Owners Nissan Juke first (J10, 2010–2014) and second (J11, 2014–2019) generations are often faced with the question: where is the cabin air filter hidden in this compact crossover? Unlike many cars, where the filter is located behind the glove compartment or under the hood, in Juke its location is not obvious. Moreover, in some trim levels the filter may not be present from the factory - its seat is empty, and the owners do not even suspect the need for installation.
This article will not only reveal the exact location of the filter with photographs and diagrams, but will also help you understand the nuances of replacing it. We will tell you how to determine that the filter is clogged, which models are suitable for Juke (including analogues), and why ignoring this detail can lead to mold in the ventilation system or stove failure. You will also learn how to save on service costs and replace the filter yourself in 15 minutes - without a pit or special tools.
Where is the cabin filter in Nissan Juke: photo and diagram
B Nissan Juke The cabin filter is located under the center console on the passenger side, next to the gas pedal. To get to it, you need:
- Move the passenger seat all the way back.
- Remove the plastic pad under the passenger's feet (it is secured with 2-3 clips).
- Under the cover you will see a black plastic box - this is the filter housing.
The photo below shows the exact location:
⚠️ Attention: In basic configurations Juke (especially before 2013) the filter may be missing! Instead there is a plug. If you have never changed the filter, check its presence - perhaps the previous owner simply did not bother to install it.
- Yes, the filter has been installed
- No, there was a stub instead
- I don't know, haven't checked
- I installed it myself
Signs of a clogged filter: when is it time to change it
The manufacturer recommends changing the cabin filter every 15–20 thousand km or once a year. But in the realities of Russian roads (dust, poplar fluff, smog), it is better to reduce this interval to 10–12 thousand km. The following symptoms indicate that the filter is clogged:
- 🌬️ Weak air flow from the deflectors even at maximum fan speed.
- 🤧 Constant smell of dust or mold when you turn on the stove or air conditioner.
- 🚗 Fogging of windows from the inside, which does not pass even when the airflow is on.
- 🦠 Allergic reactions passengers (sneezing, itchy nose) during the trip.
If you ignore these signs, a clogged filter can lead to:
- 🔥 Overheating of the stove motor (due to poor air circulation).
- 🦠 Reproduction of bacteria in the ventilation system (risk of respiratory diseases).
- 💨 Increased fan load, which reduces its resource.
Before replacing the filter, turn on the stove at maximum power and direct the airflow to your feet. If the air flows weakly, this is a sure sign that the filter is clogged.
Which cabin filter to choose for Nissan Juke: original vs analogues
For Nissan Juke The following types of filters are suitable:
| Filter type | Article (original/analogue) | Notes |
|---|---|---|
| Normal (dust) | 27277-JM00A (original)TSN 9.7.841, Mann CU 23004 |
Retains dust, pollen, but not gases. The most budget option. |
| Coal | 27277-JM00B (original)Filtron K 1321A, Bosch 1 987 429 666 |
Absorbs harmful gases (exhausts, gasoline). Recommended for the city. |
| Carbon with antibacterial impregnation | CUK 23004 (Mann)Nissens 854424 |
Additionally prevents mold growth. Optimal for allergy sufferers. |
🔹 Selection advice: If you often drive on the highway or in rural areas, a regular dust filter is sufficient. For the city, it is better to use coal - it neutralizes smog and exhaust gases. Antibacterial impregnation is relevant if children or people with allergies often ride in the car.
⚠️ Attention: Do not buy filters without a rubber seal around the edge! B Juke The filter housing is not sealed, and without a rubber edging, dust will penetrate into the cabin, bypassing the filter.
Step-by-step instructions: how to replace the cabin filter in a Nissan Juke
To replace you will need:
- 🔧 Flat screwdriver (or plastic clip remover).
- 🧹 Vacuum cleaner or damp cloth (to clean the case from dust).
- 📦 New filter (check compatibility by article number!).
☑️ Preparing to replace the filter
Step 1. Removing the decorative trim
The pad under the passenger's feet is attached to 2-3 plastic clips. Carefully pry it with a screwdriver from the edge (from the side of the door) and pull it towards you. The clips are fragile - do not use excessive force!
