Rear wiper blade on Nissan Qashqai J11 (2013–2021) - it would seem a trifle, but its malfunction can cause a lot of inconvenience. A poorly cleaned rear window impairs visibility, especially in rain or snow, and worn tires leave streaks, scratch the surface and can even cause squeaks. Owners Kashkaya second-generation brushes are often faced with the question: how to choose an original brush, how does it differ from analogues, and is it possible to save money without losing quality?
In this article we will go over everything you need to know about the rear brush. Qashqai J11: from sizes and part numbers to step-by-step replacement instructions. You will learn which brands offer the best analogues, how to avoid common mistakes during installation, and what to do if the brush “freezes” or operates jerkily. And also - unique life hacks for extending the service life and diagnosing faults of the electric drive.
Rear brush characteristics Nissan Qashqai J11: sizes, articles, compatibility
Rear wiper on Qashqai J11 has a standard length 300 mm (some sources indicate 280–305 mm, but this is a measurement error). Important: the brush is attached to the lever using "U" type hook, and not a side clamp, as on many European cars. This is a key point when selecting analogues.
The original article number for the rear brush is from Nissan — 28550-JM00A (for 2013–2017 models) or 28550-JM01A (for restyled versions 2017–2021). The difference between them is minimal: it mainly concerns the rubber composition and the shape of the adapter. However, both brushes are interchangeable, if you do not take into account minor nuances of fit.
- 🔧 Original:
28550-JM00A/28550-JM01A(price ~1,200–1,500 rub.) - 🔄 Analogues: Bosch
3397004626, Valeo600009, DensoWI-17 - ⚠️ Incompatible: brushes with “side pin” or “push button” fastening (for example, for Toyota or VW)
Important: on restyled versions Qashqai J11 (after 2017) sometimes brushes are installed with a changed angle of bending of the lever. If your car was manufactured after 2018, check the part number using the VIN code or visually compare the mounting shape.
- Original (Nissan)
- Premium analogue (Bosch, Valeo)
- Budget analogue (for example, Finwhale)
- I don't know, I've never changed it
How to choose a brush: original vs analogues
Original brushes from Nissan are guaranteed to fit in size and fit, but their price often seems overpriced. Analogues can be 2-3 times cheaper, but not all of them are equally good. Let's look at the pros and cons of each option.
| Brush type | Benefits | Disadvantages | Service life |
|---|---|---|---|
| Original (Nissan) | Perfect fit, soft rubber, no squeaks | High price, fakes on the market | 1.5–2 years |
| Premium analogue (Bosch, Valeo) | The quality is not worse than the original, often better | The price is close to the original | 2–3 years |
| Budget analogue (Finwhale, Champion) | Low price, easy to find | Hard rubber, rapid wear, possible squeaks | 6–12 months |
If you choose analogue, pay attention to rubber composition. Cheap brushes are often made of too hard material, which scratches the glass and does not clear snow well. The best option in terms of price/quality ratio - Bosch 3397004626 or Valeo 600009. They are suitable for Qashqai J11 all years of production and have improved aerodynamics.
⚠️ Attention: When purchasing analogues, check the packaging for the presence of a hologram or protective stickers. Counterfeit brands Bosch And Valeo They are often sold with defective tires that crumble after a month.
Step-by-step instructions for replacing the rear brush
Replacing the brush with Nissan Qashqai J11 takes no more than 5 minutes and requires no tools. The main thing is to remove the old brush correctly without damaging the lever. Follow this instruction:
- Lift the lever windshield wiper in a vertical position (perpendicular to the glass). It locks in this position automatically.
- Click on the latch at the base of the brush (it is located on the side, closer to the glass). At the same time, pull the brush down to remove it from the hook.
- Compare mount new brush with old one. Make sure the adapter is the same shape.
- Install a new brush, snapping it onto the hook until it makes a characteristic click. The lever should move up and down freely.
- Lower the lever on the glass and check the operation of the windshield wiper in different modes.
The new brush sits tightly on the hook|The lever does not dangle or jam|There are no squeaks or knocks during operation|The brush completely cleans the glass without streaks-->
If after replacement the brush is jerky or does not adhere to the glass, the problem may be curved lever or worn drive. In this case, diagnostics of the mechanism will be required.
What to do if the brush does not come off?
If the latch does not press or the brush is “stuck” to the lever, do not apply force - this could break the fastener. Treat the joint with WD-40 or silicone lubricant, wait 5-10 minutes and try again. If this does not help, carefully pry off the brush with a flat-head screwdriver, after wrapping it in a cloth so as not to scratch the glass.
Typical problems and their solutions
Even a new brush may not work correctly if there are problems with the mechanism or electrics. Here are the most common malfunctions and how to fix them:
- 🔊 Creak when working: Usually caused by dry rubber or glass contamination. Treat the brush with silicone lubricant (do not use WD-40!). If the squeak remains, replace the brush.
- 🌀 The brush “hangs” in one position: Check the drive power supply (fuse
F37 (10A)in the cabin block). The motor could also burn out and will need to be replaced. - 💧 Doesn't clear water or snow well: if the brush is new, the problem is worn glass (microcracks) or incorrect angle of inclination of the lever. Try adjusting the lever by loosening the fastening nut.
