Replacing windshield wiper blades with Nissan Note E11 (2006–2013) - a seemingly simple procedure, but errors in the selection of wiper sizes or types can lead to poor glass cleaning, squeaking, or even damage to the mechanism. Owners of this compact van often encounter confusion: depending on the year of manufacture and configuration, the length of the brushes may differ, and manufacturers do not always indicate the exact parameters in catalogs.
In this article we will look at original wiper sizes for all modifications of Note E11, including restyled versions, we will tell you how to correctly measure the brushes yourself, and give recommendations on choosing analogues from Bosch, Denso, Valeo and other brands. You will also learn what replacement mistakes lead to rapid wear of new brushes and how to extend their service life.
Original wiper blade sizes for Nissan Note E11
Standard wiper sizes for Nissan Note E11 depend on the body type and year of manufacture. The basic configuration (before restyling in 2009) was equipped with brushes of the following sizes:
- 🚗 Driver's side (left brush): 26 inches (660 mm).
- 🚗 Passenger side (right brush): 16 inches (400 mm).
- 🚗 Rear wiper (if equipped): 12 inches (300 mm).
After restyling in 2009 on some versions (for example, Note 1.6 Tekna) extended brushes were installed: 28 inches (710 mm) driver's side. This is due to changes in the shape of the windshield and the cleaning area. To determine the exact size, check the markings on old brushes or use the table below.
| Year of manufacture | Equipment | Left brush (driver) | Right brush (passenger) | Rear brush |
|---|---|---|---|---|
| 2006–2009 | Basic, Comfort, Elegance | 26" (660 mm) | 16" (400 mm) | 12" (300 mm) |
| 2009–2013 | Restyling, Tekna, Acenta | 28" (710 mm) | 16" (400 mm) | 12" (300 mm) |
| 2010–2013 | Special versions (for example, Note Nismo) | 26" (660 mm) | 14" (350 mm) | 12" (300 mm) |
Important: On cars with the “heated wiper area” option (for example, in northern versions), blades with a metal frame can be installed instead of frameless ones, even if the dimensions are the same. This affects the compatibility of analogues.
- Original Nissan
- Bosch Aerotwin
- Denso Flat Blade
- Valeo Silencio
- Others
How to measure your own windshield wiper blades
If you are unsure of the size or the markings on old brushes have worn off, measure them by hand. To do this:
- Remove the brush from the lever by pressing the lock (usually located at the bottom of the mount).
- Place it on a flat surface and measure the length from one edge of the rubber band to the other excluding plastic plugs.
- Round the result to the nearest standard size (e.g. 655 mm → 26 inches).
Please note: on Nissan Note E11 brushes are used hook-type fasteners or "bayonet" (depending on the year). Check the type of fastening before purchasing - some analogues (for example, Bosch Aerotwin) are supplied with universal adapters.
⚠️ Attention: Do not measure the brush against the metal frame - the length of the rubber band may be 10-15 mm shorter. This is critical for frameless models.
Check the year of manufacture and equipment of Note E11|
Measure the length of the old brushes (without plugs)|
Check fastening type (hook/bayonet)|
Pay attention to the presence of heating of the wiper area (if any) |
Compare catalog numbers of original and analog brushes -->
The best analogs of original brushes for Nissan Note E11
Original brushes Nissan (article 28260-4M000 for the driver's side and 28261-4M000 for passenger) are expensive and not always available. Fortunately, there are proven analogues with the best price-quality ratio:
- 🔹 Bosch Aerotwin AR660S/AR400S — frameless brushes with an asymmetrical profile for a better fit. Suitable for all versions of Note E11, including restyling.
- 🔹 Denso DF-026/DF-016 — frame brushes with graphite coating for quiet operation. Optimal for winter use.
- 🔹 Valeo Silencio X-Wiper 660/400 — frameless with “Silentium” technology to reduce noise at high speeds.
- 🔹 Champion EasyVision 26"/16" — a budget option with good wear resistance (suitable for regions with temperate climates).
For rear window we recommend Valeo 600303 (300 mm) or Bosch 3397004666 — they do a better job of cleaning vertical surfaces thanks to a special rubber profile.
⚠️ Attention: Cheap, unbranded brushes often have inaccurate lengths (for example, 650 mm instead of 660 mm). This leads to incomplete cleaning of the edges of the windshield and rapid wear of the rubber.
If you live in an area with frequent rainfall, choose brushes with hydrophobic coating (For example, Bosch Aerotwin or Valeo Aquablade). They repel water better and remain effective longer.
Common mistakes when replacing windshield wiper blades
Even experienced car owners sometimes make mistakes that shorten the life of their wipers or impair visibility. Here are the most common:
- 🚫 Mismatch of fastening types. For example, an attempt to install a brush with a “bayonet” fastening on a lever under a “hook” (or vice versa). This leads to play and incomplete cleaning.
- 🚫 Ignoring lever wear. If the wiper arms are bent or rusty, the new blades will not work as well, even if the dimensions are the same.
- 🚫 Buying “universal” brushes without adapters. Such models are often not suitable for Note E11 due to the non-standard bend of the windshield.
