Nissan Almera G15 is one of the most popular foreign cars on the Russian market, and the rear bumper of this car often becomes the object of attention of owners. Whether these are minor scratches after parking, cracks from an accident or a complete replacement due to corrosion - questions about the bumper Almera G15 relevant for thousands of car owners. In this article we will analyze everything: from the choice of original and non-original parts to step-by-step instructions for dismantling and installation, the nuances of painting and repairing plastic.
Feature rear bumper Almera G15 - its construction is made of impact-resistant plastic (usually PP/EPDM or ABS), which withstands minor impacts well, but requires the right approach when repairing. For example, not every glue is suitable for gluing cracks, and incorrect painting can lead to paint peeling off after a month. We have collected expert recommendations to help you avoid common mistakes and save on the service.
Original vs. non-original bumper: what to choose for Almera G15
The first question that arises when replacing is whether to take original part from Nissan or find an analogue. The original bumper guarantees a perfect fit, an exact match with the mounts and durability, but its price can be unpleasantly surprising. For example, a new original bumper (article no. 62610-BM400 or 62610-BM401 for the restyled version) will cost 18,000–25,000 rubles Subject to region and availability.
Non-original bumpers are cheaper (from 6,000 to 12,000 rubles), but here it is important to pay attention to:
- 🔍 Material: Cheap analogues are often made of brittle plastic that cracks at the first impact.
- 📏 Casting precision: Even a millimeter mismatch will lead to installation problems.
- 🎨 Coating quality: some bumpers come already primed, but the primer may not be applied properly.
- 🔧 Complete set: check whether the kit includes mounting clips and seals (they often have to be purchased separately).
Among the proven manufacturers of analogues for Almera G15 stand out Febi, Hella And AMS. However, even they have defective batches - before purchasing, be sure to check the article number with the car’s VIN code or consult with the seller.
⚠️ Attention: Bumpers for pre-restyle (2012–2015) and restyle (2016–2019) Almera G15 not interchangeable! The restyled version has a changed shape of the lower skirt and mountings for parking sensors.
- Original Nissan (expensive but reliable)
- High-quality analogue (Febi, Hella)
- Budget analogue (risky, but cheap)
- Used original from disassembly
Article numbers and compatibility: how not to make a mistake when purchasing
In order not to run into an incompatible part, it is important to know the exact part numbers. For Nissan Almera G15 they depend on the year of manufacture and configuration:
| Modification | Bumper part number | Notes |
|---|---|---|
| Dorestyle (2012–2015) | 62610-BM400 |
Without parking sensors |
| Dorestyle (2012–2015) | 62610-BM401 |
With holes for parking sensors |
| Рестайл (2016–2019) | 62610-BM410 |
New shape, no sensors |
| Restyle (2016–2019) TECHNO | 62610-BM411 |
With sensors and rear view camera |
| Universal (all years) | 62610-4M000 |
Rear bumper trim (skirt) |
If your car is equipped parking sensors or rear view camera, be sure to specify this when ordering. For example, a bumper from the version TECHNO not suitable for basic configuration Comfort, even if the years of manufacture are the same.
Check also color code your car (usually indicated on a sign in the doorway). Popular colors for Almera G15:
- 🔴
KH3— Red "Sunset Orange" - ⚫
KAD— Black "Super Black" - ⚪
QAB— White "Glacier White" - 🔵
LB7— Blue "Brilliant Blue"
If you buy a bumper from a disassembly site, be sure to check the fastenings for the lights and license plate - they often break during an accident and are restored by hand.
Step-by-step instructions for replacing the rear bumper on an Almera G15
Replacing a bumper with your own hands allows you to save 3,000–5,000 rubles on service costs. On average, the process takes 1.5–2 hours if you have a tool. You will need:
- 🔧 Set of sockets and keys (10 mm, 12 mm)
- 🔨 Plastic spatulas for removing clips
- 🔩 Screwdriver with Phillips bit
- 🧲 Magnet for finding fallen bolts
- 🎯 Marker for marking fasteners
Before starting work disconnect the negative terminal of the batteryto avoid short circuit when disconnecting the lamp wiring.
☑️ Preparation for replacing the Almera G15 bumper
Step 1. Removing the old bumper
Start by removing plastic clips in the wheel arches (2-3 pieces on each side). Then unscrew the bolts securing the bumper to the side members (usually 4 bolts of 10 mm). Carefully pull the bumper towards you, having first disconnected the light wiring connectors. If the bumper is stuck, use silicone plastic lubricant to avoid breaking the fasteners.
