Low visibility on the road is one of the main causes of accidents in rainy or snowy weather. For owners Nissan Almera generation G15, which are often operated in the harsh Russian climate, the proper operation of the glass cleaning system becomes a matter of safety, and not just comfort. Many car owners mistakenly believe that it is enough to buy any long brushes to improve visibility, but this is a fundamental mistake that leads to drive failure.
Sedan owners Nissan Almera (G11, restyling G15) are faced with the need to select specific sizes, since the factory equipment may vary depending on the year of manufacture and the sales market. An incorrect choice of length leads to the fact that the blades hit each other, do not clean the corners of the windshield, or, conversely, touch the hood and glass frames, causing vibration and noise.
In this article we will analyze in detail the official dimensions, acceptable analogues and installation nuances. You will only need to compare the data with your car and select the appropriate option from the proposed brands. Ignoring the manufacturer's recommendations can lead to accelerated wear of the rubber and damage to the wiper arms.
Official wiper sizes for Nissan Almera G15
Factory equipment of the car Nissan Almera G15 involves the use of two different size blades on the front glass and one on the rear. The standard configuration for most markets, including Russia, is as follows: the driver's side gets a longer brush, and the passenger's side gets a shorter one. This is due to the design of the trapezoid of the wiper and the curvature of the glass.
For front glass Nissan Almera G15 brushes are standardly installed length 600 mm (24 inch) driver side and 400 mm (16 in.) passenger side. This asymmetry allows for maximum efficiency in cleaning a large area of the windshield with a minimum number of dead spots. The rear window can be cleaned with one brush length 300 mm (12 inches), which has a specific bend to work along the radius of the rear window.
It is important to consider that in some configurations, especially early years of production or for southern markets, deviations of 10-20 mm may occur. For example, a brush is sometimes placed on the passenger side 450 mm (18 inches). It is critical to check the length of the old brush before purchasing, as the previous owner may have installed non-standard dimensions. If you are not sure of the exact parameters, it is best to remove the old brush and measure its metal frame or elastic band with a ruler.
⚠️ Attention: Installing 650 mm long blades on the driver's side is strictly not recommended, as they will touch the windshield pillar and can break the lever when operating at high speed.
- Driver's side: 600 mm (24 in)
- Passenger side: 400 mm (16 in) or 450 mm (18 in)
- Rear window: 300 mm (12 inches)
Usage frameless brushes is the most preferred option for Nissan Almera G15. They provide a better fit to curved glass, are less susceptible to icing in winter and look more aesthetically pleasing. However, when switching from framed to frameless models, you need to make sure that the transition mounts are compatible.
Mount types and adapter compatibility
Many car owners are faced with the problem of incompatibility when purchasing universal brushes. Standard mount on Nissan Almera G15 is a type Hook (hook). This is the most common type of fastening in the world and has been used on most cars since the late 90s. It is a simple metal hook at the end of the windshield wiper arm into which the blade loop hooks.
When choosing brushes, pay attention to the adapters included. Most quality brands supply a set of adapters, but for the type Hook Often adapters are not required at all, since the brush is attached directly. However, some frameless models require the installation of a plastic retainer that snaps onto the hook to prevent slipping.
If you plan to use frame brushes, make sure they have a universal adapter or are specifically designed for a Hook mount. Incorrect installation can cause the brush to fly off while driving, which is dangerous for both you and other road users.
- Main type of fastening: Hook (Hook / U-Hook)
- Alternate types (rare): Side pin, Bayonet (rare for G15)
- Recommended construction type: Frameless (Flat / Aero)
In some cases, especially when purchasing cheap analogues, the adapter may be fragile. It is recommended to check its reliability before installation. If an adapter is included, choose one that is marked or shaped to match the type of hook on your vehicle.
- Frame
- Frameless
- Hybrid
- I don't know
How to properly remove and install wipers
The process of replacing brushes Nissan Almera G15 does not require special tools and can be done independently in 10-15 minutes. The main rule is to act carefully so as not to hit the glass with the windshield wiper lever. If the arm hits the glass without a blade, it can cause a crack or chip, which will cost much more than new wipers to repair.
To remove the old blade, lift the windshield wiper arm to the vertical position. Turn the brush perpendicular to the lever. You will see a locking button or latch at the connection point. Press this button and, while holding it, pull the brush down to release it from the hook of the lever.
Installing a new brush is done in reverse order. Place the loop of the new brush onto the hook of the lever. Listen for a characteristic click, which will confirm reliable fixation. Lower the lever onto the glass smoothly, holding it with your hand to avoid impact. Before starting work, be sure to check the condition of the rubber bands. and the presence of ice in the mechanism.
☑️ Preparing to replace wipers
Pay special attention to the rear windshield wiper. On Nissan Almera it is attached slightly differently, often using a plastic cover that needs to be carefully pryed off. Remove the cover, unscrew the nut (if there is one) or simply remove the lever if it is latched, and replace the brush.
⚠️ Caution: Never operate the windshield wipers while the arms are in a vertical position, as this may cause the trapezoid mechanism to break.