- 🚫 Using brushes that have expired. Rubber wipers lose elasticity after 2-3 years, even in packaging.
Another common problem is incorrect installation. For example, if you mix up the left and right brushes (yes, they can be different in shape!), this will lead to uneven pressure on the glass and the appearance of streaks. Always check the labeling on the packaging.
What to do if new brushes squeak?
Creaking usually occurs due to:
1) Incorrect fit — check if there are any gaps between the brush and the glass.
2) Rubber contamination — wipe the tape with alcohol or a special cleaner.
3) Low quality material — cheap tires become dull in the cold.
If the squeaking persists, try applying it to the glass. silicone grease (not on the brush itself!).
How to extend the life of your windshield wiper blades
The average service life of brushes is 6–12 months, but with proper care they can be used longer. Here's what experts recommend:
- 💧 Clean brushes regularly. Once a month, wipe the rubber band with a damp cloth to remove sand and tar. Suitable for this
isopropyl alcoholor special cleaners (for example, Sonax Glass Cleaner). - ❄️ Prepare your wipers for winter. Treat your tires before frost silicone grease (not to be confused with WD-40!). This will prevent it from freezing to the glass.
- 🚿 Do not turn on the wipers on dry glass. This leads to micro-tears in the rubber. Always use washer.
- 🔧 Check lever pressure. If the brushes are weakly pressed against the glass, tighten the nuts securing the arms (but do not overdo it - this may deform the glass!).
Also avoid car washes with aggressive chemicals - alkaline shampoos destroy the rubber of the wipers. If you frequently wash your car by hand, use PH-neutral detergents.
The most common cause of premature brush wear is sand and road dirt, which act as an abrasive. Regular cleaning of the belt extends its service life by 1.5–2 times.
Where to buy brushes for Nissan Note E11: verified stores and prices
Original brushes Nissan can be ordered from official dealers (price from 1,200 to 1,800 rubles per set), but analogues are often more profitable. Here's where to look for them:
- 🛒 Auto stores: AutoSpetsCenter, AutoAll, AutoProfi — here you can touch the brushes before purchasing and check the fastening.
- 🌍 Online platforms:
- Wildberries (prices are 20–30% lower than store prices, but there is a risk of running into a fake).
- Exist.ru or Autodoc.ru (guarantee of originality, wide range).
- AliExpress (only for verified sellers with a rating above 98%).
- 🔧 Service station: Many services sell brushes with installation (the cost of the work is 200–300 rubles).
Average prices for analogues (for 2026):
- Bosch Aerotwin — 800–1,200 rub. per set.
- Denso Flat Blade — 600–900 rub.
- Valeo Silencio — 700–1,100 rub.
- Budget options (Champion, SWF) — 300–500 rub.
⚠️ Attention: When purchasing on marketplaces, check the reviews of a specific seller. Counterfeits Bosch or Denso often have inaccurate dimensions and dry out quickly.
FAQ: Frequently asked questions about wiper blades for Nissan Note E11
Is it possible to install brushes longer than the original ones?
No, this is fraught with several problems:
- The load on the windshield wiper motor increases, which can lead to its breakdown.
- The brushes will touch each other or the edges of the glass, leaving streaks.
- At high speeds, long brushes can fly up due to aerodynamics.
Maximum deviation from the original size - ±1 inch (25 mm).
How often do you need to change the brushes on Note E11?
Recommended replacement interval - every 6–12 months, but it depends on the operating conditions:
- In cities with high dust levels (for example, Moscow, Yekaterinburg) - once every 6 months.
- In regions with a mild climate and rare precipitation - once every 12–18 months.
- For intensive use (for example, daily trips on the highway) - once every 4-5 months.
Signs of wear: streaks on glass, squeaking, uneven cleaning.
Will brushes from Nissan Micra K13 fit?
Partially. Nissan Micra K13 (2010–2017) has similar wiper sizes:
- Driver's side: 26" (660 mm) - same as pre-styling Note E11.
- Passenger side: 14" (350 mm) - shorter than most versions Note.
Thus, driver's brush from Micra K13 can be used, but the passenger side only if your Note E11 refers to special versions (for example, Nismo).
What to do if the brushes freeze in winter?
The problem of brushes freezing to the glass is typical for Nissan Note E11 due to the close contact of the rubber. Solutions:
- Before parking, raise the wipers to the vertical position (if the design allows it).
- Treat the rubber silicone grease (not oily!).
- Use winter brushes with a protective cover (for example, Denso Winter Wiper).
- Do not turn on the wipers immediately after starting the engine - let the ice melt a little from the heating of the glass.
⚠️ Attention: Never tear off frozen brushes by force - this will tear the rubber. Pour warm (not hot!) water or use a lock defroster.
Is it possible to restore old brushes?
Partially. If the rubber is not torn, but has lost its elasticity, try the following methods:
- Soak the brushes for 10–15 minutes in warm water with soap, then wipe with alcohol.
- Apply to rubber glycerin (sold in pharmacies) - this will temporarily restore flexibility.
- If the tape is worn unevenly, carefully trim it with a utility knife (for frame brushes only!).
However, these measures will extend the life of the brushes by a maximum of 1–2 months. For a long-term solution, it is better to buy new ones.