When choosing a crossover for family or active recreation, many owners are faced with the need to check whether the necessary cargo will fit into the cabin. For model Nissan Qashqai of the second generation (J11 body), this issue is especially acute, since the car is positioned as a city SUV with compact external dimensions, but a fairly spacious interior.
The width of the trunk is not just a number from the data sheet, but a critical parameter that determines the ability to transport long cargo, a baby stroller or large household appliances. In contrast to the length, which often seems sufficient, it is width between wheel arches often becomes a bottleneck that limits the use of space.
Owners often look for information about how the compartment geometry changes when the seats are folded or when a full-size spare tire is installed. A detailed analysis of data from the manufacturer and real measurements taken by car enthusiasts in different configurations will help you understand these nuances. Nissan Qashqai J11.
Basic compartment dimensions and body influence
Official manufacturer figures indicate the total volume of the luggage compartment, but rarely reveal the exact width in the narrowest areas. The J11 body is characterized by an opening that tapers towards the top, which is logical for a crossover with a sloping roof. The overall width of the trunk at the top can reach impressive figures, but the actual usable area is determined by the distance between the inner edges of the wheel arches.
As standard, with the rear seats in the upright position, the boot width is approx. 96-98 cm in the widest place (under the arches). However, if you need to place the load level without tilting it, you should focus on the distance between the arches, which is about 90-92 cm. This is enough for a standard Euro pallet, but may be a bit tight for wide household items.
With the rear row seats folded, the situation changes dramatically. The floor becomes almost flat, and the overall width of the usable space increases, as obstacles in the form of seat backs disappear. In this mode Nissan Qashqai turns into a full-fledged truck, capable of taking on dimensions close to the external dimensions of the car in the opening.
- 📏 Width between arches: about 90 cm (standard seat position)
- 📏 Width at the top of the opening: up to 100-102 cm (depending on the configuration)
- 📏 Depth to the back of the rear seats: about 85-90 cm
⚠️ Attention: Do not forget that the presence of a full-size spare wheel (if it is not hidden deep under the floor) can reduce the height of the loading space, which indirectly affects the ability to install high loads, even if they extend across the width.
Impact of equipment on interior space
Different versions of the model Nissan Qashqai J11 may have slight differences in trunk geometry. For example, all-wheel drive (4x4) versions are often equipped with larger drivetrain components, which may result in slightly reduced underfloor or arch space compared to front-wheel drive counterparts. In addition, the presence of an all-round visibility system or parking sensors requires the installation of sensors, which sometimes protrude into the opening.
The key factor influencing the width is the availability heated rear seats or other options that require additional volume under the door trim. In such cases, the internal width may be 1-2 centimeters smaller than in the basic versions. This is critical for those who plan to transport narrow but long items, where every millimeter matters.
It is also worth considering that in trim levels with a panoramic roof (which is found in top versions), the shape of the opening may have additional design features that affect access to the trunk, although this has virtually no effect on the width of the floor itself. It is important to check specific measurements for your specification as dealers may offer different upholstery and sound insulation options.
- Minimum 400 liters
- Standard 500 liters
- Maximum 1500 liters (with seats folded)
- It doesn't matter, the main thing is the width
Practice tests: what really fits?
Theoretical calculations often differ from practice. To understand the actual capacity, it is necessary to carry out a test load. The most common scenario is transporting a baby stroller. For Nissan Qashqai J11 The width between the arches allows you to easily place a standard stroller when disassembled, and often even when assembled, if it does not have extremely wide wheels.
When transporting bicycles, it is important to consider not only the width, but also the height of the opening. By removing the front wheel, you can fit two bikes in the trunk, but a third will require folding down the rear seats. In this case, the overall length of the cabin will allow them to be placed in length, and the width will ensure the stability of the structure.
For building materials enthusiasts Direct loading of 120cm width is not possible due to the 102cm top limit. Maximum usable width for direct cargo placement is 102 cm.
- 🚲 Two bicycles with wheels removed: fit freely
- 👶 Stroller (carrycot + chassis): fits when assembled
- 📦 Furniture boxes (cabinets, tables): fit when seats are folded
⚠️ Attention: When loading long items, make sure that they do not block the view through the rear window. The use of awnings or nets to secure cargo is mandatory for safety.