Step 2. Installing a new bumper
Please check before installation sealing rubber bands on the side members - they often tear when removing the old bumper. The new bumper is first “attached” to the clips, then secured with bolts. Tighten the fasteners criss-crossto avoid distortions. After installation, check the gaps between the bumper and the body - they should be the same on both sides (optimally 3-5 mm).
⚠️ Attention: If you have a version with parking sensors, do not forget to transfer them from the old bumper to the new one! To do this, carefully remove the sensors from their sockets by heating the edge of the bumper with a hairdryer (temperature no higher than 60°C, so as not to damage the plastic).
Repairing cracks and chips: how to restore a bumper without replacing
If the damage to the bumper is not critical (cracks up to 10 cm, chipped paint), it can be repaired. For Almera G15 The following methods are suitable:
1. Bonding cracks
For plastic PP/EPDM (most common for Almera G15) use two-component adhesive adhesive (For example, 3M Scotch-Weld DP8005 or Loctite Plastics). Work order:
- Clean the crack with sandpaper
P80. - Degrease the surface
antisilicon. - Apply glue to the inside of the bumper and close the crack plastic ties (you can use a stapler).
- After drying (24 hours), putty and paint.
2. Soldering plastic
For large cracks or broken pieces, use soldering iron with plastic attachment and solder from the same material (sold in the form of rods). Melting point for PP - about 220–250°C. After soldering, be sure to reinforce the repair area fiberglass and epoxy resin.
What to do if there is a crack near the lamp mount?
In this case, it is better not to take risks with repairs - the vibration from the flashlight will quickly destroy the patch. It is optimal to cut out the damaged area and insert a new insert from the donor bumper, welding it with a soldering iron.
3. Restoring paint chips
For local repairs use paint repair kit with your color code (for example, KH3 for red). Technology:
- 🖌️ Apply primer in 2 layers (drying between layers for 10 minutes).
- 🎨 Paint the chip with a brush or airbrush.
- 💎 Apply varnish and polish with paste
3M 50383.
Painting the Almera G15 bumper: technology and common mistakes
Painting a bumper is a demanding process where mistakes are costly. For example, incorrectly selected soil can lead to paint peeling after 2–3 months, and saving on varnish will result in the color fading quickly. For Almera G15 The following technology is recommended:
1. Surface preparation
The bumper is washable car shampoo, degreased antisilicon and polished:
- For glossy bumpers -
P400–P600. - For matte or previously painted -
P240–P320.
After sanding, apply adhesive primer (For example, PPG DP40) for better adhesion of paint to plastic.
2. Paint application
For Almera G15 use acrylic paint with hardener (proportion 2:1). Apply in 2–3 layers with interlayer drying for 15–20 minutes. Popular paint brands:
- 🎨 Sikkens - high hiding power, durability.
- 🎨 Mobihel - a budget option, but requires more layers.
- 🎨 PPG — optimal price/quality ratio.
3. Varnishing and polishing
The varnish is applied in 2 layers with drying for 30 minutes. After complete drying (24 hours), the bumper is polished abrasive paste (For example, 3M 50417) to remove shagreen.
⚠️ Attention: Do not use nitro paints for bumper Almera G15 - they are incompatible with plastic PP/EPDM and will begin to crack after 1–2 months.
For an ideal result when painting the Almera G15 bumper, use infrared drying - this reduces drying time and improves paint adhesion.
Frequent problems with the rear bumper of Almera G15 and how to avoid them
Owners Almera G15 often encounter typical problems associated with the rear bumper. Here are the most common ones and how to prevent them:
1. Peeling of paint at the joints
Reason: poor surface preparation before painting or use of poor quality primer. To avoid:
- 🔧 Use primer for plastic (For example, Body 960).
- 🔧 Sand the joints especially carefully (grain
P500).
2. Cracks near the lamp mounts
Reason: vibration from faulty lamps or overtightened mounting bolts. Solution:
- 💡 Check it out tightness of lanterns — condensation inside leads to corrosion of the fasteners.
- 🔧 Use rubber gaskets when installing lamps.
3. Corrosion of bumper mounts
Reason: lack of anti-corrosion treatment. Prevention:
- 🛠️ Treat bolts and clips thread lubricant (For example, Liqui Moly LM-40).
