Nissan Note E11 (2006–2013) is a compact hatchback that is valued for its practicality and economy. However, the model's standard trunk is often criticized for its lack of depth and lack of a convenient shelf. Owners are faced with a problem: how to place small items without blocking the view through the rear window, and without losing space?
In this article we will look at all the nuances of choosing a luggage rack Nissan Note E11 - from factory solutions to homemade designs. Let's consider materials (plastic, aluminum, plywood), mounting methods, as well as tuning options to increase functionality. We will pay special attention to compatibility with fastening systems ISOFIX and the influence of the shelf on safety in case of an accident.
Factory shelves for Nissan Note E11: original vs analogues
Original trunk shelf from Nissan (article B4010-9M000 or B4010-9M00A) is made of lightweight plastic with metal reinforcements. It perfectly follows the contours of the trunk, but has two drawbacks: a high price (from 8,000 ₽ at official dealers) and fragility when overloaded. An alternative is analogues from Honda Jazz (compatible in size) or universal shelves from Thule And Mont Blanc.
When choosing, pay attention to:
- 📏 Dimensions: length 95–100 cm, width 80–85 cm (exact measurements of your trunk are required!).
- 🔧 Fastenings: the original is fixed on the body latches, analogues may require drilling.
- 🚗 ISOFIX compatible: Some shelves block access to child seat anchorages.
- 💰 Price/quality: budget options (up to 3,000 ₽) often sag under a weight of more than 5 kg.
Critical nuance: original shelf Nissan Note E11 not designed for a load of more than 10 kg - if overloaded, the plastic bursts along the line of attachment to the body. If you plan to carry heavy bags, consider aluminum or plywood frames.
- Original from Nissan
- Universal (Thule, Mont Blanc)
- Homemade from plywood/aluminum
- I haven't decided yet
Shelf materials: comparison of pros and cons
The choice of material depends on the budget, required strength and weight. Let's look at the main options:
| Material | Strength (max load) | Weight | Cost (per sheet 1×1 m) | Difficulty of processing |
|---|---|---|---|---|
| Plastic (ABS, polypropylene) | up to 10 kg | 1.5–2 kg | 1 500–3 000 ₽ | Low (cut with a knife) |
| Plywood (10–12 mm) | up to 30 kg | 4–5 kg | 800–1 200 ₽ | Medium (needs saw, grinding) |
| Aluminum (sheet 2–3 mm) | up to 50 kg | 3–4 kg | 2 500–4 000 ₽ | High (needs jigsaw, drilling) |
| Composite (carbon fiber) | up to 20 kg | 1–1.5 kg | 5 000+ ₽ | Very high (special tool) |
For most owners Note E11 The best option is made of plywood: it is cheap, durable and allows you to create a shelf with sides for small things. Aluminum is suitable for those who carry heavy loads (for example, tools or batteries). Plastic should be chosen only for light items - bags, clothes, groceries.
⚠️ Attention: When using plywood or aluminum, be sure to tape the edges of the shelf anti-slip tape (For example, 3M Safety-Walk). This will prevent scratches on the trunk lining and reduce driving noise.
Step-by-step instructions for installing a shelf
Installing a factory shelf takes 10–15 minutes, while a homemade one takes up to 2 hours. Let's consider both options.
Installation of the original shelf
The original shelf comes with 4 plastic clips and instructions. Procedure:
- Clean the trunk of debris and dust (especially the grooves for the clamps).
- Insert the clips into the holes on the body (located in the corners of the trunk).
- Carefully lower the shelf onto the latches until it clicks.
- Check stability: the shelf should not wobble when pressed.
Installing a homemade plywood shelf
For production you will need: 10 mm plywood, jigsaw, screwdriver, self-tapping screws (16–20 mm), anti-slip mat, ruler. Algorithm:
Measure the internal dimensions of the trunk (length × width × height to the seat backs)
Buy plywood with a margin of 5–10 cm for adjustment
Prepare tools: jigsaw, drill, screwdriver, sandpaper
Purchase fasteners (screws, corners) and anti-slip material
-->
1. Markup: Transfer the contours of the trunk onto the plywood, taking into account the curves around the wheel arches. For accuracy, use a cardboard template.
