Nissan Sunny FB15 is a popular sedan, which is known on the Russian market for its reliability and unpretentiousness. However, the rear bumper of this model often becomes the object of attention: from minor scratches after parking to serious cracks after an accident. Unlike European analogues, the bumper FB15 has a unique shape with integrated fog lights and parking sensor mounting points, making it difficult to find a replacement.

In this article we will look at everything you need to know about the rear bumper. Sunny FB15: from original articles and proven analogues to step-by-step instructions for dismantling and repair. We will pay special attention typical problems - for example, why the plastic of the bumper cracks at sub-zero temperatures and how to avoid corrosion of the fasteners. We will also compare prices for new and used parts so that you can choose the best option without overpaying.

Original articles and analogues of the rear bumper for Nissan Sunny FB15

Rear bumper for Sunny FB15 (2011–2017) is supplied under several articles depending on the configuration and sales market. Original part from Nissan has a catalog number 62610-4M000 (no coloring) or 62610-4M00A (with factory painting to match the body color). Important: bumpers for versions with LED brake lights and without them they may differ in fastenings!

The cost of a new original bumper in official dealers starts from 28,000–35,000 rubles, which makes it not the most budget option. An alternative is certified analogues from manufacturers:

  • 🔹 Febi (Germany) - art. 38968, price ~18,000 rub. (good price/quality ratio, but adjustments to parking sensor mountings may be required).
  • 🔹 Dello (Japan) - art. 3012601800, price ~22,000 rub. (an exact copy of the original, but rarely available).
  • 🔹 Kian (Taiwan) - art. K626104M000, price ~15,000 rub. (a budget option, but plastic is less resistant to frost).
  • 🔹 AMS (South Korea) - art. NIS-62610-4M000, price ~20,000 rub. (optimal choice for regions with cold climates).

When choosing an analogue, pay attention to manufacturer's marking - some parts may not fit versions with rear view camera or parking sensors. Also check the package contents: the original set includes mounting clips and seals, while analogues often have to purchase them separately.

📊 Which bumper do you prefer for Sunny FB15?
  • Original Nissan
  • Certified analogue (Febi, Dello)
  • Budget analogue (Kian, AMS)
  • Used original from disassembly

How to remove the rear bumper Nissan Sunny FB15: step by step instructions

Removal of the bumper will be required for replacement, repair or installation of additional equipment (for example, parking sensors). Unlike many European cars, on Sunny FB15 the bumper is attached not only to bolts, but also to plastic clips, which are easy to break if removed carelessly. Before starting work, prepare the following tools:

  • 🔧 Phillips and flat screwdrivers (for clips and screws).
  • 🔧 Socket wrench on 10 mm (for bolts fastening to side members).
  • 🔧 Plastic puller or wide chisel (for carefully snapping off the clips).
  • 🔧 Painting tape (so as not to scratch the paint during dismantling).

Sequence of actions:

  1. Disconnect the negative battery terminal - This will prevent a short circuit when disconnecting the sensor wiring.
  2. Remove tail lights (unscrew the 2 bolts with a Phillips screwdriver and carefully pull out the connectors).
  3. Unscrew 4 bolts under the bumper (2 on each side) and 2 bolts in the wheel arches (you will need to turn the wheels out for access).
  4. Use a plastic puller to snap off 6 clips along the lower edge of the bumper and 4 clips at the points of attachment to the wing.
  5. Carefully pull the bumper towards you, having first disconnected the connectors parking sensors And fog light wiring.

Disconnect battery

Remove the tail lights

Turn out the wheels to access the bolts in the arches

Prepare a container for clips and bolts (so as not to lose them)

Take a photo of the wiring location before disconnecting-->

Critical detail: on versions with a rear view camera, the connector is not attached to the bumper, but to a bracket underneath it. When removing the bumper, do not pull on the camera wire - this may damage the cable!

Repairing cracks and chips: is it possible to restore the bumper without replacing it?

