Windshield wipers Nissan Juke - one of those parts that require regular maintenance, but are often left unattended until they stop working at the most inopportune moment. Raising the wipers to the service position is a procedure that every owner encounters when replacing blades, diagnosing a motor, or preparing for winter. However, not everyone knows that Juke The first and second generations, this process has its own characteristics related to the design of the fasteners and the electric drive.

In this article, we will analyze not only the standard algorithm for raising the wipers, but also consider typical errors that lead to a breakdown of the mechanism or a short circuit. You'll learn which tools are really necessary (and which you can do without), how to avoid damaging your windshield, and why some versions Juke The wipers get stuck in the up position. We will pay special attention to the nuances for cars with the system Auto Wipers and those who encountered a non-working drive after lifting.

Why you may need to raise the wipers on a Nissan Juke

At first glance, lifting the windshield wipers seems like a trivial task, but in practice, owners Nissan Juke turn to this procedure for various reasons. Here are the most common situations:

  • 🔧 Replacing brushes. Even if you buy brushes with the original mount U-hook 9x3, their installation requires free access to the lever, which is impossible without lifting the wiper.
  • ❄️ Preparing for winter. When parking outside in cold weather, the blades freeze to the glass. Raised wipers prevent their deformation and damage to the motor when turned on forcibly.
  • 🔍 Troubleshooting. If the wipers jerk, do not return to their original position, or make squeaking noises, they should be inspected in the raised position.
  • 🛠️ Motor or gearbox repair. To access the wiper drive, you need to remove the plastic protection, and this is impossible without first lifting the arms.
  • 🚗 Washing or polishing glass. Raised wipers make it easier to clean the top of the windshield and prevent chemicals from getting into the mechanism.

It's interesting that on Juke with the system Auto Wipers (automatic switching on when it rains) raising the wipers can disrupt the calibration of the sensor. If after the procedure the brushes begin to work asynchronously or “freeze” in the middle of the glass, you will need to reset the settings via CONSULT-III or scanner ELM327.

⚠️ Attention: On models Nissan Juke 2019 and newer with function Intelligent Auto Headlights Raising the wipers manually can trigger a false light sensor. Before the procedure, turn off the ignition and remove the key from the lock.

Tools and preparation: what you need

Unlike many European cars, where the wipers are raised by simply pressing a lever, the Juke Additional tools may be required. Here is a complete list of what will come in handy:

Tool/material Purpose Notes
Flathead screwdriver (3–5 mm) To release the brush fastening clamp Any will do, but better with a magnetic tip
Socket wrench 10 mm To unscrew the nuts securing the levers (when completely removed) Only for deep dismantling, not needed for normal lifting
Silicone grease WD-40 Specialist Machining of hinges and threaded connections Don't use regular WD-40 — it washes away the factory lubricant
Microfiber cloth For cleaning glass and levers from dirt Avoid paper towels - they leave lint
Electrical tape or masking tape Fixing the wipers in the raised position Needed for long-term parking (for example, for the winter)

Before starting work, be sure to complete the following steps:

  1. Place the car on a flat surface and secure it with the handbrake.
  2. Turn off the ignition and remove the key (on some versions Juke The wipers may operate when the door is opened).
  3. Clear the wiper mounting area of leaves, snow or ice - debris getting into the mechanism can cause jamming.
📊 How often do you raise the wipers on your Nissan Juke?
  • Only when replacing brushes
  • Before winter
  • For washing glass
  • Never picked it up
  • Other

If you are planning complete removal of the levers (for example, for painting or replacing a motor), additionally prepare:

  • 🔩 Torque wrench (nut tightening torque - 22–25 Nm).
  • 📱 Smartphone for photo recording — take a photograph of the location of the levers relative to the body in order to correctly install them back.

Step-by-step instructions: how to raise the wipers on a Nissan Juke

The procedure for raising the wipers Juke depends on the year of manufacture and configuration. Below is a universal instruction suitable for most versions (2010–2023). If your car is equipped with a system ProPILOT or Around View Monitor, pay attention to additional nuances at the end of the section.

☑️ Preparing to raise the wipers

Done: 0 / 4

Step 1. Move the wipers to the service position.

On most Nissan Juke for this you need:

  1. Turn on the ignition (without starting the engine).
  2. Briefly (for 1–2 seconds) press the wiper control lever to position INT (intermittent mode).
  3. Turn off the ignition before the wipers return to their original position.

The wipers should stop in a vertical position. If this does not happen, repeat the procedure or check the fuse F30 (15A) in the mounting block.

Step 2. Lock the arms in the raised position.

