Nissan Juke - a compact crossover, which, despite its modest dimensions, is equipped with everything necessary for comfortable operation. One of the most popular elements in the cabin remains the cigarette lighter (or 12V socket), which is used not only for its intended purpose, but also for connecting recorders, chargers, compressors and other gadgets. However, when overloaded or short-circuited, the first to suffer is cigarette lighter fuse - and here many owners are faced with difficulties: where is it located, what rating to choose and how to replace it correctly without damaging the car’s electrics.
In this article we will look at all the nuancesassociated with the cigarette lighter fuse in Nissan Juke first and second generations (J10 and J15). You'll learn how to quickly find a fuse box, what tools you'll need to replace it, and common mistakes that lead to repeated blowouts. We will pay special attention to diagnostics - because sometimes the problem lies not in the fuse, but in the outlet or wiring itself.
Where is the cigarette lighter fuse located? Nissan Juke?
B Nissan Juke (both in the pre-restyling version 2010–2014, and in the restyling 2014–2019) the cigarette lighter fuse is located in interior fuse box. Its location depends on the configuration and year of manufacture, but in 90% of cases it is:
- 🔧 Main cabin block — located to the left of the steering column, behind the plastic cover. To open, pull the tab at the bottom of the panel.
- 📍 Additional block - in some versions the fuse may be in the block under the glove compartment (less often).
- 🔍 Marking - look for the fuse marked
CIGAR,PWR OUTLETorACC(denomination is usually 15A or 20A).
Owners Juke with the system NissanConnect It is worth considering that in such cars the cigarette lighter fuse can be combined with the multimedia system fuse. Therefore, when replacing it, it is important not to confuse it with neighboring elements responsible for the audio system or navigation.
⚠️ Attention: In some European versions Nissan Juke (especially with diesel engines) the cigarette lighter fuse may be in engine compartment. Check the diagram on the back of the unit cover or in the instruction manual.
| Generation Juke | Year of manufacture | Fuse location | Denomination (A) |
|---|---|---|---|
| J10 (dorestyle) | 2010–2014 | Cabin block, position F32 | 15 |
| J10 (restyle) | 2014–2019 | Cabin block, position F28 or F30 | 20 |
| J15 (second generation) | 2019–present | Cabin block, position F17 | 20 |
| J10 (diesel 1.5 dCi) | 2011–2019 | Engine compartment block, position F10 | 15 |
If you are unsure of the location, use scanner ELM327 with the program Torque Pro — in some software versions you can check the status of fuses through the diagnostic connector. An alternative is to look into Service Repair Manual (FSM) for your modification Juke.
- In the cabin block to the left of the steering wheel
- In the block under the glove compartment
- In the engine compartment
- I don't know, I haven't looked yet
What fuse rating is needed for the cigarette lighter? Nissan Juke?
One of the most frequently asked questions is what fuse to install, if the regular one is burned out. It is important not to make a mistake here, since the wrong rating can lead to a fire or damage to the wiring. For Nissan Juke The following rules apply:
- 🔥 15A - standard for most versions Juke (especially pre-restyle). Suitable for cigarette lighters without additional load (for example, only for charging a phone).
- ⚡ 20A - installed in restyled and second generation (J15), as well as in cars with a high-power 12V socket (for compressors, refrigerators).
- ❌ You can’t set it more than 20A! Even if it seems to you that “this is more reliable,” this is a direct path to contact melting or fire.
If you are using a cigarette lighter for high-power devices (such as car vacuum cleaner or portable compressor), it is better to connect them directly to the battery through a splitter with a separate fuse. The fact is that even 20A may not withstand peak loads, especially if the wiring Juke not designed for high currents.
⚠️ Attention: If after replacement the fuse blows again, this is a signal about short circuit in the chain. Don't try to use a larger fuse - check the socket and wiring first with a multimeter!
When purchasing a new fuse, pay attention to type:
- 🔹 Mini Blade (ATM) - standard for Nissan Juke (size 10.9×3.8 mm).
- 🔹 Low-Profile Mini - less common, but found in some European versions.
The color of the fuse also matters: 15A - blue, 20A - yellow.
Before purchasing a fuse, check its functionality with a tester - even new parts are sometimes defective.
Step-by-step instructions for replacing the cigarette lighter fuse
Replacing the fuse in Nissan Juke - a procedure that even a beginner can handle. The main thing is to be consistent and take your time. Here step-by-step algorithm:
- Turn off the ignition and make sure that all electrical appliances (headlights, radio) are turned off. This will prevent short circuit.
- Find the fuse box (see section above) and remove the cover. Usually it is fixed with latches.
- Locate the cigarette lighter fuse according to the diagram on the back of the cover or according to the table in this article.
- Remove the faulty fuse using plastic tweezers (included with the unit). If you don't have tweezers, you can carefully pry the fuse off with a small screwdriver.
- Check the fuse visually - the burnt thread inside will be torn. If in doubt, use the multimeter in dialing mode.
- Install a new fuse the same denomination. Insert it until it clicks.
- Check the operation of the cigarette lighterby turning on the ignition and connecting a device (for example, a phone charger).
If the cigarette lighter does not work after replacement, check:
- 🔌 Socket contacts - perhaps they have oxidized or bent.
- 🔋 Socket voltage multimeter (should be ~12V when the ignition is on).
- 🔧 Wiring — frayed or melted wires require repair.
Is the ignition turned off?|Do you have a diagram of the fuse box?|Do you have a new fuse of the correct rating on hand?|Do you have a multimeter ready to test?-->
In some cases the problem lies in cigarette lighter relay (if it is included in your package). The relay is usually located next to the fuse and is labeled as POWER RELAY or ACC RELAY. Ring its contacts - if the relay does not click when you turn on the ignition, it also needs to be replaced.
