparisons, tips on selecting analogues and answers to frequently asked questions that owners have when purchasing spare parts.
Original and non-original mirrors: articles and prices
The first thing the owner faces X-Trail T31 when searching for the right mirror there is confusion in the article numbers. The fact is that mirrors for this generation (2007–2013) differ not only in the presence of an electric drive, but also in the configuration of the car. For example, versions with rear view camera (optional for top trim levels) have unique fastenings and connectors.
Below are the main articles of original mirrors from Nissan, relevant for 2026:
| Mirror type | Article | Applicability | Average price, ₽ |
|---|---|---|---|
| Without electric drive (manual) | 80910-4M000 |
Basic configuration, without heating | 4 500–6 000 |
| Electrically driven and heated | 80910-4M010 |
Mid-range and top trim levels | 12 000–15 000 |
| Electrically driven, heated and chambered | 80910-4M020 |
TEKNA, complete with system Around View Monitor | 20 000–25 000 |
| Mirror cover (plastic) | 80920-4M000 |
For all types, if only the body is damaged | 2 000–3 500 |
It is important to consider that the original mirrors are from Nissan often supplied without wiring and connectors — they have to be transferred from the old mirror or purchased separately. An alternative to the original are analogues from trusted brands:
- 🔹 Febi (article
22386) - budget option with electric drive, price ~8,000 ₽. - 🔹 Hella (article
8DL 355 008-551) - high quality plastic, price ~10,000 ₽. - 🔹 Denso (article
80910-4M011) - a complete analogue of the original, price ~11,000 ₽. - 🔹 TYC (article
20-6543-00-1) - optimal price/quality ratio, ~9,500 ₽.
⚠️ Attention: When purchasing an analogue, be sure to check wiring harness length - from some manufacturers (for example, Depo) it may be 10–15 cm shorter than the original one, which will complicate installation.
How to determine which mirror is right for your X-Trail T31
A common mistake when buying is to focus only on the year of manufacture of the car. In fact, the key parameters for selecting the right mirror are X-Trail T31 the following:
- Availability of electric drive — if your mirror is adjusted with a button on the door, you need an article with an attachment
-4M010or-4M020. - Heating — check whether there is a heating element (fine mesh) on the inside of the mirror.
- Rear view camera - if there is a camera installed in the mirror (usually visible from the small lens at the bottom), only
80910-4M020. - Case color - mirrors for X-Trail T31 come in black (
BK) or body color (PR).
The most reliable way to clarify the equipment is to look Vehicle VIN code and check it through services like Nissan ETIS or Autodoc. Alternatively, you can remove the old mirror and compare its part number (it is indicated on a sticker on the inside of the case).
- Electrically driven and heated
- Electric drive only
- Manual (no electronics)
- With rear view camera
If you are not sure about your choice, pay attention to connection connector:
- 🔌 Mirrors without electronics have only mechanical fastening.
- 🔌 Mirrors with electric drive — 3-pin connector (power, ground, signal).
- 🔌 Mirrors heated — 4-pin connector (additionally plus for the heating element).
- 🔌 Mirrors with camera — 6-pin connector (additional signals for video).
Step-by-step instructions for replacing the right mirror
Replacing the mirror with Nissan X-Trail T31 does not require special skills, but there are nuances that can complicate the process. For example, if you are working with a mirror with electric drive, it is important not to damage the wiring during dismantling. Below are detailed instructions taking into account all the pitfalls.
Disconnect the negative battery terminal (required!)
Prepare a flathead screwdriver or plastic puller
If the mirror has electronics, take a photo of the connector before disconnecting it
Cover the door with a soft cloth to avoid scratching the paint -->
Removing the old mirror
1. Remove plastic cover inside the door (it is secured with latches). Carefully pry it off with a screwdriver, starting from the bottom corner.
2. Unscrew three bolts mirror mounting (under the trim). They may be under Torx T20 or Phillips screwdriver - depends on the year of manufacture.
3. If the mirror is powered, disconnect power connector. It is located behind a plastic cover on the back of the mirror. To remove the cover, gently press down on the top of the cover and slide it down.
⚠️ Attention: On some versions X-Trail T31 (2010–2013) the connector is secured with an additional latch. If you do not squeeze it out, you can damage the contacts!
Installing a new mirror
1. Connect the connector to the new mirror (if it has electronics). Make sure that the contacts match - on the original mirrors they are marked with letters (A, B, C).
2. Attach the mirror to the door by tightening the bolts. Do not overtighten them - a force of 5–6 Nm is enough, otherwise you can break the threads in the plastic base.
3. Reinstall the plastic door trim. Check that all the latches are in place - otherwise, over time, the cover will begin to creak.
4. Connect the battery and check the mirror operation:
- For versions with electric drive: the adjustment should operate smoothly, without squeaks.
- For heated versions: 1-2 minutes after switching on the mirror should warm up slightly (check with your hand).
- For versions with camera: the image must be transmitted to the screen without interference.
If after replacing the electric mirror works jerkily, most likely the problem is control unit (located in the door). Try resetting it by disconnecting the battery for 10 minutes.
Typical replacement problems and how to avoid them
Even with careful replacement, owners X-Trail T31 encounter unexpected difficulties. Let's look at the most common of them and ways to solve them.
1. The power mirror is not adjustable
Reasons:
- 🔧 Incorrect connector connection (contacts are mixed up
AAndB). - 🔧 Damage to the wiring inside the door (wires and hinges often fray).
- 🔧 Malfunction of the mirror control unit (located in the door, under the trim).
Solution: Use a multimeter to check the voltage at the connector when pressing the adjustment button. If there is voltage, but the mirror does not move, the problem is in the motor. If there is no voltage, look for a break in the wiring.