Since the mechanism Juke does not have a rigid fixation, the wipers can fall under their own weight. To avoid this:

  • Place foam supports under the levers (for example, from the packaging of household appliances).
  • Or tape them to the hood without pulling too hard.

Step 3: Remove brushes if necessary.

To replace brushes:

  1. Press the plastic lock at the base of the brush.
  2. Pull the brush up while pressing the lock with a screwdriver.
  3. Install the new brush until it clicks (original art. 28550-JK00A or 28551-JK00A).
What to do if the wipers do not lock in the raised position?

If the wipers immediately go down after turning off the ignition, the problem may be a faulty relay. K30 (located in the block under the steering wheel) or in the oxidized contacts of the motor. Try cleaning the contacts with alcohol or replacing the relay. If this does not help, diagnostics of the control unit is required BCM (Body Control Module).

Step 4. Return the wipers to their original position.

After completion of work:

  1. Remove the fasteners (duct tape or stands).
  2. Turn on the ignition.
  3. Briefly turn on the wipers in any mode - they will automatically return to the down position.
⚠️ Attention: On Nissan Juke with the system Around View Monitor (360-degree camera) do not raise the wipers while the ignition is on - this may damage the camera calibration. Always turn off the ignition before locking the levers.

Common mistakes and how to avoid them

Even experienced car owners sometimes make mistakes when raising their wipers Juke, which leads to expensive repairs. Here are the most common mistakes and ways to prevent them:

  • 🔌 Lifting with ignition on. If the wipers are in motion, stopping them forcibly can break the gear teeth of the gearbox. Always wait 5-10 seconds after turning off the ignition.
  • 🔧 Use of force when seizing. If the lever does not rise, do not pull it with force - first check to see if the motor is jammed. Try turning on the wipers manually via the diagnostic connector.
  • 🌡️ Working in cold weather without preparation. At temperatures below -10°C plastic parts become brittle. Before lifting, warm up the glass and levers with a hairdryer (keep at a distance of 20 cm).
  • 🔄 Incorrect installation of brushes. If the brush is installed crookedly, it will catch the edge of the glass and scratch it. Always check the symmetry of the fastening.

On Nissan Juke 2014–2016 with wiper motor art. 25500-JK00A Often there is a gear defect, due to which the wipers “skip” when lifting. If you hear a metallic grinding sound, immediately stop the procedure and contact a service station to replace the gearbox.

Another common problem is self-lowering wipers 10–15 minutes after getting up. This is due to the fact that the control unit BCM interprets the commit as an error and resets the position. To avoid this:

  • Disconnect the negative terminal of the battery while working.
  • Or use a diagnostic scanner to put the system into service mode.
💡

If the wipers start working out of sync after getting up, try resetting the settings through the on-board computer menu: Settings → Service → Reset wiper positions. On some versions Juke this item is hidden - hold the button to access OK on the steering wheel for 5 seconds.

Features for different generations of Nissan Juke

Design of wipers Nissan Juke The first (F15, 2010–2019) and second (F16, 2019–present) generations have key differences. Let's take a closer look at them.

Juke F15 (2010–2019)

The first generation uses a classic drive with one motor and mechanical traction. Features:

  • 🔄 The wipers rise to the service position only when the ignition is turned off to return the brushes to the lower position.
  • 🛠️ The motor is secured with three bolts 10 mm and has a separate fuse F30.
  • ⚡ A common problem is oxidation of contacts in the motor connector (located under plastic protection).

Juke F16 (2019–present)

The second generation received an updated drive with electronic control and a position sensor. Changes:

  • 🤖 To raise the wipers, you need to activate the service mode through the diagnostic connector or scanner.
  • 📱 On versions with NissanConnect the lift can be performed through the mobile application (section Vehicle Services).
  • ⚠️ Forced lifting manually (without a scanner) may result in an error U1000 in the block BCM.

On hybrid versions Juke (For example, Juke Hybrid 1.6 DIG-T) the wiper motor is connected to the energy recovery system. When lifting the levers manually, the function may be temporarily disabled e-Pedal (one-pedal mode). To avoid this, always use the standard ignition lift algorithm.

Parameter Juke F15 (2010–2019) Juke F16 (2019–present)
Lifting method Through ignition (INT + shutdown) Requires scanner or service mode
fuse F30 (15A) F30 (20A) + relay K30
Tightening torque of lever nuts 20 Nm 22 Nm
Brush compatibility Original 28550-JK00A, analogues Bosch Aerotwin Original 28550-JK10A, analogues Valeo Silencio

What to do if the wipers don't go up

If after several attempts the wipers still do not return to the service position, the reasons may be the following:

  1. Motor or gearbox is faulty. Check the fuse F30 and relay K30. If they are working properly, measure the voltage at the motor connector (should be 12V with the ignition on).
  2. Mechanism jammed. This often occurs due to corrosion in the control arm joints. Remove the plastic protection and treat the parts with lubricant Liqui Moly LM40.
  3. Control unit failure BCM. On Juke second generation this may appear as an error B2605. The solution is to reset the settings via CONSULT-III.
  4. Broken wiring. Check the circuit from the motor to the fuse box. Wires near the hood hinges often fray.

