Rear bumper <em>Nissan Terrano</em>: a complete guide to selection, repair and replacement

Nissan Terrano - one of the most popular crossovers on the Russian market, especially in bodies R51 (2014–2020) and R20 (for the European market). The rear bumper of this car not only performs a protective function, but also shapes the appearance of the car. However, due to active use, parking and minor accidents, it often requires repairs or complete replacement.

In this article we will look at everything you need to know about the rear bumper. Terrano: from choosing between the original and analogues to step-by-step instructions for dismantling and installation. We will also tell you how to choose the right color when painting, which fasteners most often break, and how to avoid mistakes when doing your own repairs. If you encounter a crack, scratch or need tuning, you will find answers to all your questions here.

Original vs analogues: what to choose for the rear bumper Nissan Terrano?

The first question that arises when replacing a bumper is whether to buy original part from Nissan or turn to analogues. Original bumpers are made from high quality plastic (usually polypropylene or ABS plastic), have a perfect fit and match the body color exactly. However, their price can reach 20–30 thousand rubles (depending on generation and configuration).

Alternative options from type manufacturers Febi, Hella or Dello will cost 2-3 times cheaper, but here it is important to consider:

• 🔍 Plastic quality - cheap analogues can crack at low temperatures or lose shape over time.
• 🎨 Color Matching — even if the bumper is painted, the shade may differ from the original.
• 🔧 Equipment — the original often comes with all the fasteners and seals, while analogues may not have them.
• 📏 Fit accuracy — non-original bumpers sometimes require local modifications.

If your budget is limited, you can consider bumpers from trusted brands, for example, TWR or Auto7. They offer a good balance of price and quality. For Terrano R51 (restyling 2017) bumpers with article numbers are suitable 62210-4M000 (original) or TWR-62210-NIS01 (analog).

When is replacement necessary, and when is repair sufficient?

Not every crack or scratch requires a complete bumper replacement. Here are the criteria to help you make a decision:

Type of damage	Can it be repaired?	Repair cost (approx.)	Recommendation
Minor scratches (no deeper than the varnish)	Yes (polishing)	1 000–3 000 ₽	Repair
Cracks up to 10 cm without deformation	Yes (plastic welding + putty)	3 000–6 000 ₽	Repair
Deep cracks with faults	Partially (reinforcing mesh is needed)	5 000–10 000 ₽	Depends on scale
Severe dents or broken fasteners	No (plastic loses strength)	—	Replacement
Damage affecting the amplifier	No (requires amplifier replacement)	—	Replacement bumper + amplifier

If the bumper is cracked but has not lost its shape, it can be restored using welding plastic (use a special extruder or soldering iron with solder for polypropylene). For Terrano with bumper from ABS plastic The method of gluing with epoxy resin with a reinforcing mesh is suitable. However, after such repairs, the part will still be vulnerable to repeated impacts.

⚠️ Attention: If the crack passes through the place where the bumper is attached to the body (for example, near the bolts to the side member), repair is impractical - with the next impact the bumper may fall off completely.

Step-by-step instructions: how to remove the rear bumper on Nissan Terrano?

To dismantle the bumper you will need:

• 🔧 Set of sockets and keys (10, 12, 14 mm).
• 🔨 Flat screwdriver or plastic clip remover.
• 🔦 Flashlight (for illuminating the mounts below).
• 🧤 Gloves (so as not to scratch the body).

The removal process takes about 1–1.5 hours. The main thing is to take your time and carefully remove the clips so as not to break them.

Disconnect the negative terminal of the battery (if you are working with wiring)

Put the car on the handbrake and put chocks under the wheels

Clean the bumper and mounting points from dirt

Prepare a container for bolts and clips (so as not to lose them) -->

Step 1. Removing the lower protection (if equipped).

If on your Terrano There is a plastic protection installed under the bumper, remove it first. It is attached to 4–6 screws and plastic pistons. Carefully pry the pistons with a screwdriver and unscrew the screws.

Step 2. Unscrewing the mounting bolts.

Bumper Terrano R51 attaches to:

• 2 bolts from below (under protection, 12 mm head);
• 2 bolts on the sides (in the wheel arches, 10 mm head);
• 4 pistons on top (under the trunk lid).