Plastic bumper Sunny FB15 made from polypropylene (PP) with added fiberglass, making it impact resistant but susceptible to cracks at low temperatures. If the damage is not critical (cracks up to 10 cm, chips without deformation), the bumper can be repaired without replacement. Let's look at proven methods:

1. Welding plastic

For deep cracks use soldering iron with plastic attachment or a hair dryer. Technology:

  • 🔥 Warm up the edges of the crack with a hairdryer (temperature ~300°C).
  • 🔥 Swim into the rift polypropylene rod (sold in bumper repair stores).
  • 🔥 Sand the seam with sandpaper P120→P400 and cover with soil.

Cost of repairs in service: from 3,000 to 6,000 rubles depending on the length of the crack.

2. Fiberglass reinforcement

Suitable for through cracks or broken fragments. Work order:

  1. Clean the damaged area down to clean plastic.
  2. Paste on the wrong side fiberglassimpregnated with epoxy resin.
  3. After drying (24 hours), putty and paint.
💡

Before repairing, warm up the bumper with a hair dryer - this will remove moisture from microcracks and improve the adhesion of materials.

⚠️ Attention: Do not use for bumper repairs Sunny FB15 regular superglue or epoxy without reinforcement - at sub-zero temperatures, such a seam will crack in 1-2 seasons.

Painting a bumper: technology and common mistakes

Rear bumper painting Nissan Sunny FB15 requires a special approach due to plastic texture and the need for precise color selection. Original paint code for most versions - KAD (Silver Metallic) or B54 (Dark Grey), but shades may vary depending on the year of manufacture. Let's look at the stages of painting:

Stage Materials/tools Drying time
Degreasing Antisilicone, lint-free cloth 10 minutes
Primer Primer for plastic (adhesive), spray gun 1–2 hours
Painting Auto enamel (color code), acrylic thinner 24 hours
Varnishing Two-component varnish, polishing paste 48 hours

Typical mistakes when painting:

  • 🚫 Skip a stage primers for plastic — the paint will peel off after 3–6 months.
  • 🚫Usage nitro paints instead of acrylic - it destroys polypropylene.
  • 🚫 Painting at lower temperatures +15°C or humidity above 60% - leads to a matte coating.

Cost of professional painting service: from 8,000 to 15,000 rubles (depending on the complexity and number of layers). Do-it-yourself painting will cost 3,000–5,000 rubles (taking into account materials), but requires experience with a spray gun.

Replacing fasteners and clips: why does the bumper “walk”?

A common problem after replacing or repairing a bumper Sunny FB15 - him backlash (the bumper “dangles” when pressed). The reason lies in worn fasteners or improper installation. Let's figure out what details need to be checked:

  • 🔩 Bolts for fastening to side members (art. 08905-40615) - threads often rust or break off.
  • 🔩 Piston clips (art. 08915-40616) - break when dismantled, there should be 10 pieces in the set.
  • 🔩 Sealing rubber bushings (art. 62630-4M000) — over time they become tanned and do not fix the bumper.
  • 🔩 Parking sensor mounting brackets - often absent on used bumpers.

⚠️ Attention: If after installation the bumper does not fit tightly to the wing, check adjusting bolts on brackets (they allow you to move the bumper left/right by 5–7 mm). On versions with rear view camera Also check the fastening of the camera bracket - its play can be transmitted to the entire bumper.

How to check the fasteners without removing the bumper?

Press the bumper where it attaches to the side members (at the edges under the headlights). If you hear a creaking or play of more than 2-3 mm, the clips or bolts require replacement. Also inspect the gaps between the bumper and the fender - if they are uneven, the problem is in the brackets.

