Hatchback rear door Nissan Note first generation (body E11) has a specific windshield wiper design, which often raises questions among owners. Unlike many sedans, it uses a short brush with a special attachment that can become loose or break over time. Ignoring problems with the rear wiper not only leads to poor visibility in the rain, but also damage to the door's paintwork due to vibration.
Many car owners try to install standard brushes from other cars, which leads to rapid wear of the mechanism or the inability to operate correctly. Proper selection, understanding the design of the hinge joint and regular maintenance are the keys to a long-lasting windshield wiper system. In this article we will analyze all the nuances of choosing, replacing and repairing a rear wiper specifically for the body E11.
Design features of the rear windshield wiper Nissan Note E11
Rear window cleaning system Nissan Note The first generation has its own unique characteristics that distinguish it from later models. The main element is a lever (trapezium), which is driven by an electric motor hidden under the door trim. The arm design is designed to provide a maximum cleaning angle despite the compact dimensions of the glass.
The key feature is the type of attachment of the brush itself. It uses a specific clamp, which differs from the usual hook or side latches. Original length The brush width is 14 inches (360 mm), which is a critical parameter. Installing longer tires will cause the wiper to rest against the pillar or trunk lid, causing the motor to overload.
The fastening mechanism often suffers from corrosion, especially in winter, when reagents penetrate into the gaps. This leads to jamming of the hinges or their play. If you notice that the wiper operates jerkily or leaves unwashed areas, the problem may not be in the rubber, but in the lever itself or its seat.
- 🔍 A specific type of fastening that requires precise selection of analogues.
- ⚙️ Compact brush length 360 mm to prevent impacts on the body.
- 🛡️ Sensitivity of the mechanism to corrosion due to its proximity to the ground.
Selection of original and analog wipers
When looking for a replacement for your Nissan Note It is important to understand the difference between original parts and high-quality analogues. The original part number for the rear wiper often changes depending on the year and market, but the basic dimensions remain the same. Usage original spare parts guarantees a perfect fit of the rubber to the curved glass.
However, the market offers many worthy alternatives. Brands that specialize in windshield wipers often produce adapters for mounting Nissan. When choosing an analogue, pay attention to the quality of the rubber band and the presence of silicone impregnation, which prevents tanning in the cold. Frameless models may fit, but require careful checking of mounting compatibility, since the standard lever has a curved shape.
The most common misconception is buying universal brushes “for any car.” For E11 this often ends with the brush not clicking into place or falling off during the first wash. Always check that the adapters are included. The length of 360 mm is a strict requirement for the correct operation of the Nissan Note E11 mechanism.
- ✅ Original kits with factory mounting and quality guarantee.
- 💰 Budget analogues from proven brands (Bosch, Valeo, Denso).
- 🚫 Universal brushes that do not fit the shape of the attachment.
- Original
- Frameless analogues
- Frame analogues
- Silicone special models
⚠️ Warning: Do not attempt to lengthen or shorten the rubber band yourself without the appropriate tool. This will upset the pressure balance and cause streaks on the glass.
Step-by-step instructions for replacing the rear wiper
Replacing the rear wiper with Nissan Note - a procedure that can be performed independently in 10-15 minutes. The main rule: work carefully so as not to scratch the glass or paint of the door. Before starting work, be sure to turn off the ignitionso that the motor does not start accidentally when you remove the lever.
The process begins by raising the wiper lever to the vertical position until it stops. You will see a lock that you need to press and at the same time pull the brush down from the glass. Sometimes a little wiggle is required to release the clamp. If the mechanism is rusty, use a penetrating lubricant and give it time to work.
Installing a new brush is done in the reverse order. Place the fastener onto the lever pin and make sure it snaps into place. After this, lower the wiper onto the glass. Check operation by turning on the washer and cleaning mode. The movement should be smooth, without jerks or extraneous sounds.
☑️ Preparation for replacement
⚠️ Caution: If you feel strong resistance when removing, do not use excessive force. Most likely, the mechanism is jammed by corrosion, and pre-treatment with WD-40 or an equivalent is required.
What to do if the wiper is not removable?
Sometimes the latch gets stuck. Try lifting the latch slightly with a soft-tip screwdriver while pulling on the brush. Do not use sharp objects to avoid damaging the plastic of the mount.
