Rear bumper Nissan Terrano 3 - This is not just an element of the exterior, but a key component of the safety and functionality of the car. It protects the body from mechanical damage, absorbs energy during impacts and affects aerodynamics. However, over time, even the most durable bumper can crack, become deformed, or lose its appearance due to an accident, parking, or normal wear and tear.

In this article we will look at everything the owner needs to know. Terrano 3 (2014–2020) about the rear bumper: from choosing between the original and analogues to step-by-step instructions for replacement. You will learn what materials are used in production, how to avoid mistakes when purchasing and what nuances to consider when painting. And if you need to save money, we will tell you how to repair the bumper yourself without losing strength.

Original bumper vs analogues: what to choose for Nissan Terrano 3

The first question that arises when replacing a rear bumper is whether to buy an original part from Nissan or stop at a non-original analogue. Original bumper (article no. 62010-4M000 for the version without parking sensors) guarantees a perfect fit, an exact match with the fasteners and factory quality plastic. However, its price can reach 20–25 thousand rubles, which is not always justified for a used car.

Alternatives fall into three categories:

  • 🔹 OEM analogues (for example, from Dongfeng or Renaultwith whom Terrano 3 divides the platform) - 30-40% cheaper, but may differ in the thickness of the plastic.
  • 🔹 Non-original bumpers (brands Febi, Hella, AMS>) - budget up to 12 thousand rubles, but require adjustment.
  • 🔹 Used originals - a risky option (there may be hidden repairs), but the price starts from 8 thousand rubles.

If you choose analogue, pay attention to material: the original is made of polypropylene (PP) with additives for impact resistance, and cheap copies are often made from ABS plastic, which cracks at low temperatures. Check also availability reinforcing beam (article 62020-4M000) — without it, the bumper will not withstand even a light blow.

📊 Which bumper do you prefer for Terrano 3?
  • Original Nissan (expensive but reliable)
  • OEM equivalent (Dongfeng/Renault)
  • Unoriginal (Febi, Hella)
  • Used original (economy option)

Article numbers and compatibility: how not to make a mistake when purchasing

Rear bumpers for Nissan Terrano 3 vary depending on the year of manufacture, configuration and availability of additional options. Main articles:

Modification Bumper part number Article number of the reinforcing beam Notes
Without parking sensors (2014–2017) 62010-4M000 62020-4M000 Suitable for basic versions
With parking sensors (2017–2020) 62010-4M010 62020-4M000 The holes for the sensors are already cut
For versions with rear view camera 62010-4M020 62020-4M000 Additional camera mount
Restyling (2018–2020, diffuser changed) 62010-4M030 62020-4M001 The shape of the bottom has changed

⚠️ Attention: Bumpers from Renault Duster (even with the same platform B0) do not fit - they differ in the attachments to the side members and the shape of the side edges. Also check VIN code car: for the Russian and European markets different part numbers may be used (for example, 62010-4M000 vs 62010-4M0A0 for export versions).

When purchasing a used bumper, be sure to check:

  • 🔧 Attachments to side members - must match in diameter and location.
  • 🔧 Holes for lights — on restyled models they are shifted 10 mm to the left.
  • 🔧 Plastic color — the original has a matte tint, cheap analogues are often glossy.
💡

If you buy a bumper from a disassembly site, ask the seller to remove it from the car and send a photo of the mounts. Often the photographs do not show that the bolt holes are widened or cut off.

Step-by-step instructions: how to remove the rear bumper on Nissan Terrano 3

Replacing a bumper is a task of average complexity that can be completed independently in 1–2 hours. You will need:

  • 🔧 Socket wrench on 10 mm And 12 mm.
  • 🔧 Screwdriver with Phillips bit PH2.
  • 🔧 Plastic clips (item no. 77010-4M000, ~10 pcs.) - they break when removed.
  • 🔧 Hairdryer or hot air burner (to remove sealant).

