Fog lights (PTF) for Nissan Note E11: complete installation and selection guide

Owners Nissan Note E11 often face the need to improve lighting in conditions of poor visibility - fog, rain or snowfall. The standard optics of this compact van, despite its good characteristics, do not always cope with the task of illuminating the road in difficult weather conditions. This is where **fog lights (FTL)** come to the rescue, they not only increase safety, but also give the car a more aggressive appearance.

Installing PTF on Nissan Note E11 - a task that you can handle on your own if you know the nuances of connection and the choice of components. In this article we will analyze all the stages: from the selection of certified headlights to the intricacies of installation and configuration. We will pay special attention to the **legal aspects** (so as not to run into fines), and also consider tuning options - from LED lamps to decorative grilles. If you are planning to upgrade your Note E11, this guide will become your navigation map.

Why PTFs are necessary for Nissan Note E11: advantages and features

Fog lights on Nissan Note E11 perform two key functions: **practical** and **aesthetic**. Unlike the main headlights, PTFs emit a wide and flat luminous flux that “spreads” over the road without being reflected from drops of fog. This allows the driver to better assess the size of the road and obstacles at a distance of up to 10-15 meters - a critical parameter when driving in conditions of limited visibility.

Other benefits include:

• 🔦 Increased security: reducing the risk of accidents by 20–30% when driving in fog (according to the traffic police).
• 🚗 Legality: correctly installed PTFs comply with GOST R 41.48-2004, which eliminates problems when passing technical inspection.
• 💡 Energy efficiency: modern LED PTFs consume 2–3 times less energy than halogen ones, without loading the generator.
• 🎨 Tuning potential: headlights with chrome frames or LED backlighting transform the front bumper, making the car visually wider.

However, there are also nuances. For example, Nissan Note E11 in the basic configuration it does not always have standard places for PTF - they have to be cut out or use universal fastenings. In addition, incorrect connections (for example, without a relay) may result in overloaded wiring or tripped fuses. We will talk about this in detail in the installation section.

⚠️ Attention: The use of PTF in urban conditions without fog or rain is prohibited by traffic rules (clause 19.4). A fine of 500 rubles is provided for this. The exception is driving on unlit sections of roads.

Choosing fog lights: which ones are suitable for Nissan Note E11

When choosing PTF for Nissan Note E11 It is important to consider three criteria: **bumper compatibility**, **bulb type** and **certification**. There are three main options on the market:

1. Standard PTF from Nissan (article 26110-4M000 for left and 26110-4M001 for the right one). They fit perfectly into the standard bumper holes (if provided), but are expensive (from 8,000 rubles per set).
2. Universal PTF from brands HELLA, Bosch or Depo. The bumper requires modification, but is cheaper (3,000–5,000 rubles). Popular models HELLA Micro DE (compact, with lens) and Bosch Fog Light (with increased lamp life).
3. LED-PTF from Morimoto or Philips. They provide bright white light (up to 3,000 lumens), but require the installation of an additional ignition unit. The average price is 6,000–10,000 rubles.

When choosing, pay attention to:

• 📏 Size: optimal diameter for Note E11 - 3–4 inches (75–100 mm). Larger headlights may not fit into the bumper.
• 🔧 Fastening: Check if the kit includes brackets for Nissan Or you will have to buy it separately.
• 📄 Certificate: there must be a sign on the headlights E22 (European approval) or PCT (Russian certificate).

PTF type	Average price	Brightness (lumens)	Service life	Pros	Cons
Halogen (standard)	8 000–12 000 ₽	1 200–1 500	500–1,000 hours	Easy installation, legality	High power consumption
Universal halogen	3 000–6 000 ₽	1 000–1 300	400–800 hours	Low price, wide range	Bumper needs modification
LED-PTF	6 000–15 000 ₽	2 000–3 000	30,000–50,000 hours	Bright light, low power consumption	Dear ones, we need to adjust the light beam

Critical point: LED fog lights are often sold without ECE certification, making them illegal for use on public roads. Before purchasing, ask the seller for a copy of the certificate.

Installing PTF on Nissan Note E11: step-by-step instructions

Installation of fog lights on Nissan Note E11 can be divided into three stages: **preparing the bumper**, **installing the headlights** and **connecting the electrical system**. Let's look at each of them.