2. Cutting: Cut out the workpiece with a jigsaw, sand the edges with sandpaper (grit 120–180).
3. Mount:
- Option 1: Screw the shelf with self-tapping screws to the existing holes in the body (check first for wiring there!).
- Option 2: Use L-shaped corners (2–4 pcs.), secured to the sides of the trunk.
4. Final processing: Cover the plywood with stain or paint, stick on an anti-slip mat (for example, WeatherTech).
⚠️ Attention: Do not attach the shelf to the plastic panels of the trunk - they will not withstand the load. Look for metal points on the body (usually hidden under the trim).
To prevent the shelf from rattling when driving over uneven surfaces, a thin layer can be laid between it and the body foam rubber or use silicone gaskets at fastening points.
Shelf tuning: how to increase functionality
A standard shelf is just the beginning. Owners Nissan Note E11 often modify it to suit their needs. Here are some ideas:
- 📦 Perimeter edges: Prevent small items from jumping out during sudden braking. Can be made from the same material (plywood/plastic) with a height of 5–10 cm.
- 🔌 Built-in sockets: Installation
12V socketsor a USB hub for connecting a refrigerator or vacuum cleaner. Requires battery wiring. - 🔦 Backlight: LED strip along the edge of the shelf (powered by a cigarette lighter or a separate unit). Helps at night and adds style.
- 🧲 Magnetic holders: For holding tools, flashlights or keys. Neodymium magnets with a diameter of 20–30 mm are suitable.
- 📋 Folding table: The shelf transforms into a picnic table (you need hinges and clamps).
To implement most ideas, no complex skills are required - just the ability to work with a jigsaw and soldering iron. For example, illumination can be done in 1 hour:
Материалы:
- LED-лента 12V (5 м, IP65)
- Блок питания 12V→5V (если лента 5V)
- Двусторонний скотч 3M
- Паяльник + припой
- Выключатель (опционально)
Шаги:
1. Приклейте ленту по периметру полки (изнанка).
2. Подключите к блоку питания, спрячьте его под обшивкой.
3. Выведите провод к прикуривателю или аккумулятору (через предохранитель 5A!).
How to avoid battery drain from the backlight?
Use ignition relay (connection via circuit ACC) so that the LED strip works only when the ignition is on. Or install a separate backlit switch that will remind you to turn off the light.
Compatibility of the shelf with child seats and ISOFIX
One of the key questions for families with children: will the trunk shelf interfere with the installation of a child seat? B Nissan Note E11 fastenings ISOFIX located between the seat back and trunk. Standard shelf Nissan has cutouts for them, but homemade or universal options may block access.
Problems and solutions:
- 👶 Chairs with support legs: The shelf should not interfere with the floor support. The solution is a cutout for a leg or a folding shelf section.
- 🔄 ISOFIX fastenings: If the shelf covers them, you will have to make cutouts or use alternative attachment points (seat belt).
- 📏 Shelf height: Optimally, no higher than 15 cm from the trunk floor, otherwise the seat will be tilted forward.
Before purchasing or making a shelf be sure to try on a child seat. In some cases, you will have to sacrifice a shelf or choose models with folding sections (for example, Thule Pack’n’Drive).
If you often transport children, give preference to shelves with removable sections or abandon it in favor of safety.
Safety: how the shelf affects the behavior of the car in an accident
An improperly installed or overloaded shelf can become hazardous in the event of an accident. According to crash tests Euro NCAP, loose objects in the trunk during a collision at a speed of 50 km/h acquire a weight of 20–30 times more your real. For example, a bag weighing 5 kg will hit with a force of 100–150 kg!
Things to consider:
- 🔗 Mount: The shelf must be able to withstand dynamic loads (not just static weight). Test it by braking sharply on an empty road.