Common mistakes when replacing a fuse and how to avoid them
Even something as simple as replacing a fuse can turn into problems if you make mistakes. That's what most often done wrong owners Nissan Juke:
- 🔥 Installing a larger fuse (for example, 25A instead of 15A). This leads to melting of the socket contacts and a risk of fire.
- 🔧 Using "bugs" (homemade jumpers made of foil or wire). This is a gross violation of safety regulations!
- 🔍 Ignoring the cause of burnout. If the fuse is blown, there is a problem in the circuit (short circuit or overload). Replacement without diagnostics is a temporary solution.
- 📉 Buying cheap fuses from unknown brands. They often do not correspond to the declared rating and can burn out at the slightest load.
One of the most insidious mistakes is incorrect fuse installation. If it is not inserted fully or crookedly, the contact will be unreliable, which will lead to heating and melting of the plastic body of the unit. Always check that the fuse is seated tightly and is not loose.
⚠️ Attention: If after replacing the fuse the cigarette lighter works, but after a while it burns out again, the problem may be in the device you are connecting. For example, a faulty charger or a compressor with a short circuit inside.
One more nuance - mixing up fuses. In the block Nissan Juke There are several fuses with the same rating (for example, 15A), but responsible for different circuits (lighting, power windows). If you mistakenly place the cigarette lighter fuse in the place of the power window fuse, the consequences can be unpredictable.
Never replace the cigarette lighter fuse with a bug - this can lead to a fire in the wiring and failure of the on-board computer.
Troubleshooting: Why does the fuse blow?
If the cigarette lighter fuse in your Nissan Juke burns out regularly, you need to look for it root cause. Here are the most common reasons:
| Reason | How to diagnose | How to fix |
|---|---|---|
| Short circuit in socket | Test the socket contacts with a multimeter (the resistance should be infinite) | Replace the socket or clean the contacts |
| Circuit overload (high power device) | Check the device rating (for example, a 180W compressor consumes ~15A) | Use a splitter with a separate fuse or connect directly to the battery |
| Poor contact in fuse box | Visual inspection for oxidation or melting | Clean the contacts with alcohol or replace the unit |
| Connected device malfunction | Connect another device - if the fuse does not light, the problem is in the first one | Replace or repair the device |
Particular attention should be paid cigarette lighter socket. Over time, its contacts become unbent, causing poor contact and sparking. This leads not only to the fuse blowing, but also to melting of the plastic housing of the socket. To check this, disconnect the negative terminal of the battery, remove the tunnel lining and inspect the back of the outlet.
If you find that the problem is in the wiring, do not try to repair it with electrical tape! B Nissan Juke Cigarette lighter wires are usually bundled with other circuits, and poor repairs can result in a short to ground. Better to use heat shrink tubing and soldering.
What should I do if the fuse burns immediately after replacement?
If the new fuse blows instantly when the ignition is turned on, this is a sign of a direct short circuit. In this case:
1. Disconnect the negative terminal of the battery.
2. Disconnect the connector from the cigarette lighter socket.
3. Check the circuit with a multimeter in continuity mode (there should be no short circuit between the positive wire and ground).
4. If there is a short, look for damage to the wire from the fuse box to the outlet.
How to extend the life of the cigarette lighter fuse?
To avoid frequent fuse replacement, follow these tips:
- 🔌 Don't use cheap splitters for the cigarette lighter - they often cause a short circuit.
- 📱 Do not connect multiple powerful devices at the same time (for example, recorder + laptop charger).
- 🔧 Clean the socket contacts regularly from oxidation (you can use WD-40 or alcohol).
- 🔋 Check the voltage in the on-board network - if it is higher than 14.5V, this can lead to blown fuses.
If you frequently use a cigarette lighter for high-power devices, consider installing additional 12V socket with separate fuse. You can do this yourself by connecting it directly to the battery via a relay and a 20–30A fuse. The main thing is to choose the right wire cross-section (at least 1.5 mm²).
For owners Nissan Juke with the system Start/Stop This can also affect the stability of the cigarette lighter. In such cases, installing voltage stabilizer or a capacitor in the circuit.
If you frequently transport gadgets, buy a quality USB adapter with short circuit protection. This will reduce the load on the cigarette lighter fuse.
FAQ: Frequently asked questions about the cigarette lighter fuse in Nissan Juke
Is it possible to replace the cigarette lighter fuse with a 25A or 30A?
No, this is extremely dangerous! The fuse is rated for the maximum current that the wiring can handle. If you put 25A instead of 15A, when overloaded, it is not the fuse that will melt, but the wires, which can lead to a fire. Always use the fuse of the rating specified in the manual.
Why does the cigarette lighter work, but the fuse still gets hot?
This is a sign that the fuse does not match the load or the contacts in the block have oxidized. Try replacing the fuse with a new one (even if it looks intact) and clean the contacts of the block with alcohol. If heating continues, check the circuit for overload.
Where to buy a fuse for Nissan Juke?
Fuse type Mini Blade sold in any auto store (for example, Bosch, Hella, Valeo). They can also be ordered at Wildberries, Ozon or AliExpress (but be careful with fakes). For Juke Any high-quality fuse marked 15A (blue) or 20A (yellow) will do.
Is it possible to drive without a cigarette lighter fuse?
Technically it is possible, but it is extremely unsafe. Without a fuse, any fault in the circuit (for example, a short in an outlet) can lead to melted wiring or even a fire. If the fuse blows too often, find and correct the cause rather than operating the machine without protection.
How to check the cigarette lighter fuse without a multimeter?
You can do this visually: remove the fuse and look at the light - if the thread inside is broken, it has blown. You can also replace it with a known working fuse of the same rating (for example, for turn signals) and check whether the cigarette lighter works.