Fog lights (PTF) on Nissan Sunny: complete selection and installation guide

Fog lights on Nissan Sunny - this is not just a tuning element, but an important safety component, especially in poor visibility conditions. Owners of this Japanese sedan are often faced with a dilemma: which PTFs to choose, how to install and connect them correctly so as not to disrupt the car’s electrical system. Unlike newer models Nissan, where fog lights come as standard, Sunny (especially releases before 2015) are often deprived of this useful accessory.

In this article we will analyze all the nuances: from the selection of certified PTFs to step-by-step installation instructions, taking into account the features of the electrical circuit Nissan Sunny B15/B16/B17. You will learn what mistakes lead to blown fuses, how to avoid corrosion of fasteners, and why cheap Chinese headlights can blind oncoming drivers. And also - unique data on the compatibility of PTF with different generations of Sunny, which is not in the official manuals.

Which fog lights are suitable for Nissan Sunny?

Selecting PTF for Sunny depends on the year of manufacture, body modification and even the market for the car. For example, European versions Nissan Almera Classic (similar to Sunny) are often equipped with standard seats for PTF, while Asian models require modifications. Here are the key selection criteria:

• 🔹 Base type: lamps suitable for Sunny H11, H8 or HB4 (depending on the headlight model). European standards require yellow light (color temperature ~3000K), but in Russia white LED analogues are often installed.
• 🔹 Form factor: oval PTF (for example, HELLA Micro DE) are universal, but rectangular models with mounting under the bumper are better suited for the Sunny B16.
• 🔹 Certification: look for markings ECE R19 or SAE. Headlights without a certificate may not pass inspection.
• 🔹 Housing material: plastic is cheaper, but metal PTF (for example, Bosch F3) last longer in Russian winter conditions.

Please note seat size: For Sunny B15, headlights with a diameter of 75–90 mm are suitable, and for B17 - up to 100 mm. If you plan to install PTF in the bumper, check in advance for the presence of standard mounting holes. Some versions do not have them, and you will have to drill them.

Top 5 PTF models for Nissan Sunny: rating 2026

Based on reviews from owners and tests by independent experts, we have compiled a rating of the best fog lights for Sunny. The selection criteria were brightness, durability, ease of installation and price/quality ratio.

Model	Lamp type	Color temperature	Average price (pair)	Features
HELLA Micro DE	H11	3000K (yellow)	8 500 ₽	The best choice for European versions of Sunny. Vibration resistant, sealed housing.
Bosch F3	H8	3200K	7 200 ₽	Metal body, long service life. Suitable for B16/B17.
PIAA 510	HB4	4000K (white)	12 000 ₽	Premium segment. LED technology, high brightness. Wiring needs to be improved.
Koito Whitebeam III	H11	3000K	9 800 ₽	Japanese quality, optimal light beam. Ideal for Sunny B15.
Depo 335-1114L-AS	H8	2800K	4 500 ₽	Budget option. Suitable for tuning, but require frequent adjustment.

If you choose LED-PTF, pay attention to models with a built-in current stabilization driver (for example, Morimoto XB LED). They are more expensive, but do not flicker when the engine speed changes. We recommend lamps for halogen headlights Osram Night Breaker or Philips X-tremeVision - they provide 20–30% more light with the same energy consumption.

⚠️ Attention: Do not install xenon lamps in halogen PTFs! This violates GOST and can lead to blinding oncoming drivers. Xenon is allowed only in specially designed headlights with lenses and washers.

PTF connection diagrams for Nissan Sunny: step-by-step instructions

Connecting fog lights to Sunny can be done in two ways: through a standard button (if there is one) or by installing a separate switch. Let's consider both options.

Option 1: Connection via a standard button (for Sunny with pre-installed wiring)

If your Nissan Sunny equipped with a PTF button on the panel (usually next to the light switch), but the headlights themselves are not installed, follow this diagram:

1. Remove the front bumper (unscrew the bolts under the hood and in the wheel arches).
2. Find the standard connectors for the PTF - they are located behind the bumper, next to the fog holes.
3. Connect the headlights to the connectors, observing the polarity (+12V And mass).
4. Install the lamps and adjust the light beam (read below for how to do this).

If there are no connectors, you will have to pull the wires yourself. Use stranded copper wire with a cross section of at least 1.5 mm². For short circuit protection, install fuse 15A into the power circuit.

Option 2: Complete connection from scratch (for Sunny without standard wiring)

For cars without prepared electricians you will need:

• 🔧 Relay 4-pin (For example, 12V 30A).
• 🔧 Power button (can be installed on the panel or in the light control unit).
• 🔧 fuse at 15–20A.
• 🔧 Wires with a cross section of 1.5–2 mm².

Connection diagram:

Батарея (+12V) → Предохранитель → Реле (контакт 30) → ПТФ
Реле (контакт 85) → Масса
Реле (контакт 86) → Кнопка → Зажим "15" (зажигание)
Реле (контакт 87) → ПТФ (через выключатель)

For convenience, use male-female connectors - this will simplify the removal of headlights in the future. Be sure to insulate all connections with heat shrink tubing or electrical tape.

Wire polarity (plus/minus)

Insulation integrity

Reliability of ground wire fastening

Relay and fuse performance-->

Adjusting the PTF on a Nissan Sunny: how to avoid blinding oncoming drivers

Incorrectly adjusted fog lights are not only useless, but also dangerous. According to GOST R 51709-2001, the PTF light beam should illuminate the road at a distance of 10–20 meters in front of the car, without rising above the level of the headlights. For Nissan Sunny optimal parameters:

• 📏 Installation height: no higher than 50 cm from the road level.
• 📐 Tilt angle: 5–10° down (depending on mounting height).
• 🔄 Symmetry: light spots must match in height and width.