- 🛠️ Check the fastenings every six months, especially after pressure washing.
4. Bumper squeaks and rattles
Cause: worn plastic clips or loose bolts. How to fix:
- 🔧 Replace the clips with new ones (item no.
08915-9000Hfor Almera G15). - 🔧 Apply silicone grease to the places where the bumper contacts the body.
Cost of work and parts: where is it more profitable to repair
Prices for replacement and repair of rear bumper Almera G15 vary greatly depending on region and level of service. Below are approximate prices for 2026:
| Type of work/parts | Cost (RUB) | Notes |
|---|---|---|
| Original bumper (new) | 18 000–25 000 | Price depends on color and configuration |
| Analogue (Febi, Hella) | 6 000–12 000 | Excluding painting |
| Replacing the bumper in the service | 3 000–5 000 | Without part cost |
| Crack repair (gluing + painting) | 4 000–8 000 | Depends on the size of the damage |
| Bumper painting | 5 000–10 000 | Includes primer and varnish |
The most budget option is to buy a used bumper from disassembly (price 3,000–7,000 rubles), but here there is a high risk of running into a part with hidden defects. The optimal combination of price/quality is ordering an analogue from a trusted supplier and then painting it in the service.
If you decide to repair the bumper yourself, the costs will be:
- 🛒 Glue for plastic — 500–1,000 rub.
- 🛒 Putty and primer - 800–1,500 rubles.
- 🛒 Paint (spray can) - 1,200–2,000 rubles.
- 🛒 Varnish — 800–1,500 rub.
When buying paint for the Almera G15 bumper, always take 20% more - plastic absorbs more paint than metal, and one can may not be enough.
FAQ: Frequently asked questions about the rear bumper of Nissan Almera G15
Is it possible to install a Restyle bumper on a pre-Restyle Almera G15?
No, bumpers are not interchangeable. The restyled version (2016–2019) has a changed shape of the lower skirt, mountings for parking sensors and cutouts for fog lights (in some trim levels). Even if you can physically secure the bumper, it will look unsightly and may not fit well to the body.
What glue is best for repairing cracks on the Almera G15 bumper?
For plastic PP/EPDM (from which the Almera G15 bumper is made) it is optimal to use two-component adhesives based on polyurethane or epoxy resin:
- 3M Scotch-Weld DP8005 - the best option in terms of reliability, but expensive (about 2,500 rubles).
- Loctite Plastics - a budget alternative (800–1,200 rubles), but requires longer drying.
- Weicon Plastic Repair - Suitable for repairs followed by grinding.
Do not use superglue (cyanoacrylate) - it does not withstand vibrations and the crack will quickly open again.
How much does it cost to paint an Almera G15 bumper in metallic color?
Cost of painting a bumper color metallic (For example, KH3 Sunset Orange or LB7 Brilliant Blue) in the service will be:
- Basic painting (without removing the bumper) - 5,000–7,000 rubles.
- Full painting (with removal, sanding, priming) - RUB 8,000–12,000.
- Painting with transition (if the bumper is partially new) - 10,000–15,000 rubles.
Self-painting will cost 3,000–5,000 rubles. (paint + varnish + consumables), but requires experience - metallic is difficult to apply evenly without smudges.
What to do if after an accident the Almera G15 bumper is bent but not cracked?
If the bumper is deformed, but the plastic is not cracked, it can be straightened using:
- Heating with a hairdryer (temperature 60–80°C) followed by mechanical leveling. Do not overheat - the plastic may lose its strength!
- Hydrocorrector — a special tool for pulling out dents without painting (suitable for minor deformations).
- Reverse hammer with a rubber striker - for large dents.
After alignment, check the bumper geometry using laser level or a ruler - even a slight distortion will be noticeable after installation.
What tools are needed to replace the bumper yourself?
Minimum set of tools for replacing the rear bumper Almera G15:
- 10 mm and 12 mm socket + ratchet handle.
- Phillips screwdriver (for clips in wheel arches).
- Plastic spatulas for removing clips (so as not to break them).
- Magnet on the telescopic handle (for searching for dropped bolts).
- Marker for marking the location of the clips.
- Silicone grease (for treating new clips before installation).
If the bumper comes unpainted, you will additionally need grinder And spray gun (or spray paint).