Start unscrewing from the bottom bolts, then move on to the side ones. Remove the pistons on top last, as they keep the bumper suspended.

Step 3: Disconnect the wiring.

If installed on the bumper fog lights or parking sensor, disconnect their connectors. On Terrano with a rear view camera, you will also have to disconnect its cable (the connector is usually located on the right side of the bumper).

⚠️ Attention: Do not pull on the wires - Terrano with the system Around View Monitor The cables go through the bumper amplifier, and their breakage can damage the entire all-round visibility system.

Step 4. Removing the bumper.

After unscrewing all the fasteners, carefully pull the bumper towards you, starting from one of the corners. If it doesn't budge, check to see if there are any unnoticed clips or bolts. On Terrano With parking sensors, sometimes you have to move the bumper a little to the side to free the connectors.

Installing a new bumper: nuances and mistakes

Installing a new bumper on Nissan Terrano It seems simple, but there are several critical points here:

1. Checking the contents.

The box with the new bumper should contain:

• 📋 The bumper itself (with holes for PTF and sensors, if any);
• 🔩 Fastening bolts and nuts (sometimes come in a separate bag);
• 🔄 Sealing rubber gaskets (for tightness);
• 🔌 Clips (if the old ones broke when removed).

If something is missing, do not start the installation - purchase the missing elements in advance.

2. Fit in place.

Even original bumpers sometimes require a little modification. Check:

• The gaps between the bumper and the fenders (should be the same on both sides).
• Fit to the body - if there are gaps, you may need to tighten the fasteners or add gaskets.
• Alignment of holes for PTF and sensors (drill them out if necessary).

3. Fastening the wiring.

When connecting fog lights or parking sensors, pay attention to the polarity. On Terrano with the system ProPILOT Incorrect connection of sensors can cause an error in the control unit. If after installation it lights up Check Parking System, check the connectors.

⚠️ Attention: On models Terrano 2018+ with 360° camera may need to be replaced after bumper replacement system calibration via a diagnostic scanner (for example, Launch X431). Without this, the camera will show a distorted image.

4. Final check.

After installation:

• Check the operation of all lights and sensors.
• Make sure that the bumper is not loose (shake it with your hands).
• Start the car and put the car in reverse gear - the parking sensors should work.

Painting a bumper: how to achieve the perfect color?

If you paint the bumper yourself or order this service, the main task is to choose a color identical to the body. On Nissan Terrano The following primary colors are used:

• 🔴 KH3 — Red "Cupid"
• ⚫ KAD — Black "Onyx"
• 🔵 KAC — Blue "Azure"
• ⚪ QAB — White "Pearl"
• 🟤 GAY — Gray "Graphite"

The color code is located on a plate under the hood (usually next to the VIN). However, even with the correct code, the shade may differ due to:

• Faded paint on the body (especially on cars older than 3 years);
• Different batches of paint from the manufacturer;
• Improper surface preparation before painting.

To avoid color difference:

1. Order computer paint selection by VIN or color code at a trusted car service center.
2. Ask to do test paint on a small area of the bumper.
3. Use varnish coating from the same manufacturer as the paint.
4. If you paint yourself, apply the paint in 2-3 layers with intermediate drying.

For bumpers Terrano painting technology is often used with transition - when paint is applied with shading to adjacent parts (for example, to part of a wing). This helps hide possible differences in shades.

How to check the quality of paint after repair?

After painting, inspect the bumper in a bright light from different angles. A high-quality coating should be:

- Smooth to the touch (without shagreen);

- Without smudges and bubbles;

- The same shade as the body in any lighting.

If defects are noticeable, ask for rework - after 1–2 months they will become even more noticeable.

Rear bumper tuning: what can be done?

Rear bumper Nissan Terrano - an excellent platform for tuning. Here are some popular modifications:

1. Installation of the diffuser.

The diffuser not only improves the appearance, but also slightly optimizes the aerodynamics. For Terrano R51 Diffusers from TWR or EvoCorse. The average cost is 8,000–15,000 rubles. Please note that trimming of the bumper may be required for installation.

2. LED lighting.

You can install:

• 🔆 Additional brake lights (mortise or stickers);
• 💡 License plate illumination (LED strip);
• 🚨 Fog lights with angel eyes.