- 🚨 Material: The plastic will break into sharp pieces upon impact. Plywood or aluminum are safer, but must be firmly secured.
- 📦 Cargo: Place heavy objects (batteries, tools) closer to the back of the seat and not to the rear door.
- 🔄 Load securing: Use screeds or mesh dividers to prevent things from moving.
Critical information: in crash tests Nissan Note E11 (2009) found that in a rear impact, a loose parcel shelf can penetrate the seat back and injure passengers. Always check the reliability of the fastenings!
Review of ready-made solutions: top 5 shelves for Nissan Note E11
If you don't want to bother with homemade products, consider ready-made options. We tested 5 popular models:
| Model | Material | Max. load | Price (₽) | Pros | Cons |
|---|---|---|---|---|---|
| Nissan Original (B4010-9M000) | Plastic + metal | 10 kg | 8 000–10 000 | Perfect fit, lightweight | Darling, fragile |
| Thule Pack’n’Drive | Aluminum | 30 kg | 6 500–7 500 | Durable, removable sections | Needs some sizing adjustments |
| Mont Blanc Universal | Plastic | 15 kg | 3 000–4 000 | Cheap, easy | Bends, no cutouts for ISOFIX |
| Honda Jazz OEM | Plastic | 12 kg | 4 500–5 500 | Fits without modifications | Color may not match |
| Homemade (10 mm plywood) | Plywood | 30+ kg | 1 000–2 000 | Durable, customizable | Requires time to manufacture |
For most owners, the optimal option is from Thule — it combines strength and versatility. If your budget is limited, a homemade plywood shelf will cost less and will last longer than its plastic counterparts.
FAQ: answers to frequently asked questions
Is it possible to install a trunk shelf on Nissan Note E11 with a gas cylinder?
Yes, but with reservations:
- The shelf should be metal (aluminum or steel) and fixed rigidly.
- The balloon needs to be fixed separately straps or bracket.
- Make sure that the shelf does not block the vents of the cylinder.
It is better to use special shelves for HBO, for example, from Tartarini or Lovato.
How to remove the original shelf if the latches are broken?
If the shelf latches are broken and it cannot be removed:
- Bend the rear trunk trim (carefully so as not to tear it).
- Find the plastic clips that secure the shelf to the body.
- Pry them off with a screwdriver or plastic pick.
- If the clips are broken, replace them with new ones (part number
08915-3M000).
Do not pull the shelf by force - you can damage the casing!
Which shelf to choose for transporting a dog?
To transport animals, the shelf must be:
- Durable (withstand the weight of the dog + dynamic loads).
- With sides at least 15 cm high.
- With an anti-slip coating (for example, a rubber mat).
- Easy to clean (plastic or painted plywood).
A good option is a shelf made of moisture resistant plywood with sides and removable cover. You can also use mesh separator for safety.
Where can I buy an original shelf cheaper?
The original shelf B4010-9M000 can be found at a discount:
- On Avito or Drome (used from 3,000 to 5,000 ₽).
- In groups Nissan Note in VK/Telegram (often sold after replacement with tuned versions).
- On AliExpress (Chinese replicas cost RUB 2,500–4,000, but the quality is worse).
- At official dealers during promotions (sometimes discounts up to 30%).
Before buying a used one, check the integrity of the fasteners and the absence of cracks!
How to make a shelf with drawers?
To make a shelf with drawers you will need:
- Plywood 10–12 mm (for the base and drawers).
- Drawer guides (eg Hettich Quadro).
- Handles and latches (magnetic or roller).
- Tools: jigsaw, drill, screwdriver.
Step by step instructions:
- Make a drawing taking into account the depth of the boxes (no more than 30 cm).
- Cut out the base of the shelf and the sides of the drawers.
- Install the guides on the base and sides of the drawers.
- Assemble the structure and check for smooth operation.
- Cover with varnish or film for durability.
Ready-made solutions: shelves with drawers from Thule or Mont Blanc, but they are more expensive than homemade ones.