Sequence of actions:

  1. Open the trunk and remove the plastic sill trim (held on by 4 clips).
  2. Disconnect the wiring harness from the rear lights (white connector).
  3. Unscrew the bolts securing the bumper to the side members (2 bolts on each side, 12 mm).
  4. Remove the clips from the bottom of the bumper (there are 6 of them - 3 on the right and 3 on the left).
  5. Gently pull the bumper towards you, starting from the corner. If it does not give in, heat the sealant with a hairdryer.

Disconnect the battery (if you are working with parking sensors)|Take a photo of the location of the clips|Place cardboard under the bumper when removing (so as not to scratch the paint)|Mark the left/right mount with a marker (they may differ)-->

⚠️ Attention: On models with parking sensors, before removing the bumper, be sure to disconnect the control unit connector (located under the trunk trim on the left). If you leave it connected, an error may occur C1A10 (sensor malfunction), which will then have to be reset through the diagnostic scanner.

If the bumper is stuck to the body (a common problem after winter), use penetrating lubricant (For example, WD-40) on the fastenings. Do not try to remove the bolts by force - this will lead to stripping of the threads in the spar.

Rear bumper repair: when can it be restored and when can it only be replaced?

Not every damaged bumper requires replacement. If the cracks do not affect the fastenings or the reinforcing beam, it can be repaired. Basic methods:

Type of damage Repair method Cost (on your own) Service life after repair
Cracks up to 10 cm Plastic welding + fiberglass reinforcement 500–1,500 rub. 2–3 years
Dents without breaks Hair dryer + vacuum suction cup 300–800 rub. 1–2 years
Broken fragments Bonding 3M Scotch-Weld + putty 800–2,000 rub. 1 year (with careful use)
Damage to fastenings Installation of metal inserts + epoxy 1,500–3,000 rub. 3+ years

For welding plastic use construction hair dryer (temperature 300–400°C) and filler rod made of polypropylene (for example, from BOSCH). Never weld a bumper with a soldering iron - this leads to local overheating and further cracking. After welding, be sure to reinforce the seam with fiberglass and epoxy resin (for example, Fiberfix).

If the bumper has lost color or is covered with a “web” of small cracks, it can be restored liquid rubber (For example, Plasti Dip). This will cost 2–3 thousand rubles and will extend the life of the part by 1–2 seasons. However, remember: after applying liquid rubber, the bumper cannot be painted using traditional methods - complete removal of the coating will be required.

What happens if you don’t reinforce the seam after welding?

Without fiberglass reinforcement, the repaired crack will open at the first serious impact or frost. The plastic at the welding site becomes brittle, and even a slight load (for example, running into a curb) will lead to repeated breaking.

Painting a bumper: technology and common mistakes

Rear bumper painting Terrano 3 requires a special approach due to the type of plastic (polypropylene). Regular car paint will not stick to it without pre-treatment. Step by step process:

  1. Degreasing - use Anti-Silicone (not acetone!).
  2. Application of adhesive primer (For example, PPG DP40 or 3M Plastic & Paint Prep).
  3. Putty (if there are irregularities) - only elastic putty for plastic (For example, Novol Plastic).
  4. Primer (2–3 layers 2K soil).
  5. Painting (base enamel + varnish in 2 layers).

⚠️ Attention: If you skip the step with the adhesive primer, the paint will begin to peel off after 2-3 months. Also avoid painting at temperatures below +15°C - this leads to a matte finish.

Common mistakes:

  • 🔸 Using regular putty (it cracks when vibrating).
  • 🔸 Painting without removing the bumper (hard-to-reach places will remain untreated).
  • 🔸 Drying in direct sunlight (leads to bubbling of the varnish).

The cost of professional painting in the service ranges from 8 to 15 thousand rubles (depending on the complexity). If you paint it yourself, the budget will be 3–5 thousand rubles (including materials). To select an exact color, use your paint code. Terrano 3 (indicated on a plate in the trunk, for example, KAD for "Metallic Grey").

Reinforcing the bumper: how to protect against repeated damage

If you often drive off-road or park in tight yards, a standard bumper Terrano 3 may not withstand the load. You can strengthen it in several ways:

  • 🛡️ Installation of metal protection (article 62030-4M000) - attached to a reinforcing beam, cost ~5 thousand rubles.
  • 🛡️ Armor film sticker (For example, 3M Scotchgard) - protects against scratches, but not against impacts.
  • 🛡️ Additional stiffening ribs — welded from an aluminum profile and attached to the inside of the bumper.