2. Heated mirror does not work
Most often this is due to:
- 🔥 Burnt out heating element (checked by a tester).
- 🔥 Oxidation of contacts in the connector (clean them with alcohol).
- 🔥 Fuse failure
F37 (10A)in the block under the steering wheel.
⚠️ Attention: On some X-Trail T31 (2011–2013) heated mirrors controlled via relay in BCM. If the fuse is intact and the heating does not work, check this relay (located under the instrument panel).
3. The camera in the mirror does not transmit the image
Problems with the rear view camera in the mirror X-Trail T31 usually comes down to three reasons:
- 📹 The video transmission cable is damaged (it often breaks on the door hinge).
- 📹 Oxidation of contacts in the camera connector (needs to be cleaned and treated with contact lubricant).
- 📹 Malfunction of the camera control unit (located behind the radio).
To diagnose, connect the camera directly to the display (if there is such a connector) - if the image appears, the problem is in the wiring or control unit.
How to check the camera without dismantling the radio?
Connect the test monitor to the camera connector (it is located behind the glove compartment if you remove the plastic cover). If there is an image, the problem is in the radio or its firmware. If not, look for a break in the wiring or a malfunction of the camera itself.
Comparison of original and non-original mirrors: what to choose?
The main question when buying is whether it’s worth overpaying for the original or can you get by with an analogue? To answer this, let’s compare the key parameters:
| Parameter | Original mirror | High-quality analogue (Hella, Denso) | Budget analogue (Febi, TYC) |
|---|---|---|---|
| Service life | 8–10 years | 5–7 years | 3–5 years |
| Plastic quality | Resistant to UV and temperature changes | Medium (may crack after 3–4 years) | Low (fades, becomes brittle) |
| Fit accuracy | Perfect (no gaps) | Good (may require tightening of bolts) | Medium (there may be gaps between the body and the door) |
| Cost | 12 000–25 000 ₽ | 8 000–11 000 ₽ | 4 000–7 000 ₽ |
| Warranty | 1–2 years (at official dealers) | 6–12 months | 3–6 months |
Our verdict:
- 💰 If your budget allows, take it original - it will last longer and will not cause problems with fit.
- 💡 To save money, choose analogues from Hella or Denso - they are almost as good as the original in quality.
- ⚠️ Budget analogues (Febi, TYC) are suitable if the mirror needs to be re-edited before selling the car or if you are prepared for possible problems with the plastic in 2-3 years.
When purchasing an analogue, be sure to check availability certificate of conformity — this is a guarantee that the part has passed crash tests and will not fly apart in an accident.
Where to buy the right mirror for X-Trail T31: verified sellers
Not only the price, but also the quality of the spare part depends on the place of purchase. We analyzed owner reviews X-Trail T31 and compiled a rating of reliable suppliers:
- 🏆 Official Nissan dealers - guarantee of originality, but prices are 20–30% higher than the market. Suitable if you need 100% compatibility.
- 🏆 Autodoc — a wide range of analogues, convenient selection by VIN. Minus: sometimes parts arrive with defects (need to be checked upon receipt).
- 🏆 Exist.ru — optimal balance of price and quality. There are originals and analogues from Hella, Denso.
- 🏆 Avito/Yula — you can find used originals in good condition for 30–50% of the price. Risk: buying a “pig in a poke” (check before paying!).
- 🏆 AliExpress - cheap analogues (from 3,000 ₽), but the quality of plastic and electronics is often poor. Suitable for temporary replacement only.
Tip: When buying a used mirror, be sure to check:
- Performance electric drive (if any).
- Integrity heating element (call the tester).
- Condition fastenings — plastic clips inside the case often break.
Frequently asked questions about the right mirror X-Trail T31
Is it possible to install a power mirror instead of a manual one?
Yes, but this will require:
- Route the wiring from the control unit in the door to the mirror.
- Install the adjustment button on the door panel (can be taken from disassembly).
- Connect power to the fuse (usually used
F20 (15A)).
Without the skills to work with auto electricians, it is better to entrust this to specialists - errors in the connection can lead to a short circuit.
Why doesn't the new heated mirror heat up?
The reasons may be as follows:
- The heating element connector is not connected (check the connection diagram).
- Fuse blown
F37(responsible for heating the mirrors). - The relay in the BCM is faulty (diagnosis with a scanner is needed).
- The wiring in the corrugation between the door and the body is damaged.
Start by checking the fuse and connectors. If the problem remains, diagnose the wiring.
How to remove the plastic door trim without breaking the latch?
Algorithm:
- Unscrew the screw under the door handle (under the decorative plug).
- Carefully pry off the trim with a plastic puller, starting from the bottom corner.
- Disconnect the clips around the perimeter (there are 6–8 pieces).
- Remove the cover by disconnecting the backlight connector (if equipped).
Do not pull the pad by force - this will lead to breakage of the clips. If the latch is broken, it can be purchased separately (item no. 80530-4M000).
Which mirror is suitable if I have an X-Trail T31 restyling (2010–2013)?
For restyled versions (after 2010), the same article numbers are suitable as for the pre-restyle version, but with two nuances:
- Mirrors with camera (
80910-4M020) may have a different connector - check with the seller. - On some versions, the fastening of the plastic door trim has changed (one clip has been added).
It is best to focus on the car's VIN or check the article number with an old mirror.
Can the mirror housing be painted to match the body color?
Yes, but there are a few rules:
- Use flexible paint (For example, Motip Flex) so that it does not crack due to vibrations.
- Before painting, degrease the plastic and apply plastic primer.
- It is better to entrust painting to professionals - in garage conditions it is difficult to achieve uniform coverage.
Cost of painting at the service: ~3,000–5,000 RUR (depending on color).