Owners and fans Nissan Safari 510 (known in some countries as Patrol 160) are often faced with the need to find out the exact dimensions of a car in inches - especially when it comes to selecting spare parts, tires or planning transportation. This SUV, released in the 1980s, is still in demand due to its reliability and cross-country ability, but the original documentation does not always contain data in units of measurement familiar to the American or European market.

In this article we will not only provide the exact dimensions Safari 510 in inches, but we'll also explain how to correctly convert metric values, compare dimensions with other popular SUVs of the period, and also give practical recommendations for choosing accessories. We will pay special attention to nuances that are often overlooked: for example, how taking into account ground clearance in inches affects the choice of tires or why the width of the mirrors may differ from the passport data.

Official dimensions of Nissan Safari 510 in inches: correspondence table

Standard dimensions Safari 510 (body Y60, 1987–1997) in the metric system are well known, but for accurate selection of foreign-made parts or accessories, conversion to inches is required. Below is a table with official manufacturer data, rounded to hundredths of an inch for ease of use.

Parameter Value in mm Value in inches Notes
Length (without spare wheel) 4850 190.94 With spare tire on tailgate +2.5 inches
Width (without mirrors) 1790 70.47 Including rear view mirrors +7.87 inches
Height (without roof rails) 1885 74.21 With roof rails +1.57 inches
Wheelbase 2850 112.20 Same for all modifications
Ground clearance (ground clearance) 210 8.27 For versions with factory lift +1.18 inches

It is important to note that the data provided is relevant for standard. Vehicles with aftermarket modifications (such as lift kits or fender flares) may have different performance. For example, popular elevator kits from Old Man Emu or Ironman 4x4 increase clearance to 10.5–11 inches, which is critical when choosing shock absorbers or crankcase protection.

⚠️ Attention: When ordering parts from the US or Australia, always check to see if the seller takes into account the dimensions in inches, taking into account factory tolerances (for example, for bumpers or engine protection). A difference of 0.2-0.3 inches can cause installation problems.

How to correctly convert millimeters to inches for Safari 510

Many owners Nissan Safari 510 are faced with the need to independently convert sizes from the metric system to inches. For this purpose the coefficient is used 1 inch = 25.4 mm. However, in practice it is important to remember two nuances:

  1. Rounding: When ordering spare parts (for example, door seals or rubber boots), rounding to the nearest hundredth of an inch is mandatory. For example, the width of the windshield 1450 mm it will be in inches 57.09, not 57.1.
  2. Cumulative error: When measuring large parts (for example, frame length), the total rounding error can reach 0.2–0.3 inches, which is critical for an accurate fit.

You can use online converters or mobile apps to simplify the calculations, but we recommend checking the results manually. For example:



Формула: [размер в мм] ÷ 25.4 = [размер в дюймах]


Пример для клиренса:


210 мм ÷ 25.4 = 8.2677 → округление до 8.27 дюйма

💡

When measuring the dimensions of a car, use a metal tape measure with a double scale (mm/inches) - this will minimize errors when converting units.

Size comparison of the Safari 510 with other SUVs from the 1980s and 1990s

To better understand the dimensions Safari 510, it is useful to compare them with competitors of the period. Below are the data for popular models in inches:

  • 🚙 Toyota Land Cruiser 60 (1980–1990): length - 185.04, width - 72.44, height - 74.80. Safari 510 longer by 5.9 inches, but narrower by 1.97 inches.
  • 🚙 Mitsubishi Pajero 1st generation (1982–1991): length - 169.29, width - 66.93. Significantly more compact, but with lower ground clearance (7.48 inches).
  • 🚙 Land Rover Defender 110 (1983–1990): length - 183.86, width - 70.08. Almost identical width, but shorter height (72.83 inches).
  • 🚙 Ford Bronco (1980–1986): length - 180.5, width - 79.1. Wider by 8.63 inches, which affects maneuverability in the forest.

I wonder what Safari 510 occupies an intermediate position between compact SUVs (like Suzuki Jimny) and full-size models (for example, Chevrolet Suburban). This makes it a versatile choice for those looking for a balance between city handling and off-road capability.

📊 Which 1980s SUV do you like best?
  • Nissan Safari 510
  • Toyota Land Cruiser 60
  • Mitsubishi Pajero
  • Land Rover Defender
  • Ford Bronco
  • Other

Practical advice on choosing tires and wheels for the Safari 510

Knowing your vehicle's exact dimensions in inches is critical when selecting tires and wheels, especially if you plan on installing custom kits. For Safari 510 The manufacturer recommends the following parameters:

  • 🔧 Standard tire size: 235/75 R15 (diameter ~29.9 inches).
  • 🔧 Maximum permissible diameter: 31 inches without modifications (with elevator - up to 33 inches).
  • 🔧 Disc offset (ET): from +15 to +25 mm (in inches: +0.59 to +0.98).
  • 🔧 Rims width: 6–7.5 inches (original - 6J).

When choosing custom tires, consider:

  1. Increasing tire diameter by 1 inch reduces ground clearance by 0.5 inches (due to suspension compression).
  2. Tires wider than 10.5 inches can touch the arches when the steering wheel is turned completely.
  3. For discs with an offset of less than +15 mm requires checking for compatibility with brake calipers.