If the wipers go up but immediately go down, the problem may be:

  • 🔋 Discharged battery (voltage below 11.8V).
  • 🔄 Faulty limit switch (position sensor) on the motor.
  • 📶 Loss of connection between BCM and a motor (check CAN bus).

For diagnostics without a scanner, you can use the “dialing” method:

  1. Remove the connector from the motor (located under the plastic cover at the base of the wipers).
  2. Connect to contacts 1 (+12V) And 2 (mass) light bulb on 12V.
  3. If the light does not light up when the wipers are turned on, the problem is in the wiring or control unit.
⚠️ Attention: On Nissan Juke with the system ProPILOT Assist A malfunction of the wipers may block the activation of the autopilot. If the indicator on the dashboard is on ⚠️ ADAS, first fix the problem with the windshield wiper drive.

How to prepare wipers for winter: tips for Nissan Juke

Winter operation is a serious test for wipers Nissan Juke. To avoid breakdowns and extend the life of the mechanism, follow these recommendations:

  • ❄️ Raise your wipers before frost. If the brushes are frozen to the glass, do not force them on - this will lead to the motor burning out. Use a defrost (for example, Liqui Moly Anti-Eis-Spray).
  • 🧴 Treat the rubber of the brushes. Apply silicone grease or a special rubber conditioner (for example, Gummi-Pflege from Sonax).
  • 🔋 Check your battery. If the charge is weak, the wiper motor operates intermittently, which can lead to overheating.
  • 🚿 Wash glass correctly. Do not point the pressure washer directly at the wiper seals, as this will flush the lubricant out of the joints.

For long-term parking (for example, while on vacation):

  1. Raise the windshield wipers and secure them to the hood with electrical tape.
  2. Cover the glass with a microfiber cover to prevent frost.
  3. Disconnect the negative terminal of the battery if the car will be parked for more than 2 weeks.

On Juke with function Auto Wipers In winter, false alarms may occur due to snow on the sensor. To avoid this:

  • Clean the area around the sensor (located at the base of the rear view mirror).
  • Disable the function of automatically turning on the wipers through the on-board computer menu.
💡

Using winter brushes (eg Bosch Winter) increases the service life of the wiper mechanism by 30–40%. They have a special protective cover that prevents icing.

FAQ: Frequently asked questions about Nissan Juke wipers

Is it possible to raise the wipers on a Juke without turning on the ignition?

No, on most versions Nissan Juke To move the wipers to the service position, the ignition must be turned on briefly. The exception is models with manual lifting (rarely found on the market). If you try to raise the wipers manually without ignition, it may damage the gearbox.

Why don't the wipers return to their original position after lifting?

This is a typical problem for Juke with a worn motor or oxidized contacts. Try:

  1. Disconnect and reconnect the battery (reset BCM).
  2. Check the fuse F30 and relay K30.
  3. If this does not help, the motor or gearbox needs to be replaced.
Which brushes are better for the Juke: original or analogues?

Original brushes Nissan (art. 28550-JK00A or 28551-JK00A) provide a better fit, but wear out quickly with intensive use. Good analogues:

  • Bosch Aerotwin (art. A330H) - the best option in terms of price/quality.
  • Valeo Silencio - silent, but require frequent cleaning from dirt.
  • Denso Hybrid - durable, but more expensive than the original.

For winter, specialized models with a cover are recommended, for example, Bosch Winter.

How to remove the plastic protection of the wipers to access the motor?

Procedure:

  1. Raise the wipers to the service position.
  2. Unscrew two screws Torx T20 along the edges of the protective cover.
  3. Carefully pry off the cover with a flat-head screwdriver (it is held on by 4 plastic clips).
  4. Disconnect the motor connector and remove the cover.

When reinstalling, make sure that the clips are in place - otherwise the cover will rattle at speed.

Is it possible to drive with the wipers up?

For a short time (for example, during heavy snowfall) it is possible, but driving with the wipers up all the time is not recommended. This increases aerodynamic drag (air resistance), which can lead to:

  • Increased fuel consumption (up to +0.3–0.5 l/100 km).
  • Vibrations of levers at high speed (more than 120 km/h).
  • Damage to fastenings due to wind load.

If you need to temporarily fix the wipers (for example, at a sink), use soft supports rather than electrical tape.