Step 2. Access to the filter housing
Under the cover you will see a black plastic box with a lid. The lid is secured with latches - press them and pull the lid down.
Step 3: Removing the old filter
Remove the old filter (if there is one). Please note arrow direction on the filter - the new one must be installed in the same way! If there is no filter, remove the plug (it simply comes out).
Step 4: Install a new filter
Before installation, vacuum the filter housing. Insert the new filter with the arrow up (on most models the arrow indicates the direction of air flow). Close the cover and put the cover back on.
What to do if the pad clips are broken?
If the clips are cracked, they can be replaced with new ones (part number 77260-4M000 for Juke). A temporary solution may be to attach the cover with double-sided tape (but this will not last long).
Common replacement mistakes and how to avoid them
Even such a simple procedure as replacing the cabin filter can be ruined by mistakes. That's what can't do:
- 🚫 Install the filter in reverse — if you mix up the direction of the arrow, the filtration efficiency will decrease by 30–40%.
- 🚫 Ignore stub — if the filter was not installed from the factory, some “masters” forget to remove the plug, which is why air does not pass through at all.
- 🚫 Trying to wash the old filter — after washing, the filter loses its properties, and moisture promotes the growth of mold.
- 🚫 Attach the cover to one clip — if you do not snap all the fasteners, the pad will rattle when moving.
If, after replacing the filter, the stove begins to blow weaker, check to see if debris has gotten into the fan. Sometimes leaves or dust clog the blades and need to be cleared.
⚠️ Attention: If, when removing the filter housing cover, you find inside moisture or mold, this means that the air conditioner drain hole is clogged. It needs to be cleaned (it is located under the car, next to the engine compartment).
How much does it cost to replace a cabin filter at a service center vs on your own?
In official services Nissan Replacing the cabin filter costs 800–1,500 rubles (depending on the region). In unofficial car services the price is lower - 500–1,000 rubles. However, if you do it yourself, you will only spend on the filter:
- 💰 Regular filter: 300–600 rubles.
- 💰 Carbon filter: 800–1,500 rubles.
- 💰 Antibacterial filter: 1,200–2,000 rubles.
Thus, DIY replacement saves up to 1,000 rubles in one procedure. And if you consider that the filter needs to be changed once a year, in 5 years you will save 5,000 rubles — an amount sufficient to purchase a high-quality carbon filter for several replacements in advance.
Buy filters in bulk (for example, 2-3 pieces at once). Many online stores give a discount when ordering 2 units or more, and the filters do not deteriorate during storage.
FAQ: Frequently asked questions about the Nissan Juke cabin filter
Is it possible to drive without a cabin filter?
Technically yes, but it is harmful to your health and your car. Without a filter, dust, soot, pollen, as well as exhaust gases from cars in front enter the cabin. In addition, the furnace and air conditioner will clog faster, which will lead to their breakdown.
How can you tell if the filter is installed correctly?
After installation, turn on the fan at maximum speed. If the air flow has become stronger and unpleasant odors have disappeared, the filter is installed correctly. Also check for whistling or unusual noises (this may indicate a loose seal).
What is the difference between the filter for Juke J10 and J11?
Filters for Nissan Juke first (J10, 2010–2014) and second (J11, 2014–2019) generations interchangeable. Dimensions and seats are identical. The exception is restyled models 2017–2019 with climate control, where the shape of the housing may differ (but the filter remains the same).
Can I use a filter from another car?
Sometimes owners try to install filters from Renault Captur or Dacia Dusterbecause they look similar. However, in fact, they may not be suitable in thickness or shape. It is better to take a filter with the article number indicated in our table above.
What should you do if, after replacing the filter, the cabin smells like burning?
This is a sign that dirt or mold has accumulated in the ventilation system. It is recommended to carry out air conditioner disinfection special foam (for example, Liqui Moly Klima-Anlagen-Reiniger). Also check for debris in the air ducts.