Nissan X-Trail T31 (2007–2013) is one of the most popular crossovers on the Russian market, but even such reliable cars require windshield replacement over time. The reasons are different: a chip from a stone on the highway, a crack from a temperature change, or simple wear of the seal. The main thing is to know exact glass dimensionsso as not to run into a fake or an unsuitable analogue.
In this article we will analyze Dimensions of the original windshield for X-Trail T31, we will give article numbers of factory and alternative options, and also tell you about the intricacies of replacement. We will pay special attention the difference between glasses for restyled and pre-restyled versions - this is critical when ordering.
Original windshield dimensions Nissan X-Trail T31
Standard windshield for X-Trail T31 (2007–2010, before restyling) has the following dimensions:
- 📏 Height: 1050 mm (±5 mm)
- 📐 Width: 1450 mm (±10 mm)
- 🔹 Thickness: 4.76 mm (laminated, with tinted stripe on top)
- 🔧 Mount: adhesive (urethane sealant)
After restyling in 2010 (models 2011–2013), the dimensions remained almost identical, but changed shape of the bottom corners — they became more rounded. This is important to consider when purchasing, since glass from a pre-restyling vehicle will not physically fit on a restyled car (and vice versa).
Original glass is produced by the company NSG/Pilkingtons (article 28060-JM00A for dorestayla and 28060-JM01A for restyling). Comes with black edge around the perimeter (10–12 mm wide), which covers the adhesive seam.
- Original (Nissan/NSG)
- Analog (Sekurit, Saint-Gobain)
- Chinese unoriginal
- I don't know
Articles and analogues: what to choose instead of the original?
Original glass from Nissan will cost 25–35 thousand rubles (depending on the region), but there are worthy analogues on the market from trusted manufacturers. The main thing is to make sure that the analogue is certified according to the standard ECE R43 (European safety certificate).
| Manufacturer | Article | Applicability | Average price (RUB) | Features |
|---|---|---|---|---|
| NSG/Pilkingtons (original) | 28060-JM00A / 28060-JM01A |
Dorestayl / Restayl | 25 000–35 000 | Best quality, no optical distortion |
| Saint-Gobain Sekurit | 555 105 068 / 555 105 069 |
Dorestayl / Restayl | 18 000–22 000 | French quality, precise geometry |
| XYG (China) | FW0101N |
Universal (suitable for both options) | 8 000–12 000 | Budget option, possible distortion at the edges |
| BOS (Korea) | GW-1012 |
Restyle (2011–2013) | 14 000–18 000 | Good price-quality ratio |
⚠️ Attention: When purchasing an analogue, be sure to check availability production dates (printed on glass) - glass older than 3-5 years may lose strength due to degradation of the laminating layer.
If you choose between the original and the analogue, focus on your budget and operating conditions. For regions with severe winters (−30°C and below) it’s better to take the original or Saint-Gobain - cheap Chinese glass often cracks due to temperature changes.
How to determine: dorestyle or restyle?
This is a key point when ordering glass. An error will result in the glass simply not fitting into the opening. Here's how to distinguish between versions:
- 🔍 Headlights: On restyling (2011–2013) the headlights have chrome trim and slightly modified shape.
- 🚗 Bumpers: The restyled bumper is more massive, with integrated foglights (on the pre-restyle they are round and placed separately).
- 🔄 Steering wheel: On the restyle it is three-spoke (as on Qashqai J10), on dorestayle - four-spoke.
- 📅 VIN code: First 3 characters
JN1T- dorestayl,JN8T- Restyle.
When in doubt, take a photo windshield top (from the interior) and compare with photos in catalogs. The Restyle has smoother lower corners, and the transition line to the roof is less sharp.
How to check the VIN code of X-Trail T31?
The VIN is located on a plate under the windshield (driver's side) and in the upper left corner of the dashboard. It can also be seen through the driver's door window. The first 3 characters will indicate the year of manufacture and the sales market (for example, JN1 - Japan, pre-restyle; JN8 - restyle).
Step-by-step instructions for replacing a windshield
Self-replacement is possible, but requires care and special tools. If you have never dealt with auto glass, it is better to contact a service center - an error during gluing can lead to leaks or glass breaking at speed.
If you decide to change it yourself, prepare:
String or knife for cutting caulk | Suction cups for removing glass (minimum 2 pieces) | Urethane adhesive sealant (e.g. Dow Automotive Betaseal)|Primer for bodywork|Scraper for removing old glue|Gloves and mask (glue is toxic!)-->
Replacement process:
- Remove the wipers, plastic covers under the glass and the rear view mirror (disconnect the wiring!).
- Using a knife or string, carefully cut through the old glue around the perimeter. Start from the top corner.
- Using suction cups, remove the glass (better with an assistant - it is heavy!).