Important: any changes in lighting must comply with GOST. For example, additional brake lights should be red and turn on synchronously with the main ones.

3. Protective pads.

For off-road use you can install:

• 🛡️ Metal protection (from Ironman 4x4 or ARB);
• 🪨 Plastic "scales" (protects against chipping when driving on gravel);
• 🔗 Kenguryatnik (but it requires certification for legal use).

4. Vinyl stickers.

If you don't want to paint the bumper, you can use vinyl film. Popular options:

• 🖤 Matte black;
• 🔥 Carbon (imitation);
• 🌈 Chameleon (changes color depending on the viewing angle).

The cost of bumper wrapping is from RUB 5,000. The main plus: the vinyl protects against minor scratches and is easy to remove.

Common problems with the rear bumper Nissan Terrano and how to avoid them

Owners Terrano often encounter typical problems associated with the rear bumper. Here are the most common:

1. Blade of fastenings.

The plastic clips that secure the bumper to the body become loose or break over time. To avoid this:

• When removing the bumper, use plastic puller, not a screwdriver.
• Check the condition of the clips periodically and replace them if worn.
• When installing a new bumper, use metal rivets instead of plastic ones (if the design allows it).

2. Corrosion of mounting bolts.

The bolts at the bottom of the bumper often rust due to water and salt ingress. To prevent this:

• Treat the bolts anti-corrosion lubricant (For example, WD-40 or Liqui Moly).
• When replacing the bumper, use galvanized bolts.
• Wash the bottom of the bumper regularly, especially in winter.

3. Problems with parking sensors.

On Terrano with the system Intelligent Parking Assist sensors may fail due to:

• Water getting into the connectors;
• Mechanical damage when washing under high pressure;
• Oxidation of contacts.

If the sensor doesn't work, try:

1. Clean its surface from dirt.
2. Check the integrity of the wiring.
3. Reset the error using the diagnostic scanner.

4. Cracks from low temperatures.

Bumper plastic Terrano may become brittle at temperatures below –20°C. To avoid cracks:

• Don't park close to curbs in winter.
• Use soft bumper pads for protection.
• When washing in winter, allow the bumper to cool before leaving (sharp temperature changes are harmful to plastic).

FAQ: answers to frequently asked questions about the rear bumper Nissan Terrano

Is it possible to drive without a rear bumper?

Technically yes, but it violates Traffic regulations (clause 7.18), since the bumper is a part of the body that ensures safety. In addition, without a bumper, the headlight mounts and wiring are exposed, which can lead to a short circuit. The traffic police can issue a fine of 500 rubles for “a malfunction for which operation is prohibited.”

What is the best adhesive for repairing cracks on a Terrano bumper?

For Nissan Terrano with bumper from polypropylene suitable:

• 3M Scotch-Weld DP8005 (two-component adhesive for plastic);
• Loctite Plastics Bonding System (with activator for complex plastics);
• Welding plastic using solder PP (polypropylene).

For ABS plastic You can use epoxy resin with reinforcing mesh.

How much does it cost to replace the rear bumper on a Terrano at a service center?

The cost depends on the type of bumper and region:

• Original bumper + painting + installation — 25 000–40 000 ₽;
• Analogue + painting + installation — 12 000–20 000 ₽;
• Installation only (if the bumper has already been purchased and painted) — 3 000–6 000 ₽.

In Moscow and St. Petersburg, prices are 10–15% higher than in the regions.

Is it possible to install a bumper from a Nissan X-Trail on a Terrano?

No, bumpers Terrano R51 And X-Trail T32 (even the same year of manufacture) are not interchangeable. They have different:

• Shape and dimensions;
• Fastenings to the body;
• Location of holes for PTF and sensors.

The exception is some tuning bumpers that fit both models, but they need to be adjusted.

What should I do if the parking sensors do not work after replacing the bumper?

The problem may be:

1. Incorrect connection — check the connectors and polarity.
2. Damaged wiring — inspect the cables for breaks.
3. Calibration Needs - on Terrano with Around View Monitor After replacing the bumper, a reset via the diagnostic scanner is required.

If the sensors still do not work, they may be faulty (check them with a tester).