Nissan Laurel C35 is a legendary Japanese sedan that is still popular among car enthusiasts due to its reliability, comfort and stylish design. However, when replacing wheels, owners are often faced with the question: what is the bolt pattern of this model? Errors in the selection of discs can lead to vibrations, premature wear of wheel bearings or even accidents. In this article we will look at all the technical nuances of bolt pattern Laurel C35, compatible with drives from other models Nissan, and also give practical recommendations on choosing tires and wheel spacers.

Feature Laurel C35 (1997–2002 production) is that its wheel parameters depend on the configuration and sales market. For example, Japanese versions may differ from European or American versions. We analyzed factory manuals, parts catalogs and owner reviews to provide accurate data. If you are planning tuning or simply replacing worn out discs, this information will help you avoid costly mistakes.

What is bolt pattern and why is it important for Nissan Laurel C35

Bolt pattern (or PCD - Pitch Circle Diameter) is the diameter of the circle on which the holes for attaching the disc to the hub are located. For Laurel C35 this parameter is critical, since incorrect selection can lead to:

  • 🔧 Uneven tightening of bolts - the disc will “walk” on the hub, which will cause the steering wheel to wobble.
  • 🚗 Premature wear suspension and transmission due to imbalance.
  • ⚠️ Unscrewing the wheels while driving (in extreme cases).

Except PCD, when selecting disks, take into account:

  • 📏 ET (departure) — the distance from the mating plane of the disk to its center. For Laurel C35 factory offset is usually +35…+45 mm.
  • ⭕ DIA (center hole diameter) - must match the diameter of the hub or be larger (using adapter rings).
  • 🔩 Type of mounting bolts - for C35 this is usually M12×1.25.

Many owners mistakenly believe that if the disc physically fits on the hub, then it fits. However, even the slightest discrepancy PCD (For example, 114.3 mm instead of 114 mm) will lead to the fact that only 3-4 bolts out of 5 will be tightened correctly, and the fifth will be skewed. This is fraught high speed emergency.

📊 How often do you change the wheels on your car?
  • Every season
  • Once every 2-3 years
  • Only if damaged
  • Never changed

Factory bolt pattern settings Nissan Laurel C35 (1997–2002)

Official data for Laurel C35 (including modifications with engines RB20E, RB25E, RB25DE And RB25DET):

Parameter Meaning Note
PCD (bolt pattern) 5×114.3 mm Standard for most Japanese sedans Nissan 90s
ET (departure) +35…+45 mm Depends on the width of the disk. For disks 7J usually +40 mm.
DIA (center hole) 66.1 mm May vary depending on year of manufacture.
Bolt thread M12×1.25 Bolt length - 27–30 mm.
Recommended tire size 205/60 R16 or 215/50 R17 For tuning, options up to 235/40 R18.

Important: on some export versions (for example, for the Middle East) it could be installed PCD 5×112. Before purchasing disks, be sure to check the parameters of your model according to VIN code or measure the bolt pattern yourself.

⚠️ Attention: If you buy used wheels, check them for runout and deformation. Even minimal curvature (0.5 mm) will lead to vibrations at speeds higher 80 km/h.

How to measure the bolt pattern yourself Nissan Laurel C35

If you do not have access to technical documentation, you can measure PCD manually. You will need:

  • 📏 Caliper or ruler.
  • 🔧 Wheel loosening key.
  • 📐 Square (for accuracy).

Method 1: Measure between adjacent bolts

For 5-hole discs (like Laurel C35) use the formula:

PCD = расстояние между центрами соседних болтов × 1.051

For example, if between the bolts 60 mm, then PCD = 60 × 1.051 ≈ 63.06 mm. But since C35 bolt pattern 114.3 mm, this method is only suitable for checking, not for precise measurement.

Method 2: Measure from edge to edge

  1. Measure the distance between the outer edges of two opposite holes (L).
  2. Measure the hole diameter (D).
  3. Substitute into the formula: PCD = L – D.

Remove the wheel and clean the hub from dirt

Measure the distance between the centers of adjacent bolts

Check Center Hole Diameter (DIA)

Compare the data with the compatibility table-->

If you are not sure of the accuracy of the measurements, contact a tire shop - they have special templates for determining PCD.

Disc compatibility with other models Nissan And Infiniti

Discs from the following models are suitable for Laurel C35 without modifications (if there is a match ET And DIA):

  • 🚘 Nissan Skyline R33/R34 (except versions with PCD 5×112).
  • 🚗 Nissan Cedric/Gloria Y33 (1995–1999).
  • 🏎️ Nissan Stagea WC34 (station wagon based on Skyline).
  • 💎 Infiniti I30 (American version Cedric).

Also suitable for discs from:

  • 🔄 Mitsubishi Galant VR-4 (some versions).
  • 🔧 Subaru Legacy (only with PCD 5×114.3).

However, there are nuances:

  • Discs from Skyline GT-R (For example, BBS LM) may have overhang ET20–30, which will require the use of spacers.
  • Central hole Infiniti often more (73.1 mm), so centering rings are needed.
⚠️ Attention: Discs from Nissan 350Z or 370Z have PCD 5×114.3, but their ET usually lower (+15…+25 mm), which will lead to protruding wheels and increased load on the wheel bearings.
Which wheels are NOT suitable for Laurel C35

Wheels from Nissan Primera P11/P12 (PCD 4×114.3) - different number of holes.