1. Preparing the bumper

If your Note E11 It is not equipped with standard holes for PTF, they will have to be cut out. To do this:

1. Remove the bumper (unscrew the 4 bolts at the bottom and 2 screws in the wheel arches).
2. Apply markings under the headlights using the template included in the kit or measuring the distance from the ground (optimally 25–30 cm).
3. Cut the holes with a jigsaw or a sharp knife, and sand the edges with sandpaper.

Important: the distance between the centers of the headlights must be at least 60 cm (GOST requirement). Also make sure that the headlights do not protrude beyond the dimensions of the bumper - this is prohibited by traffic regulations.

2. Installation of headlights

Insert the PTF into the holes and secure them to the back of the bumper using brackets. For reliability, use a sealant (for example, ABRO) along the contour of the headlight - this will prevent moisture from entering. After installation, check that the headlights are not loose or warped.

3. Electrical connection

The most critical stage. You will need:

• 🔌 30 A relay (e.g. 90.37.4710 from Bosch).
• 🔧 15 A fuse.
• 📡 Wires with a cross-section of 1.5–2 mm² (length ~3 m).
• 🔧 Terminals "mother" and "father".
• 🔧 Power button (you can use the standard key on the panel).

Connection diagram:

[Аккумулятор +12В] → [Предохранитель] → [Реле (контакт 30)]
[Реле (контакт 85)] → [Кнопка включения] → [Масса]
[Реле (контакт 86)] → [Габариты или зажигание]
[Реле (контакт 87)] → [ПТФ (плюс)]
[ПТФ (минус)] → [Масса на кузов]

Connect the PTF via a relay to avoid overloading the standard wiring. It is better to take the minus from the body (for example, from the bumper mounting bolt), and the plus from the battery through the fuse. If you want the headlights to turn on only when the engine is running, connect pin 86 of the relay to the ignition wire (for example, to IGN1 in the fuse box).

Check the polarity of the wires|Install the fuse|Insulate all twists|Check the reliability of the ground|Test the headlights before assembling the bumper-->

⚠️ Attention: Never connect the PTF directly to the dimensions or low beam - this will overload the circuit and may burn the lighting control unit (BCM).

Adjusting the light beam: how to avoid dazzling oncoming drivers

Even the best quality PTFs will be useless (or even dangerous) if they are not adjusted correctly. According to GOST R 51709-2001, the light beam of fog lights must:

• 📏 Have a clear upper limit (so as not to blind oncoming drivers).
• 🔄 Be directed downward at an angle of 5–10° relative to the horizon.
• 🔴 Light the road at a distance of at least 25 meters.

To adjust you will need:

• A flat area in front of a wall (garage or parking lot).
• Screwdriver for adjusting screws on headlights.
• Tape measure and masking tape.

Step by step instructions:

1. Park the car 5 meters from the wall. Load it so that the weight corresponds to normal use (for example, put 20–30 kg in the trunk).
2. Apply markings on the wall: draw a horizontal line at the height of the centers of the headlights, and then step back 5 cm and draw a second line - this will be the upper boundary of the light beam.
3. Turn on the PTFs and adjust them with the screws so that the light border coincides with the bottom line on the wall.

If you have an LED PTF, you may have to additionally adjust the focus of the lens. For this purpose, a special key is usually included in the kit. Remember: unfocused LED headlights can blind oncoming drivers more than halogen headlights.

Tuning PTF on Nissan Note E11: ideas for individual style

Fog lights are not only a functional element, but also part of the car’s image. Owners Nissan Note E11 is often modified with PTF to make it stand out. Here are some popular ideas:

• 🎨 Color filters: yellow or blue headlight covers (e.g. from Luminics). Yellow improves visibility in fog, while blue gives a futuristic look. However, please note that colored PTFs may be prohibited by the traffic police.
• 🔆 LED angels: thin LED strips along the contour of the headlights (for example, Oracle Lighting). They work like daytime running lights.
• 🖼️ Decorative grilles: metal or plastic linings (for example, from Spec-D) protect headlight glasses from chips and give an aggressive look.
• 🔄 Dynamic turn signals: replacement of standard turn signals with PTF with indicator function (requires modification of wiring).

Before tuning, check if you are breaking traffic rules. For example, flashing PTFs (except for turn signals) are prohibited, and too bright LED modules can be equated to prohibited lighting devices.

