Nissan Almera Classic (also known as Nissan Sunny in some countries) is a reliable car, but even small things like windshield wiper arms wear out over time. If the wipers begin to “bounce”, leave streaks, or stop pressing against the windshield altogether, the problem is most likely due to worn-out leads. In this article we will look at how to choose the right leashes for Almera Classic (body B10 And N16), what to look for when purchasing, and how to replace them yourself without mistakes.

Many owners Almera Classic are faced with the fact that the original wiper arms (Nissan 28560-4M000 for the driver's side and Nissan 28561-4M000 for passenger cars) are unreasonably expensive, and analogues are counterfeited or sold of low quality. We analyzed reviews from forums (including Drive2 And Almera-Club), we studied spare parts catalogs and compiled a checklist that will help avoid common mistakes when selecting and replacing.

Which wiper arms are suitable for Nissan Almera Classic?

On Almera Classic Two types of leashes were installed depending on the year of manufacture and configuration:

  • 🔧 For B10 body (1995–2000) - leash length 21" (driver) + 19" (passenger). Original articles: 28560-4M000 And 28561-4M000.
  • 🔧 For N16 body (2000–2006) - length 22" (driver) + 20" (passenger). Articles: 28560-95F00 And 28561-95F00.
  • ⚠️ Exception: on restyled versions N16 (2003–2006) sometimes there were leashes of length 24" + 22" - it depends on the supplier of windshield wipers on the assembly line.

Important: even if you find leashes with the same length, but from a different model (for example, Nissan Primera or Renault Megane), they may not be suitable for mounting. U Almera Classic used Hook type fastening, but with a unique bend in the lever. Check compatibility using catalogs TECDOC or Autodoc.

📊 What type of leashes do you prefer?
  • Original (Nissan)
  • Analogs (Bosch, Valeo)
  • Budget (no name)
  • Universal (with adapters)

Original vs analogues: what to choose for Almera Classic?

Original leashes from Nissan are guaranteed to fit in size and fastening, but their price is often inflated. For example, a pair of original leashes for N16 will cost 2500–3500 rubles, while high-quality analogues can be found for 800–1500 rubles.

Among the analogues, the following have proven themselves well:

  • 🏆 Bosch (series Aerotwin) - optimal price/quality ratio, but you need to check compatibility by article number (for example, 3397004530 for the driver's side).
  • 🥈 Valeo (series Silencio) - quieter than the original, but may have problems with sealing at high speeds.
  • 💰 Denso - more expensive Bosch, but more durable (fits article numbers DU-2200 And DU-2000).
  • ⚠️ No-name brands (For example, Finwhale or Champion) - cheaper, but often have play in the fastening and wear out quickly.
⚠️ Attention: On Almera Classic With air conditioning, the wiper arms may differ in length due to the different shape of the hood. Please check with official Nissan catalog or use VIN decoder.
Brand Article (driver/passenger) Price (pair), rub. Features
Nissan (original) 28560-95F00 / 28561-95F00 2500–3500 100% compatible, long service life
Bosch Aerotwin 3397004530 / 3397004528 1200–1800 Good fit, silent
Valeo Silencio 600006 / 600005 1000–1500 Soft, but can "lag" at speeds >100 km/h
Denso DU-2200 / DU-2000 1500–2000 Frost resistant, but difficult to find in stores

How to replace the wiper arms yourself Almera Classic?

Replacing leashes with Nissan Almera Classic takes no more than 15 minutes and does not require special tools. You will need:

  • 🔧 New leashes (check the length and fastening!).
  • 🧤 Gloves (so as not to scratch the windshield).
  • 🔨 Flat screwdriver or plastic puller (for prying off the latches).
  • 📏 Ruler or tape measure (to check the length of new leashes).

Step by step instructions:

  1. Raise the wiper arm perpendicular to the windshield (to the “service” position).
  2. Press the fastener release (usually located on the bottom of the leash) and slide the leash to the side to remove it from the hook.
  3. Compare the old and new leashes in terms of length and shape of attachment. On Almera Classic N16 Sometimes there are leashes with a curved base - they cannot be replaced with straight ones!
  4. Place the new leader on the hook until it clicks. Make sure the latch clicks into place.
  5. Lower the lever onto the glass and check the operation of the wipers in different modes.

Check the length of the new leashes (must match the old ones)

Make sure the mount type (Hook) is suitable for your model

Clean the mounting area from dirt and rust

Do not use force when removing - look for the latch -->

⚠️ Attention: If, after replacement, the wipers begin to “touch” each other or the edge of the hood, then the leads are too long. On Almera Classic B10 maximum permissible length - 21" for driver's side. Exceeding even 1 inch will lead to mechanism failure.

Typical mistakes when replacing leashes with Nissan Almera Classic

Even experienced car owners sometimes make mistakes that lead to broken wipers or scratches on the glass. Here are the most common:

  • 🔨 Using incompatible leashes - for example, from Renault or Opel. They may look similar, but have a different bend angle, which is why they do not clean the glass completely.
  • 🔧 Application of force during removal — if the leash doesn’t come off, don’t yank it! On Almera Classic the latch is hidden under a plastic plug (you need to pry it off with a screwdriver).
  • 🌡️ Replacement in cold weather — the plastic of the leashes becomes brittle and the fastening may break. The optimal temperature for replacement is higher +5°C.
  • 🚗 Incorrect installation — if the leash is skewed, it will “bounce” at high speeds and scratch the glass.