Elimination of squeaks and vibrations
The squeaking of the rear wiper is a common problem that irritates the driver and indicates that the system is not working properly. Most often, the reason lies in contamination of the rubber band or the glass itself. Dirt and grease film create resistance on the glass, causing the rubber to “jump” across the surface.
To fix the problem, first thoroughly wash the glass and the rubber of the brush itself with special products. If the squeak persists, check the lever angle. On Nissan Note E11 Due to vibrations, the attachment point may move, changing the angle of attack. This requires adjusting the position of the wiper blade relative to the glass.
Vibration can also be caused by worn bushings on the lever or weakening of the spring that presses the blade to the glass. In this case, simply replacing the tires will not help. It is necessary to check the integrity of the spring mechanism and, if necessary, replace the entire lever assembly.
- 🧼 Regular cleaning of glass from bitumen stains and grease film.
- 🔧 Checking the angle of installation of the lever and the absence of play in the mount.
- 🌡️ Using winter brushes with a protective cover during the cold season.
Before installing new brushes, wipe the rubber band with an alcohol wipe. This will remove the factory protective grease, which often causes the first squeak during operation.
Compatibility table and brush sizes
To avoid mistakes when purchasing, check the table below. The dimensions of the rear wipers may vary slightly depending on the year of manufacture and configuration, but the main parameters for the body E11 remain stable. Ignoring this data may result in the brush hitting the body or not cleaning the glass.
| Parameter | Meaning | Comment |
|---|---|---|
| Mounting type | Nissan specific clamp | Often requires an adapter |
| Brush length | 14 inches (360 mm) | Critical for E11 |
| Original article | 27600-CD00A (example) | Check relevance by VIN |
| Construction type | Frame / Hybrid | Frameless fit with adapter |
When ordering spare parts through online stores, always indicate the VIN code of your vehicle. This is the only way to guarantee that you will receive a part that will fit exactly your Nissan Note. Different markets (Europe, Japan, USA) may have slight differences in the design of the rear door.
Exact adherence to the length of 360 mm and the use of the correct type of fastening is the key to the absence of vibrations and damage to the body when the wiper is operating.
Maintenance and service life extension
The durability of the rear wiper depends not only on the quality of the brush itself, but also on operating conditions. In winter, it is extremely important to clear the glass of ice and snow before turning on the wiper. Trying to scrape off ice with rubber will cause rapid wear on the edges and possible tearing of the tape.
Regularly checking the condition of the lever and lubricating the hinges will prevent the mechanism from jamming. Use special silicone lubricants that are not washed out by water and do not attract dust. It is also recommended to check the condition of the spring that provides the clamping force.
If you notice that the brush begins to leave streaks even after cleaning, it means that the rubber has lost its properties. This is a natural aging process, especially when exposed to ultraviolet radiation and temperature changes. Do not wait until the brush is completely destroyed - change it in a timely manner to avoid problems with visibility.
⚠️ Attention: In winter, always raise the brushes to a vertical position before long-term parking in the cold. This will prevent the rubber from freezing to the glass and subsequent rupture when trying to turn it on.
Frequently asked questions and answers (FAQ)
What is the original rear wiper number for Nissan Note E11?
The original number may vary depending on the year and region (for example, 27600-CD00A or 27600-AX00A). It is best to check the article number using the vehicle’s VIN code from an authorized dealer or in verified spare parts catalogues.
Is it possible to install a frameless wiper on a Nissan Note E11?
Yes, you can, but only when using a special adapter that comes with some brands of frameless brushes. Without an adapter, the standard lever mount will not allow you to securely fix the frameless structure.
Why does the rear wiper squeak on dry glass?
A squeak on dry glass is usually caused by contamination of the rubber or the glass itself, or by an incorrect angle of installation of the lever. It may also be a sign that the rubber has dried out and lost its elasticity. Try cleaning the glass and rubber, and replace the brush if necessary.
How often should you replace the rear wiper on a Nissan Note?
It is recommended to change the brush every 6-12 months, depending on operating conditions. In winter, wear occurs faster. If you notice a deterioration in the quality of cleaning, the appearance of streaks or squeaks, replacement is necessary immediately, without waiting for the planned date.