- Clean the opening from any glue residue with a scraper and degrease the surface.
- Apply primer to the body and new glass (along the edge where the glue will be).
- Apply sealant to the opening or glass (depending on the type of adhesive) and install the glass, pressing evenly.
- Secure the glass with tape or special fasteners for 1–2 hours (the setting time is indicated on the glue tube).
⚠️ Attention: After replacement do not wash the car or open the doors from the glass side for 24 hours - this may break the seal. Also avoid sudden changes in temperature (for example, do not park your car in a heated garage immediately after a frost).
Before applying the glue, warm the tube in warm water (no higher than 40°C) - this will make it lie smoother and set faster.
Common replacement mistakes and how to avoid them
Even experienced craftsmen sometimes make mistakes that lead to leaks or squeaks. Here are the most common:
- 🚫 Savings on glue: Cheap sealant loses elasticity after a year or two, which leads to glass peeling.
- 🧴 Improper surface preparation: If you don't remove the old adhesive or degrease the metal, the new glass won't stick properly.
- ⏱️ Exposure time violation: If you start driving before the glue has completely dried (usually 24 hours), the glass may move.
- 🔊 Ignoring wiper adjustment: After installing the new glass, check whether the wipers are catching on the edge - this leads to scratches.
Another typical problem is glass creaking when driving. Most often it occurs due to:
- Insufficient amount of glue at the bottom (you need to apply a thick layer
5–7 mm). - Poor cleaning of the opening (sand or rust prevents a tight fit).
- Using low-quality suction cups that leave microcracks.
If a squeak appears, try processing the joint silicone grease (For example, WD-40 Specialist). If it doesn’t help, you’ll have to re-glue it.
Cost of replacement in the service vs on your own
Windshield replacement cost X-Trail T31 varies depending on region and type of glass:
| Glass type | Self-replacement (RUB) | Service replacement (RUB) |
|---|---|---|
| Original (NSG) | 25,000–35,000 (materials) | 35,000–50,000 (with work) |
| Analogue (Saint-Gobain) | 18,000–22,000 (materials) | 25,000–35,000 (with work) |
| Budget analogue (XYG) | 8,000–12,000 (materials) | 15,000–20,000 (with work) |
The cost of service work usually includes:
- 🔧 Dismantling old glass and preparing the opening.
- 🧪 Applying primer and sealant.
- ⏳ Exposure under pressure (1–2 hours).
- 🚗 Checking the tightness (test with water under pressure).
Replacing it yourself is more profitable, but only if you have the experience and tools. Otherwise, the risk of error (and additional costs) is too great.
Saving on sealant or glue will result in leaks and body corrosion. It’s better to pay once for a quality replacement than to redo it a year later.
What to do if the glass is cracked: temporary measures
If a crack appears on the glass, but it is not possible to replace it right now, you can slow down its spread:
- 🛑 Seal the chip immediately transparent tape (to prevent dirt or moisture from getting in).
- 🌡️ Avoid temperature changes: Do not wash your car with hot water in winter, do not park it in the sun in summer.
- 🚗 Drive more carefully: the crack may spread further due to vibration (for example, on bumps or during sudden braking).
- 🔧 Use polymer glue (For example, Permatex Windshield Repair Kit) for temporary repairs.
⚠️ Attention: If the crack is longer 10 cm or comes from the edge of the glass - there is no point in repairing it. In this case, only replacement.
Remember: even a small chip will eventually turn into a long crack due to vibrations and temperature changes. If the glass is cracked along the driver's line of sight, drive with it unsafe - it can distort the view or dazzle with glare.
FAQ: Frequently asked questions about windshields Nissan X-Trail T31
Is it possible to supply glass from X-Trail T32 on T31?
No, the sizes and shapes of the glasses are different. T32 (2014–present) has a more sloping windshield shape, and it will not physically fit into the opening T31.
What glue is best to use for replacement?
We recommend Dow Automotive Betaseal 1527 or SikaTack Drive — they are certified for auto glass and can withstand Russian frosts. Cheap analogues (such as Abro) often leak after a year.
How long does it take to replace glass?
The service time is about 2–3 hours (including the glue setting time). If you replace it yourself, it can take up to 4–5 hours if you do everything carefully.
Is it possible to drive with a cracked glass?
Technically possible, but unsafe. A crack impairs visibility, and in the event of an accident, the glass can crumble. According to the traffic regulations (clause 4.3 "List of faults") this is the basis for a fine.
How to check if the glass is original?
On original glass Nissan X-Trail T31 should be:
- Logo NSG or Pilkingtons in the corner.
- Article (
28060-JM00Aor28060-JM01A). - Production date (month/year).
- Certificate ECE R43 (marking in a circle).
If something is missing, it's a fake.