<em>Nissan Bluebird Sylphy</em>wiper sizes: selection by year and generation

Nissan Bluebird Sylphy is a popular sedan that has gained trust due to its reliability and comfort. But even the most reliable car requires regular maintenance, and replacing windshield wipers is one of those simple but important procedures that is often put off until later. Poorly functioning windshield wipers not only cause annoying squeaking, but also impair visibility in rain or snow, creating a real safety hazard. In this article we will figure out what sizes of wipers are suitable for B17, G11 and other generations Sylphy, how to choose them correctly and what to look for when buying.

Let us note right away: the sizes of the brushes may differ even within the same generation - it all depends on the configuration and the sales market (for example, Japanese and European versions sometimes have different wiper lengths). Therefore, before purchasing, it is important to check the technical documentation or measure the old brushes. We have collected current data on all modifications, including rare variants, so you don’t have to guess at the tea leaves.

Official sizes of wipers by generation Nissan Bluebird Sylphy

Wiper sizes for Sylphy vary depending on the year of manufacture and body style. Below is a table with official data from the manufacturer, confirmed by service manuals. Please note: in some cases, deviations of ±2 cm are possible - this is due to the characteristics of the fastenings or the design of the windshield.

Generation/Years	Body	Driver's wiper (cm)	Passenger wiper (cm)	Rear wiper (cm)
B17 (2012–2020)	Sedan	60	45	—
G11 (2005–2012)	Sedan	55	40	—
B13 (1997–2000)	Sedan/Wagon	53	38	30 (station wagon only)
U14 (1990–1997)	Sedan	50	35	—
Sylphy Classic (China) (2008–2017)	Sedan	62	48	—

⚠️ Attention: For models B17 after the 2016 restyling (with a redesigned windshield), sometimes long wipers were installed 62 cm (driver) And 47 cm (passenger). This applies to cars assembled for the Asian market. To avoid mistakes, check the markings on old brushes or measure them with a tape measure.

If your Sylphy equipped with a system Intelligent Auto Headlights (automatic headlights), most likely you have oversized wipers - this is due to the rain sensors located in the wiper operating area.

Mount types: which one is right for yours? Nissan Bluebird Sylphy?

Even if you get the right size, the wipers may not fit due to incompatible mounting. U Sylphy There are three main types used:

• 🔧 Hook (U-shaped) - the most common option for B17 And G11. Easily identified by the curved metal hook that hooks onto the wiper arm.
• 🔳 Bayonet (bayonet) - found on older models (U14, B13). The mount is fixed by turning the brush 90°.
• 🔄 Push Button - used on restyled versions B17 (after 2018). The brush is fixed by pressing the button on the side.

To determine the type of fastening, just remove the old wiper and look at its base. If in doubt, take the brush with you to the store - consultants will help you choose a compatible model. Also pay attention to the presence of adapters in the kit: many universal wipers (for example, Bosch Aerotwin or Denso Hybrid) are supplied with a set of adapters.

💡 Helpful tip: If you buy wipers online, look for the note “Compatible with Nissan Sylphy B17/G11" This ensures that the mount and size will fit without modification.

How to measure wipers yourself: step-by-step instructions

Not sure about the size? You can measure the brushes without dismantling them - just arm yourself with a tape measure or ruler. Here's how to do it right:

1. Raise the wiper arm perpendicular to the windshield (don't forget to turn off the ignition!).
2. Measure the length of the rubber part of the brush from one edge to the other excluding plastic case.
3. Round the result to the nearest standard size (e.g. 58 cm → 60 cm).
4. Repeat the procedure for the passenger brush.

⚠️ Attention: Do not measure the wiper along the curve! The rubber must be straightened, otherwise the result will not be accurate. Also keep in mind that some brushes have asymmetrical shape — for example, the driver’s license may be longer on one side.

Make sure that the dimensions match the table|Check the type of fastening (Hook/Bayonet/Push Button)|Assess the condition of the levers (is there any rust or play)|Select a material (rubber, silicone or hybrid)|Take into account climatic conditions (silicone is better for frosts)-->

If you live in an area with frequent rainfall or frost, pay attention to winter wipers. They have a protective cover to prevent icing and are usually 2–3 cm shorter than standard ones. For example, for B17 winter brushes can be 58 cm (driver) And 43 cm (passenger).

The best wiper brands for Nissan Bluebird Sylphy: what to choose?

The quality of wipers directly affects their service life and cleaning efficiency. Here is a rating of trusted manufacturers whose brushes are ideal for Sylphy:

• 🏆 Nissan Original — original wipers, guaranteed to be compatible in size and mounting. Disadvantage: high price (from 1,500 ₽ per set).
• 🌟 Bosch Aerotwin — frameless brushes with an aerodynamic profile. They cope well with heavy rain, but can freeze in winter.
• ❄️ Denso Hybrid — hybrid wipers with graphite coating. Optimal for cold climates, lasts up to 2 years.
• 💰 Champion EasyVision - a budget option (from 600 ₽) with good cleaning, but a shorter resource (about 6 months).
• 🛡️ Valeo Silencio — premium brushes with reduced noise levels. Suitable for B17 with the system ProPILOT (do not interfere with the operation of the sensors).

Critical: For models Sylphy with cameras Around View Monitor (all-round view) you cannot use wipers with a metal frame - they interfere with the sensors. In this case, only suitable frameless or hybrid brushes

If you often drive on the highway, choose wipers with spoiler (For example, Bosch Eco or Hella OptiFit). They press against the glass better at high speeds and do not “bounce” in gusts of wind.