Wheels from Toyota Chaser/Cresta (PCD 5x114.3, but DIA 60.1 mm) - the central hole does not match.

Wheels from Honda Accord (PCD 5x114.3, but ET often +50...+60 mm) - too much offset.

Selection of tires for Nissan Laurel C35: sizes and recommendations

Factory tire sizes for Laurel C35:

  • 205/60 R16 - the most common option for standard disks 7J.
  • 215/50 R17 - for disks 7.5J–8J (often installed on versions with RB25DET).

When tuning, the following options are possible:

Disk size Recommended tire size Notes
17×8J ET35 225/45 R17 Arches may need to be rolled out.
18×8.5J ET30 235/40 R18 Only for versions with lowered suspension.
16×7J ET40 205/65 R16 To increase ground clearance (for example, for winter use).

When choosing tires, consider:

  • 🌡️ Speed index - for RB25DET recommended V (240 km/h) or W (270 km/h).
  • ❄️ Load Index - not lower 91T for standard versions and 94V for turbo modifications.
  • 🔄 Direction of the drawing - asymmetrical or directional tires improve handling.
💡

When purchasing tires for the Laurel C35 with the RB25DET engine, give preference to models with reinforced cords (for example, Michelin Pilot Sport 4 or Yokohama Advan Sport). This will reduce the risk of tire explosion under high loads.

Common mistakes when selecting disks and how to avoid them

Even experienced car owners sometimes make mistakes. Here are the most common:

  1. Ignoring crash (ET) - installation of disks with ET20 instead of ET40 moves the wheel outward, resulting in:
    • ⚡ Accelerated wear of wheel bearings.
    • ⚠️ Touching the arches when fully loaded.

Solution: Use spacers only as a last resort and do not exceed the total offset by more than ±10 mm from factory.

  1. Mismatch DIA - if the central hole of the disk is larger than the hub, but you do not use centering rings, the disk will “walk” even with the correct bolt pattern.

Solution: Buy aluminum or plastic rings with precision ±0.1 mm.

  1. Saving on bolts — the use of old or cheap bolts leads to their breakage or thread failure.

Solution: Change bolts every 50,000 km or every second tire change. The best choice is bolts ARP or Muteki.

💡

The most dangerous mistake is installing disks with PCD 5x112 instead of 5x114.3. Outwardly, they may seem compatible, but as you move, the bolts will gradually unscrew due to uneven load.

Tuning and non-standard solutions for Laurel C35

If you are planning on tuning, here are some proven options:

  • 🔥 Discs Work Emotion CR Kiwami 18×9.5J ET22 - Popular choice for style VIP. Spacers required 15–20 mm and rolling out the arches.
  • ⚡ Discs BBS LM The 17x8J ET30 is lightweight and durable, ideal for track days.
  • ❄️ Winter kit for 16×7J ET40 - tires 205/65 R16 with Velcro (for example, Bridgestone Blizzak).

When tuning the suspension (lowering), consider:

  • Minimum ground clearance for Laurel C35 — 100 mm (otherwise there will be contact with the thresholds).
  • When installing disks wider 9J You will need widened arches or negative camber rollers.

For owners RB25DET disks with high heat transfer are relevant (for example, Enkei RPF1), since standard ones are easily deformed during aggressive driving.

FAQ: Frequently asked questions about bolt pattern Nissan Laurel C35

Is it possible to install wheels from a Nissan 350Z on a Laurel C35?

Theoretically yes, since they have the same PCD 5×114.3. However:

  • Departure at 350Z usually +15…+25 mm, which will require spacers.
  • Central hole 66.1 mm matches, but the width of the rims is often 8.5J–9.5J, which can lead to friction against the arches.

Recommendation: Use spacers 15–20 mm and check the clearances when fully loaded.

What bolts are needed for wheels with spacers?

When using spacers thicker than 10 mm standard bolts M12×1.25 will be short. Extended bolts required:

  • For spacers 15 mm - bolts length 40–45 mm.
  • For spacers 25 mm - bolts length 50–55 mm.

Important: Use bolts with cone fit (For example, Muteki SR48).

What is the maximum size of disks that can be installed without modifications?

Without rolling out the arches or changing the suspension:

  • 18×8.5J ET35 with tires 235/40 R18.
  • 17×9J ET30 with tires 245/40 R17 (slight bumping is possible when fully loaded).

For larger sizes you will need:

  • Rolling out the front/rear arches.
  • Installation of camber rollers (-1.5°…-2.5°).
Can I use wheels from Toyota Mark II (JZX100)?

No, despite the external resemblance:

  • Mark II has PCD 5×114.3, but DIA 60.1 mm (against 66.1 mm at Laurel).
  • Departure at JZX100 often +35…+40 mm, but the central hole will not match without modifications.

Alternative: Discs from Nissan Skyline R33 (For example, BBS RS) will fit without problems.

Which tires are best for the Laurel C35 with RB20E engine?

For atmospheric RB20E (150 hp) suitable:

  • Summer: Michelin Primacy 4 (205/60 R16) - the optimal ratio of price and comfort.
  • Winter: Nokian Hakkapeliitta R3 (205/65 R16) - soft, work well in the snow.

For a sportier driving style:

  • Yokohama Advan Sport V105 (215/50 R17) - improved handling on dry asphalt.