To adjust you will need flat area, a vertical wall (or garage door) and a tape measure. Algorithm of actions:

1. Park the car 5 meters from the wall.
2. Make marks on the wall corresponding to the centers of the headlights.
3. Turn on the PTF and adjust the fastening screws so that the upper limit of the light spot is 10 cm below the marks.

If you have LED-PTF, please note that their light beam is more directional, so the angle of inclination should be smaller (about 3–5°). To check, get behind the wheel and make sure that the light does not shine into the eyes of drivers of oncoming cars.

⚠️ Attention: After replacing bulbs or adjusting headlights, be sure to check the adjustment while driving! On an uneven road, the angle of light may shift.

Common mistakes when installing PTF on a Nissan Sunny and how to avoid them

Even experienced car owners make mistakes when installing fog lights. Here are the most common mistakes and ways to prevent them:

• ⚡ Short circuit: Occurs due to poor wire insulation or incorrect polarity connection. Always use heat shrink and check the circuit with a multimeter before final assembly.
• 💡 Lamp burnout: Often caused by power surges. Install voltage stabilizer (For example, Korad KA3005D) or use lamps with surge protection.
• 🔩 Fastening corrosion: if you do not treat metal parts with anticorrosive, the bolts may “stick” after a year. Apply WD-40 lubricant or Molykote on the thread before installation.
• 🔄 Incompatibility with on-board computer: on Sunny after 2010, when installing LED-PTF, an error may light up "Check Fog Lamp". Solved by installation kan emulator or ECU firmware.

Another typical problem is flickering LED-PTF when the engine is running. This is due to unstable voltage in the on-board network. Solution:

• Install capacitor parallel to the headlight power supply (capacitance 1000–2200 µF).
• Use LED drivers with wide input voltage range (For example, Mean Well LPC-35).

What should I do if the PTFs do not turn on after installation?

1. Check the fuse (usually F16 or F17 in the block under the hood).

2. Make sure that the mass is securely connected to the body (it is better to clean the mounting area to bare metal).

3. Test the relay with a multimeter - it should click when turned on.

4. If the problem is in the button, connect the headlights directly to the battery to check.

Legal aspects: is it possible to drive a Nissan Sunny with PTF without fines?

In Russia, the use of fog lights is regulated Traffic rules (clauses 19.4 and 19.7) And GOST R 51709-2001. Here are the key points an owner needs to know Nissan Sunny:

• 🚦 When can you turn on PTF?: only in conditions of poor visibility (fog, rain, snowfall) or at night along with low beam.
• 🔴 When not to: in clear weather during the day (fine 500 ₽ under Article 12.20 of the Administrative Code).
• 🟡 Color of light: Only white, yellow or orange PTFs are allowed. Blue, green or red are prohibited.
• 📏 Quantity and location: no more than 2 headlights installed no higher than the low beam headlights and no further than 40 cm from the side dimensions of the car.

If you are installing PTF non-standard sample (for example, round headlights on the bumper), the traffic police inspector may issue a fine for "inconsistency of the vehicle design" (Part 1 of Article 12.5 of the Administrative Code - 500 ₽). To avoid problems:

• Save the receipt for the purchase of certified PTFs.
• Make sure the headlights do not protrude beyond the bumper.
• When passing the technical inspection, present declaration of conformity (if PTF is not standard).

In some regions (for example, Moscow, St. Petersburg), inspectors are stricter when it comes to light tuning. If in doubt, consult your local traffic police department or a motor vehicle lawyer.

FAQ: Answers to frequently asked questions about PTF on Nissan Sunny

Is it possible to install PTF on Nissan Sunny B14 (1995–2000)?

Yes, but the bumper will need modification (drilling holes) and full wiring. For B14, oval PTFs with a diameter of 70–80 mm are suitable (for example, HELLA Micro FF75). Pay attention to the condition of the electrical wiring - on old Sunnys the contacts in the fuse box often burn out.

Which lamps are better for PTF: halogen, LED or xenon?

For most owners Sunny optimal choice - halogen lamps (For example, Osram Offroad). They are cheaper, easier to install and do not cause electrical problems. LED PTFs provide brighter light, but require wiring modifications and may flicker. Xenon in PTF prohibited (except for special lensed headlights).

What fuse is needed for PTF on Sunny?

For halogen PTFs, a fuse for 15A. If you are installing LEDs with a power of over 30 W, take 20A. The fuse should be located as close to the battery as possible (for example, in a block under the hood). Never use bugs - this may cause a fire!

Is it possible to connect PTF to parking lights or brake lights?

No! Connecting the PTF to other circuits (dimensions, stops, turn signals) violates Traffic rules and may cause wiring overload. PTF should be turned on only with a separate button or through a standard switch. If you want automation, use time relay (for example, to turn on PTF when starting the engine).

What to do if, after installing the PTF, the wipers stop working?

This is a common problem if the connection to the fuse box is incorrect. Most likely you touched the wiring wiper gear motor (fuse F10 at 25A). Check the circuit with a multimeter and restore the insulation. If the wipers work, but slowly, there may be a voltage drop due to thin wires - replace them with a cross-section of 2 mm².