Effect of spare tire and trunk floor
Trunk floor design Nissan Qashqai J11 provides space under the spare wheel. This space takes up a significant amount of space, especially if we are talking about a full-size disk. Some trims include a toolbox under the floor, which further reduces the height of the space, but has minimal impact on the width.
If you use a tire instead of a full-size wheel, you will gain additional space under the floor. This allows you to install there, for example, a set of tools or even a small suitcase. However, when using a full-size spare wheel, the height of the trunk in the central part can be reduced by 10-15 cm, which limits the ability to transport tall objects.
It is important to note that the trunk floor is often height adjustable. You can raise it to the level of the opening to get a level surface, but you will lose volume under the floor. Or lower it to get maximum depth, but lose the ability to lay loads evenly over the entire area.
☑️ Checking the trunk is ready for loading
Features of loading with seats folded
If it is necessary to transport large cargo, the rear seats fold in a 40/20/40 ratio. This allows you to fit both long and wide items in the trunk, while still being able to carry passengers in the rear row (in the case of a 40/60 split). The width of the opening in this mode becomes maximum and is limited only by the inner walls of the body.
The folded seats do not form a perfectly flat floor, but a slight slope. This can make it difficult to move heavy objects as they tend to roll backwards. Using special restraints or load pads will help solve this problem. The slope also affects how you load items, as they will need to be tilted slightly when installed.
For maximum convenience, many owners install additional shelves or nets that secure the load and prevent it from shifting during heavy braking. This is especially true when transporting fragile items that can be damaged if they hit the seat backs or arches.
How to fold seats correctly for maximum length
Open the trunk, find the levers on the seat backs, pull them up, fold the seats down carefully, making sure they are locked in the down position.
Comparison with competitors and conclusions
Comparing Nissan Qashqai J11 Compared to competitors in the compact crossover class, it can be noted that its trunk width is at an average level. For example, at Rogue Sport (sold as Qashqai in some markets) or Kia Sportage parameters may differ by 1-2 cm. However, it is the balance between width and length that makes J11 one of the most versatile in its class.
It is important to understand that even a small difference in width can be decisive when choosing a car. If you often have to transport specific loads (for example, wide tool boxes), then it is worth taking personal measurements before purchasing. In some cases, it is better to choose a model with a slightly larger volume but smaller width, or vice versa.
As a result, Nissan Qashqai J11 Offers enough trunk space for most everyday tasks. Its width allows you to transport standard loads without problems, and the ability to fold the seats opens up new horizons for travel and outdoor activities. The main thing is to plan the load correctly and take into account the features of a specific configuration.
- 🏆 Advantage: Balanced dimensions for urban use
- ⚖️ Comparison: Width comparable to main competitors
- 💡 Tip: Regularly check the condition of the floor and seat fastenings
The trunk width of the Nissan Qashqai J11 is sufficient for most tasks, but requires careful planning when transporting non-standard loads, especially in terms of height and angle.
What is the exact width of the Nissan Qashqai J11 trunk between the arches?
The width of the trunk between the wheel arches in the Nissan Qashqai J11 is approximately 90-92 cm. At the widest point (at the top of the opening) this figure can reach 100-102 cm, depending on the configuration and the presence of additional elements.
Is it possible to carry a bicycle in the trunk of a Qashqai J11 without removing the wheels?
In the standard rear seat position, placing a bicycle without removing the front wheel is extremely difficult or impossible due to lack of depth and width. It is recommended to remove the front wheel for comfortable transportation of one or two bicycles.
Does a full-size spare wheel affect the width of the trunk?
A full-size spare wheel mainly affects the height of the loading space, reducing it by 10-15 cm. It practically does not affect the width of the trunk, since it is located centrally under the floor.
How to fold the seats in a Nissan Qashqai J11 for maximum length?
For maximum length, the rear seats fold in a 40/20/40 split. Use the levers located on the seatbacks in the trunk to lower them down. Note the slight slope of the floor.
Is there a difference in trunk size between front-wheel drive and all-wheel drive?
The difference is minimal and concerns mainly the volume under the floor due to the presence of a driveshaft and rear differential in all-wheel drive versions. The width of the opening itself and the usable area are almost identical.