For complete protection when driving off-road, it is recommended to install kenguryatnik (for example, from Ironman 4x4 or ARB). However, please note that this will require modifications to the mounts and may affect the operation of the parking sensors. Alternative - plastic linings (article 62040-4M000), which are attached to self-tapping screws and protect the lower edge of the bumper.

If you are installing metal protection, be sure to treat it anticorrosive (For example, Dinitrol 4941) - otherwise it will rust in a year. Also check if the protection is blocking holes for towing eyes (on Terrano 3 they are located on the left under the bumper).

💡

Reinforcing the bumper with metal increases the weight of the front axle by 10–15 kg, which can affect the life of the shock absorbers. If you do not drive on serious off-road conditions, armored film or plastic pads are enough.

Where to buy a rear bumper for Nissan Terrano 3: verified suppliers

Bumper prices and availability vary greatly by region. Here's where to look:

Source Average price (RUB) Pros Cons
Official dealer Nissan 20 000–25 000 1 year warranty, original part Long wait (2–4 weeks)
Online stores (Exist.ru, Autodoc) 12 000–18 000 Fast delivery, wide range Risk of running into a fake
Showdown (Bamper.by, Avito) 6 000–12 000 Low price, original No warranty, hidden defects possible
Local service stations (painting + installation) 8,000–15,000 (used) Can be customized by color The price is often too high

When purchasing online, be sure to check:

  • 📌 Photo of real product (not a catalog).
  • 📌 Availability of certificate (for original parts).
  • 📌 Reviews about the seller (especially on Avito or Drom.ru).

If you are buying a used bumper, ask the seller to send a video of him removing the part from the car. This will help you avoid buying a refurbished or painted bumper (often such parts are sold as “original in good condition”).

FAQ: Frequently asked questions about the rear bumper Nissan Terrano 3

Is it possible to drive without a rear bumper?

Technically yes, but it violates Traffic regulations (clause 7.18), since the bumper is part of the body. In addition, without a bumper they are unprotected tail lights And fuel tank (on Terrano 3 it is located immediately behind the bumper). Penalty for missing bumper - 500 rub. (Article 12.5 of the Administrative Code), but in case of an accident this can be recognized as a “malfunction threatening safety.”

What glue is best for repairing cracks?

For polypropylene (bumper material Terrano 3) fit:

  • 🔹 3M Scotch-Weld DP8005 (two-component, strength 20 MPa).
  • 🔹 Loctite 4090 (quick-drying, but requires degreasing Loctite 7063).
  • 🔹 Wurth Poly-Flex (elastic, suitable for dynamic loads).

Do not use superglue (For example, Moment) - it becomes brittle at low temperatures.

What to do if after painting the bumper becomes dull?

Reasons for dullness:

  1. Low drying temperature (less than +15°C).
  2. Insufficient amount of hardener in the varnish.
  3. Ingress of dust or moisture during painting.

Solution: Polish the bumper abrasive paste (For example, 3M 05974) followed by application of protective wax. If the dullness remains, you will have to repaint it.

Will the bumper from Renault Duster fit on Terrano 3?

No, despite the common platform B0, the bumpers are different:

  • 🚗 Fastenings to side members on Duster already by 20 mm.
  • 🚗 The shape of the side edges does not match the arches Terrano 3.
  • 🚗 The holes for the fog lights are shifted.

The exception is the bumper from Renault Kaptur (first generation), but it requires modification of the fastenings.

How much does it cost to replace a bumper at a service center?

Cost of work (excluding parts):

  • 🔧 Replacing the bumper - 1,500–2,500 rub.
  • 🔧 Painting (removal/installation + material) — 6,000–12,000 rub.
  • 🔧 Crack repair (welding + putty) — 2,000–4,000 rub.

In the regions, prices are 20–30% lower than in Moscow. If the bumper requires straightening, add another 1,500–3,000 rubles.