Many crossover owners, when choosing a car, pay close attention to the parameters of the cargo compartment, since the practical use of the car in everyday life depends on it. For model Nissan Qashqai second generation, known under the index J11, this question is especially acute, given the positioning of the car as a compact but roomy urban SUV. The volume indicators and geometry of the compartment directly affect the ability to transport large cargo, from strollers to building materials.
In technical documentation and during actual use, parameters may differ depending on the configuration and type of drive. It is important to understand that the figures declared by the manufacturer are often calculated according to the VDA standard, which assumes dense packing of boxes of a certain size, while in reality the shape of the trunk may have its own characteristics. Analyzing the nuances will help you make the most of the space in your Nissan Qashqai J11.
Basic capacity figures in standard configuration
The main characteristic of the luggage compartment is its volume in liters, which depends on the position of the rear seats and the presence of a spare wheel under the floor. For the front-wheel drive version, this figure is maximum, since there are no additional transmission elements in the rear that take up useful space. The standard volume is 430 liters, which is an excellent result for the compact crossover segment.
If we consider the version with all-wheel drive 4x4, then the volume is reduced to 410 liters. This is due to the installation of a rear gearbox and driveshaft, which take up about 20 liters of usable space. Although the difference may seem small, when transporting large items such as a large stroller or several bulky suitcases, these liters can make a difference.
- π Front wheel drive: 430 liters to the top edge of the seats.
- π Four-wheel drive: 410 liters due to the presence of a rear gearbox.
- π Volume up to the ceiling: increases to 1585 liters with seats folded.
It is important to note that the trunk floor has adjustable height. In the raised position, it is at the level of the cabin floor, which is convenient for transporting small items so that they do not slip. However, this reduces the height of the compartment itself, which may limit the ability to install tall objects.
β οΈ Attention: When buying a used car, be sure to check the condition of the trunk floor for hidden damage after an accident, as the geometry of the compartment may have been damaged.
Influence of chassis and configuration on dimensions
Suspension design and transmission type have a significant impact on the interior geometry of the trunk. Owners of all-wheel drive versions often notice that the rear gearbox creates a noticeable protrusion in the floor, which divides the space into two unequal parts. This protrusion cannot simply be removed, since it is a structural element of the system 4x4.
In addition, the presence of a spare tire (full-size or temporary "storage") under the trunk floor also reduces the available volume. In some trim levels, a puncture repair kit is installed instead of a spare wheel, which allows you to lower the floor and increase the depth of the compartment. This is critical for those who regularly transport bulky loads but do not have the ability to carry a spare tire.
To accurately understand the capabilities of your vehicle, the following technical parameters must be taken into account:
| Parameter | Value (l) | Note |
|---|---|---|
| Volume (FWD) | 430 | To the edge of the seats, without spare wheel |
| Volume (AWD) | 410 | Including gearbox |
| Depth to ceiling | 1585 | With seats folded |
| Opening width | ~1000 | Between the wheel arches |
The opening width between the wheel arches is about 1000 mm, which allows you to load fairly wide items, such as prams or long boxes. However, the opening height is limited by the structure of the roof and rear door.
- Front (FWD)
- Full (4x4)
- I don't know/Haven't watched
- Planning a purchase
Interior transformation and maximum volume
One of the key features Nissan Qashqai J11 is the possibility of transforming the rear row of seats. Depending on the configuration, the backs of the rear sofas can be folded in a proportion of 60/40 or 40/20/40. This allows flexible management of space without completely sacrificing space for passengers.
With the seats folded down, the trunk floor becomes almost flat, although there is still a slight slope. The total length of the cargo compartment increases to 1700-1800 mm, which allows you to transport long items such as skis, boards or furniture. However, it is worth considering that when the seats are folded, the cargo height is limited by the roof line.
- π Proportion 60/40: allows you to fold one half of the sofa, leaving space for passengers.
- π Proportion 40/20/40: Provides maximum flexibility for transporting narrow, long loads.
- π Flat floor: achieved by adjusting the height of the headrests and the folding mechanism.
The folding mechanism is often equipped with buttons located directly in the luggage compartment. This eliminates the need to climb into the cabin or open doors to fold down the seats. Some trim levels include a mechanism that allows the seats to be folded using levers on the backrests.
βοΈ Transformation check
β οΈ Attention: Before transporting long loads, make sure that the seat backs are fully secured in the lower position to avoid the load shifting during sudden braking.
Opening geometry and ease of loading
The ease of use of the trunk is determined not only by the volume, but also by the geometry of the opening. Threshold height Nissan Qashqai J11 quite high, which is typical for crossovers with high ground clearance. This creates additional inconvenience when loading heavy objects, since they have to be lifted to a considerable height.
The width of the opening allows you to easily load most standard items, but very wide furniture may require tilting. The rear door opens to an angle of about 80 degrees, providing good access to the interior. At the same time, the height of the door is limited by the roof, which may be inconvenient for tall people.
It is important to consider the length of the opening. When the door is open, the rear bumper does not interfere with loading, but you should be careful when parking on uneven surfaces so that the door does not hit an obstacle.