When to change wipers: 5 signs of wear

Many drivers wait until the wipers stop cleaning the glass completely, but this is dangerous. Here are the signals that it's time to replace your windshield wipers. Nissan Bluebird Sylphy:

• 💧 Stripes on glass — the rubber has lost its elasticity and does not fit tightly.
• 🔊 Creaking or knocking during operation - a sign of wear of the graphite coating or deformation of the frame.
• 🌫️ Stain after rain — brushes cannot cope with cleaning due to dried dirt or cracks in the rubber.
• 🧊 Icing in winter — standard wipers are not designed for frosts below –15°C.
• 🔄 Uneven movement — the wiper arm “sticks” due to rust or wear on the hinges.

Average brush life - 6–12 months, but it is reduced if:

• The car is often parked outdoors (UV rays destroy rubber).
• You use your windshield wipers to clear snow or ice (this ruins the blade).
• Chemical reagents remain on the glass (for example, after washing).

💡 Helpful tip: Before winter, treat the wiper rubber with silicone lubricant (for example, WD-40 Specialist). This will prevent cracking and extend service life by 20-30%.

Step-by-step replacement of wipers Nissan Bluebird Sylphy: instructions

You can replace windshield wiper blades yourself in 5–10 minutes. All you need are new wipers and a flathead screwdriver (for some types of mounts). Follow the algorithm:

1. Raise the wiper arm to the vertical position (do not force it - if it does not lift, turn the ignition on and press the wiper button for 1 second to reset).
2. Press the fastening latch (for Hook - bend the metal hook to Push Button — press the button on the side).
3. Remove the old brush by pulling it down. If the fastener is rusty, treat it with a penetrating lubricant (Liqui Moly Rostloser).
4. Install the new brush, aligning the mount with the lever. For Bayonet turn it until it clicks.
5. Lower the lever onto the glass and check the operation of the wipers in different modes.

⚠️ Attention: Never operate the windshield wipers with the arms raised! This may damage the motor or bend the mechanism. If you accidentally turn on the wipers without blades, immediately turn off the ignition and manually return the levers to their original position.

What to do if the wipers work asynchronously?

If after replacement the brushes move at different speeds or “stick”, the problem may be:

1) Wear of the windshield wiper trapezoid (requires replacement of the mechanism).

2) Oxidation of motor contacts (you need to clean the terminals).

3) Incorrect installation of brushes (check if you have mixed up the driver's and passenger's).

The service diagnostics will cost 500–1,000 rubles, but sometimes a simple adjustment of the levers (tighten the fastening nuts) helps.

If streaks remain after replacement, check:

• 🔹 Cleanliness of the windshield (sometimes it’s not the wipers that are to blame, but greasy spots).
• 🔹 The angle of the brush - it should be adjacent to the glass at a right angle.
• 🔹 The condition of the rubber seals on the levers (if they are worn out, water gets into the mechanism).

Common mistakes when choosing and replacing wipers

Even experienced drivers sometimes make mistakes that lead to rapid wear of the blades or damage to the glass. That's what it's impossible do:

• ❌ Install wipers longer than recommended - they will cling to the edge of the glass and leave uncleaned areas.
• ❌ Use used brushes — rubber loses its elasticity and can scratch the glass.
• ❌ Buy wipers without taking into account climate - for example, summer brushes will ice up in winter.
• ❌ Ignore lever condition - rust or play will lead to uneven pressure on the glass.
• ❌ Clean glass detergents with abrasives (for example, powders) - they destroy the rubber of the wipers.

Another common mistake is skimping on quality. Wipers costing 200–300 rubles will last a couple of months at most, but cheap rubber quickly dulls and scratches the glass. As a result, you will have to spend money on polishing or even replacing the windshield, which will cost tens of times more.

FAQ: Answers to popular questions

Is it possible to install wipers of a different length if the original ones are not on sale?

A deviation of ±2 cm is allowed, but no more. For example, instead of 60 cm you can put 58 or 62 cm. However, please note:

• Longer blades may touch the body pillars or the edge of the glass.
• Short wipers will leave unwiped areas, which will impair visibility.

It is better to wait for the original sizes or order them through an official dealer Nissan.

How often should wipers be changed? Sylphy?

Recommended interval - once a year or every 15,000 km. However, under conditions:

• Frequent rain or snow - every 6-8 months.
• Extreme temperatures (heat/frost) - once every 9 months.
• Open-air parking - once every 10 months (UV rays destroy rubber).

Check the condition of the brushes every 3 months - it will take a minute, but will save nerves and money.

Will wipers fit Nissan Almera or Sentra on Sylphy?

Partially. For example, for B17 Sylphy And Almera N18 (2019–2023) dimensions are the same (60/45 cm), but fastenings may differ. U Sentra B17 (for the American market) wipers are the same as those Sylphy, but with a different bend angle of the lever. Before purchasing, please check:

• Mounting type (Hook or Push Button).
• Adapters included.
• Year of manufacture - after restyling 2018 Sylphy got new levers.

What to do if new wipers squeak?

The creaking occurs due to:

1. Incorrect installation — check whether the brush fits tightly to the lever.
2. Glass contamination - wash it with car shampoo and wipe with a lint-free cloth.
3. Low quality rubber — cheap wipers often squeak during the first 1–2 weeks.
4. Blade dryness - Apply silicone grease to the rubber part.

If the squeaking does not go away after a week, return the brushes under warranty - this is a defect.

Is it possible to restore old wipers?

Yes, but this is a temporary solution. Methods:

• 🧼 Cleaning: Wash the brushes in warm water and soap, removing dirt from the grooves.
• 🔥 Sanding: Carefully walk the scratch pad along the edge of the rubber (only for frame wipers!).
• 🛢️ Lubrication: Apply glycerin or special conditioner for wipers to the gum (Sonax Glass Cleaner).

These methods will extend the life of the brushes by 1-2 months, but will not replace a full replacement.