If you want to radically change your appearance Note E11, consider installing **European PTF** with clear glass (for example, HELLA Micro DE Clear). They look stylish, but require regular polishing, as clear glass becomes cloudy faster.

What happens if you install PTF without a certificate?

Uncertified PTFs may cause refusal to undergo technical inspection. In addition, in the event of an accident, the insurance company may recognize them as “non-standard equipment” and reduce the payment. In the worst case, the traffic police inspector may oblige you to remove the headlights on the spot (Article 12.5 of the Administrative Code).

Common problems and their solutions

Even after correct installation of the PTF on Nissan Note E11 problems may occur. Let's look at typical situations and ways to eliminate them.

Problem	Possible reason	Solution
PTFs do not turn on	Faulty relay or fuse	Check the circuit with a multimeter, replace the relay
Headlights are flashing	Poor ground or contact oxidation	Clean the contacts, reconnect the ground
The light is dim	Weak battery or lamp oxidation	Check battery charge, replace lamps
PTFs turn on themselves	Short circuit in control circuit	Check the wiring from the button to the relay

If the PTFs stop working after washing, most likely water got into the connectors. In this case:

1. Remove the headlights and dry them with a hairdryer (without overheating!).
2. Treat contacts with spray WD-40 or Contact Cleaner.
3. Check the tightness of the rubber seals.

Another common problem is **bulb burnout**. Halogen lamps in PTF last on average 500–1,000 hours, but this period can be extended if:

• 🔌 Do not turn on the headlights for a long time (more than 20 minutes) without moving.
• 💡 Use lamps with an increased resource (for example, Osram Night Breaker).
• 🔧 Regularly check the voltage in the on-board network (it should not exceed 14.5 V).

💡

If, after replacing the PTF lamps, the light becomes worse, check whether you have reversed the polarity. Some LED modules are polarity sensitive and may not light up or work at half capacity.

FAQ: answers to frequently asked questions

Is it possible to install PTF on Nissan Note E11 without cutting the bumper?

Yes, but for this you will need PTF invoices (for example, from PIAA or KC HiLites). They are mounted on top of the bumper using brackets, but they look less aesthetically pleasing and can get in the way when parking. An alternative is to install headlights in the radiator grille, but this requires modification of the mounts.

Which lamps are better for PTF: halogen or LED?

The choice depends on your priorities:

• Halogen: cheaper, easier to install, legal (if the headlights are certified).
• LED: brighter, more durable, but more expensive and require adjustment of the light beam. Not all LED PTFs are certified for public roads.

For Nissan Note E11 the best option is halogen lamps Philips X-tremeVision (+130% light) or LED modules Morimoto XB LED (if you are willing to spend money on a certified option).

Is it necessary to register a PTF with the traffic police?

If the headlights are installed in regular places and have a certificate of conformity, they do not need to be registered. However, if you:

• Holes were cut out in the bumper (the design was changed).
• We installed headlights with a non-standard color (for example, blue).
• You use LED-PTF without a certificate ECE.

then you have to go through examination and make changes to the STS. The cost of the procedure is from 3,000 to 8,000 rubles.

How to connect PTF to a standard button on the panel?

B Nissan Note E11 with factory preparation for PTF (there is a connector behind the panel), you can connect to the standard button as follows:

1. Remove the instrument panel (unscrew 2 screws under the deflectors and 1 below).
2. Find the connector C105 (usually gray) - it is responsible for PTF.
3. Connect the positive wire from the relay to the contact 1 connector, and minus - to ground.
4. Check the operation of the button (it should be located to the left of the steering wheel, under the light control).

If there is no connector, you will have to install a separate button (for example, in a plug on the panel).

What to do if the PTF fogs up from the inside?

Fogging is a common problem, especially after washing. To fix it:

1. Remove the headlight and dry it with a hairdryer (temperature no higher than 60°C).
2. Check the integrity of the sealing rubber and replace it if necessary.
3. Apply an anti-fog agent to the inside of the glass (for example, Sonax Anti-Fog).
4. If the problem persists, drill a small hole (1-2mm) in the bottom of the headlight for ventilation.

If fogging is accompanied by condensation on the lamp, this may indicate a crack in the glass, in which case the headlight will have to be replaced.