Another important problem is buying leashes with incorrect radius of curvature. On Almera Classic The windshield has a pronounced bend, so universal leashes (for example, from HELLA) may not fit at the edges. Check this when purchasing!

What to do if the new leash does not lock?

If the leash does not “snap” onto the hook, check:

1. Is there any rust or dirt on the hook (clean with WD-40).

2. Does the shape of the latch match (on some analogues it is too wide).

3. Is the hook itself bent (on Almera Classic it sometimes bends when removed carelessly).

If all else fails, return the leashes to the store and take the original.

How to extend the life of wiper blades?

Even the most expensive leashes will not last long if they are not properly cared for. Here are some tips for Nissan Almera Classic:

  • 💧 Clean glass with special products (For example, Liqui Moly Scheiben-Reiniger). Ordinary water leaves a limescale deposit that destroys rubber.
  • ❄️ Do not turn on the wipers on dry glass - this erases the graphite coating and leads to “bouncing”.
  • 🔧 Clean drain holes regularly under the hood (they are located under the plastic trims at the base of the windshield). If they are clogged, water will accumulate and rust the leash mounts.
  • 🌞 Park in the shade — ultraviolet radiation destroys the rubber of leashes. If you don't have a garage, use sun screen.

On Almera Classic with mileage >150 thousand km, not only the leashes often wear out, but also wiper drive mechanism (trapezoid). If, after replacing the leads, “dead zones” remain (the wipers do not move in certain areas), check the condition of the trapezoid and gearbox. In this case, repairs with disassembly will be required.

💡

Before winter, treat the leashes with silicone lubricant (for example, WD-40 Specialist Silicone). This will prevent freezing to the glass and protect the rubber from cracking.

Where to buy leashes for Nissan Almera Classic inexpensive?

Prices for wiper leashes for Almera Classic vary greatly depending on region and seller. Here's where it's best to buy:

  • 🛒 Online stores:
    • Autodoc — there are often discounts of up to 30% on analogues Bosch And Valeo.
    • Exist.ru — original leashes are cheaper than those from dealers (but check delivery times).
    • AliExpress - cheap no-name leashes (from 300 rubles), but there is a risk of running into a fake.
  • 🏬 Offline stores:
    • Auto49 or AutoSpetsCenter — originals are often available and Denso.
    • Lenta/Obi — sometimes you come across universal leashes with adapters (but you need to measure the length!).
  • 🔧 Showdown — you can find used originals for 500–800 rubles, but check the condition of the tires.

Tip: if you buy online, be sure to check with the seller whether the leashes are suitable for your body (B10 or N16). For example, on Wildberries they often sell leashes for Nissan Almera G15 (current model) that are not compatible with Classic!

💡

The most reliable way to avoid mistakes is to buy leashes based on the car’s VIN code. Most online stores (including Autodoc And Exist) support search by VIN.

Frequently asked questions about wiper arms Nissan Almera Classic

Is it possible to supply leashes longer than the original?

No! On Almera Classic increasing the length of the leashes will cause them to cling to the edge of the hood or to each other. Maximum permissible length for N16 — 22" (driver) and 20" (passenger). Exceeding even 1 inch can cause the windshield wiper trapezoid to break.

How do you know when it's time to change your leashes?

Signs of wear:

  • Wipers leave streaks or streaks.
  • The rubber is cracked or peeling.
  • The leashes "bounce" at high speed.
  • The metal frame of the leash is bent or rusty.

On Almera Classic It is also worth checking the plastic bushings in the mount - if they are loose, the leads will play.

Are leashes suitable for Nissan Primera P12?

Partially. Some leashes from Primera P12 (For example, Bosch 3397004530) are suitable in length, but may differ in the shape of the fastening. Before purchasing, check the article numbers or try on the old leash with the new one. On Almera Classic N16 It’s better to take leashes with markings "For Nissan B".

What to do if after replacement the wipers work jerkily?

Causes and solutions:

  • 🔧 Incorrect installation — check whether the leash is tightly seated on the hook.
  • 🔋 Wear of the wiper trapezoid — disassembly and lubrication of the mechanism is required.
  • ⚡ Electrical problems - check the fuse F30 (10A) in the block under the steering wheel.

On Almera Classic might also work overload protection (if the leashes are too tight). In this case, you need to remove the battery terminal for 5 minutes to reset the error.

Is it possible to restore old leashes?

Yes, but this is a temporary solution:

  • Wash the leashes in soapy water and clean the rubber with fine sandpaper (P1000).
  • Apply to rubber silicone grease (not technical silicone!).
  • If the frame is bent, straighten it with pliers (but this will weaken the structure).

However, on Almera Classic over 10 years old, it is better to immediately install new leashes - refurbished ones will last no more than 2-3 months.