Price comparison: new bumper vs. used vs. renovation

The choice between buying a new bumper, a used part, or repairing an old one depends on your budget and the extent of the damage. Below is a comparison table for Nissan Sunny FB15 (prices are current for 2026 for the Moscow region):

Option Cost (RUB) Pros Cons
New original 28 000–35 000 Perfect fit, 1 year warranty Long wait (made to order), high price
New analogue (Febi, Dello) 15 000–22 000 Fast delivery, acceptable quality May require adjustment
Used original (disassembly) 8 000–15 000 Low price, original quality Risk of hidden damage, no guarantee
Repair + painting 5 000–12 000 The original part is preserved, quickly Not suitable for severe deformations

Tip: if the bumper is damaged less than 30%, repair will be more profitable than buying a new one. For used parts, be sure to check:

  • 🔍 Condition parking sensor mounts (often break during dismantling).
  • 🔍 Absence hidden cracks (look from the wrong side).
  • 🔍 Compatible with VIN code (bumpers for different markets may vary).

Installation of additional equipment: parking sensors, camera, protection

Rear bumper Sunny FB15 allows you to install additional equipment without major modifications. Let's look at the popular options:

1. Parking sensors

To install parking sensors you will need:

  • 📏 Drill holes with diameter 22 mm (the template usually comes with parking sensors).
  • 🔧 Connect the control unit to rear light wiring (+12V power is taken from the reverse lamp).
  • 🎨 Paint the sensors in the color of the bumper (use spray paint the same code).

Recommended models: Parkmaster 4-touch (price ~5,000 rub.) or Sho-Me PS-400 (~6,500 rub.).

2. Rear view camera

On Sunny FB15 the camera is installed in hole for trunk handle or in special bracket under the license plate. To connect to the radio you will need:

  1. Lay the cable from the camera to the head unit (via rubber seal between trunk and interior).
  2. Connect camera power to reverse lamp (to be activated when reverse gear is engaged).
  3. Adjust the image in the radio menu (viewing angle, brightness).

⚠️ Attention: When installing the camera in the bumper, avoid drilling near fastenings to side members - this will weaken the structure. Optimal place: lower left corner of bumper, where the plastic is thicker.

3. Protective pad (anti-gravel)

To protect the bumper from chips and scratches use:

  • 🛡️ 3M Scotchgard film (transparent, price ~4,000 rubles per set).
  • 🛡️ Vinyl overlay (price ~7,000 rubles, suitable for masking minor defects).
  • 🛡️ Liquid Case (Ceramic Pro) (applied as a coating, cost from 10,000 rubles).
💡

When installing parking sensors or a camera, be sure to check the tightness of the holes - water getting into the bumper will lead to corrosion of the mounts and failure of the sensors.

FAQ: Frequently asked questions about the rear bumper Nissan Sunny FB15

Is it possible to install a bumper from a Nissan Almera N16 on a Sunny FB15?

No, these bumpers incompatible. U Almera N16 different shape, fastenings and dimensions. The only exception is some universal bumpers from tuning studios, but they require modifications to the body.

Why did white streaks appear on the bumper after washing?

This efflorescence - calcium salts that appear due to the use of hard water or aggressive detergents. You can delete them vinegar solution (1:1) or a special cleaner Sonax Plastic Cleaner.

What glue is best for repairing cracks?

For Sunny FB15 recommended two-component adhesive for polypropylene, for example:

  • 3M Scotch-Weld DP8005 (price ~1,500 rub.).
  • Loctite Plastics Bonding System (~1,200 rub.).

Regular superglue or epoxy will not fit - they cannot withstand vibrations and temperature changes.

What to do if after an accident the bumper touches the wheel?

This is a sign deformation of mounting brackets or spars. You won't be able to fix the problem yourself - you need to straightening on the slipway in a body shop. Temporary solution: loosen the bumper mounting bolts and adjust its position.

Is it possible to drive without a bumper if it is cracked?

Technically yes, but this unsafe:

  • No protection for rear lights And fuel tank.
  • Moisture will fall on sparswhich will cause corrosion.
  • In some regions of the Russian Federation, driving without a bumper is equivalent to malfunctions (fine 500 rubles under Article 12.5 of the Administrative Code).

If the bumper is held on by clips, it is better to fix it temporarily slings or clamps.