☑️ Selection of tires for Safari 510

Done: 0 / 4
⚠️ Attention: When installing tires with diameter 33 inches and more on Safari 510 Without a suspension lift, the risk of damage to the wings when the shock absorbers are fully compressed is 80%. It is recommended to first check the clearances using the "full turn + maximum load" test.

The nuances of transportation and storage: why dimensions in inches are important

During transportation Nissan Safari 510 by sea or transport (for example, when importing from Japan), the car's dimensions in inches become a key parameter for calculating the cost. Most logistics companies use inches for pricing, and an error in calculations can lead to additional costs.

Key points:

  • 📦 Container transportation: A standard 20ft container has an internal width 92.5 inches. Safari 510 (70.47 inches) fits with a margin, but taking into account the mirrors, diagonal loading is required.
  • ✈️ Air transportation: The maximum altitude for most cargo aircraft is 96 inches. Including roof rails (75.78 inches) there are no problems, but installation of a roof rack may require special permission.
  • 🚢 Sea transport: When loading onto a ro-ro carrier, it is taken into account maximum height including antennas (up to 100 inches).

Also, dimensions in inches are useful when choosing a garage or parking space. For example, in the USA the standard width of a parking space is 96 inches, which allows you to open doors Safari 510 without the risk of damaging neighboring cars (provided parking is in the center).

How to measure a car for transportation?

For accurate calculations, use a laser rangefinder or a tape measure with an assistant. Measure:

1. Maximum height (including antennas, roof rails, trunk).

2. Width at the extreme points (mirrors, tow bar, winch).

3. Length including spare wheel and bumper.

Add 2 inches to each setting for margin.

Common mistakes when working with Safari 510 sizes

Even experienced owners Nissan Safari 510 Sometimes they make mistakes when working with the dimensions of the car. Here are the most common ones:

  1. Ignoring factory tolerances: The documentation shows nominal dimensions, but actual values may vary by ±0.4 inches due to the nature of the assembly. Always double check critical parameters (such as hub diameter) before ordering parts.
  2. Confusion between "body width" and "mirror width": Many accessory sellers specify the width without taking into account mirrors, which leads to problems when installing side step bumpers or sill protection.
  3. Not taking into account changes in clearance: After replacing springs or shock absorbers, the ground clearance may change to 1–1.5 inches, which will affect the choice of tires or crankcase protection.
  4. Errors during conversion: Using the coefficient 1 inch = 25 mm instead of exact 25.4 mm gives an error of up to 1.6%, which is critical for precision parts.

To avoid these mistakes, we recommend:

  • 📏 Always measure details in two systems (mm and inches) before ordering.
  • 📄 Save photographs of original parts with a ruler to visually confirm dimensions.
  • 🤝 Consult with sellers who specialize in Nissan Patrol/Safari — they know the specifics of the model.
💡

When ordering parts from abroad, always check in which units the dimensions are indicated in the catalog. Some Japanese manufacturers use own standards (For example, 1 sun = 30.3 mm), which adds further confusion.

FAQ: Answers to frequently asked questions about Safari 510 sizes

Can I install 35" tires on the Safari 510 without a suspension lift?

No, this is not possible without major modifications. Maximum tire diameter for standard suspension - 31 inches. For 35-inch tires required:

  • Suspension lift on 4-6 inches.
  • Trimming or replacing arches.
  • Replacement of steering rods and shock absorbers.

Without these changes, the tires will touch the wheel arch liners and suspension components.

What size roof rack is suitable for Safari 510?

Optimal trunk dimensions:

  • Length: to 60 inches (so as not to block access to the trunk door).
  • Width: to 45 inches (including roof rails).
  • Height: to 15 inches (so as not to exceed the overall height of the vehicle in 90 inches).

Recommended models: Thule Motion XT (size L) or Yakima SkyBox.

What is the width of the Safari 510 seats in inches?

Seat dimensions:

  • Front seats: width 20.5 inches each (without armrests).
  • Rear sofa: overall width 58.3 inches (for three passengers).
  • Depth: 22 inches (standard), 24 inches (with comfort pillow).

This data will be useful when choosing covers or child seats.

How to measure Safari 510 ground clearance yourself?

For accurate measurement:

  1. Prepare a level surface and a ruler with a level.
  2. Measure the distance from the ground to:
    • Lowest point of the front bumper.
    • Crankcase protection (if installed).
    • Rear axle.
  • Write down the minimum value - this is the real ground clearance.

    • For Safari 510 the difference between front and rear clearance can reach 0.8 inches.

    Where can I find original Safari 510 drawings with dimensions?

    Original drawings can be found in the following sources:

    • 📖 Repair manual: Nissan Patrol/Y60 Service Manual (section Body Dimensions).
    • 🌐 Online archives: Websites Patrol4x4.com or NissanOffroad.com (in the technical documentation section).
    • 📦 Dealer catalogues: Spare parts for Safari 510 often supplied with mounting diagrams and dimensions.

    Please note that the drawings are for the Japanese market (Y60) and Europe (Safari) may differ in small details (for example, the location of the bumper mounts).