- ⚡ Doesn't work at all: Check the wiper relay (
R17in the block under the hood) and the connector on the motor. Contacts often oxidize.
⚠️ Attention: If the rear windshield wiper stops working after washing, water most likely got into the motor connector. Dry it with a hairdryer (not hot air!) or treat the contacts LIQUI MOLY Kontakt-Spray.
On Qashqai J11 with the system Around View Monitor (surround view cameras) a faulty windshield wiper may block the operation of the rear camera. If the media screen shows an error after replacing the brush, reset the camera settings through the menu Settings → Camera → Reset.
Caring for and extending the service life of the brush
The average service life of a rear brush is 1–2 years, but with proper care this period can be extended to 3–4 years. Here are some proven tips:
- 🧼 Wash your brush once a month with warm water and soap to remove dirt and wax residue from the glass. Do not use aggressive detergents!
- 🧴 Lubricate the rubber silicone grease (for example, Gummi-Pflege from LIQUI MOLY). This prevents cracking and squeaking.
- ❄️ in winter Before turning on the windshield wiper, remove ice from the glass manually. Working on dry glass shortens the life of the brush by 2–3 times.
- 🅿️ When parking Raise the lever vertically if snow or ice is expected. This will reduce the load on the mechanism spring.
If the brush begins to “smudge” the glass, try cleaning it with fine-grained sandpaper (1000–1500 grit). Gently walk along the rubber edge, then rinse with water. This will temporarily restore cleansing properties.
Avoid using car shampoos with wax — they leave a film on the glass, which makes the brush less effective at cleaning the surface. To wash the rear window, it is better to use special cleaners, for example, Sonax Glass Cleaner.
When you need to replace not only the brush, but also the mechanism
If after replacing the brush the problems remain (jerking, incomplete range of motion, extraneous sounds), the problem may be drive wear or lever. On Qashqai J11 Most often they fail:
- 🔩 Wiper motor (article
28550-JM00B). Symptoms: does not work at all or moves jerkily. - 🔗 Drive traction (article
28550-4M000). Symptoms: the brush “sticks” in one position. - 🔄 Wiper arm (article
28550-JM00C). Symptoms: play, loose fit to the glass.
Replacing the motor or linkage requires removing the inner trim of the trunk door. This is a more complex procedure than replacing a brush and takes about 1–1.5 hours. If you are not confident in your abilities, it is better to contact the service. The average cost of replacing a motor is 1,500–2,000 rubles.
⚠️ Attention: When replacing the windshield wiper motor with Qashqai J11 with the system Around View Monitor Camera calibration will be required! Without this, the surround view function will not work correctly. Calibration can only be done using a diagnostic scanner (e.g. Nissan Consult).
Where to buy and how much it costs
Rear brush prices for Nissan Qashqai J11 vary depending on brand and place of purchase. Here are the current proposals for 2026:
| Brand / Article | Price (RUB) | Where to buy | Notes |
|---|---|---|---|
Nissan 28550-JM00A |
1 200–1 500 | Official dealers, Exist.ru | 1 year warranty, original packaging |
Bosch 3397004626 |
800–1 100 | Autodoc, Ozon, Wildberries | The best analogue in quality |
Valeo 600009 |
700–950 | Koleso.ru, AutoPro | Soft rubber, long service life |
Finwhale FW300 |
300–500 | Any auto shop AliExpress | Budget option, wears out quickly |
When buying online, pay attention to reviews about the seller - they often sell fakes under the guise of branded brushes. Original spare parts Nissan must have a hologram on the packaging and a certificate of conformity.
Don't skimp on the rear brush! Cheap analogues can scratch the glass, which will lead to expensive polishing or glass replacement (from RUB 15,000 per Qashqai J11).
FAQ: Frequently asked questions about the rear brush Nissan Qashqai J11
Is it possible to install a brush longer than 300 mm for better cleaning?
No, this will lead to overload of the motor and premature wear of the mechanism. The maximum permissible length is 305 mm, but even in this case the brush can cling to the door seal.
Why does a new brush leave streaks?
The reasons may be different: greasy glass (wash it with alcohol) poor quality tires (replace the brush with a branded one), or worn glass (requires polishing).
How to remove the windshield wiper arm for replacement?
The lever is attached to the motor shaft with a nut on 10 mm. Unscrew it, remove the lever (you may have to pry it off with a screwdriver) and install a new one. Do not use excessive force - the aluminum shaft may be damaged!
Is it possible to turn off the rear windshield wiper if it is in the way?
Technically yes - you can remove the fuse F37 (10A) or disconnect the motor connector. However, this violates the maintenance rules (the windshield wiper must be in good working order). In addition, during maintenance this may cause a failure.
What is the difference between brushes for dorestyle and restyle Qashqai J11?
Formally, they are interchangeable, but on restyled versions (after 2017) brushes with a slightly changed mounting angle are sometimes installed. If your car is 2018+, it is better to take the article 28550-JM01A.