Replacing the standard radio with Nissan Note E11 - a popular solution among owners seeking to improve the functionality of the audio system. However, after dismantling the old head unit, many are faced with a problem: the hole in the dashboard does not fit the standard dimensions of the new 1DIN or 2DIN radios. This is where it comes to the rescue transition frame - a part that adapts the seat to modern devices.

In this article we will look at how to choose the right frame for Nissan Note E11 (including restyled versions), what to look for when purchasing, and how to avoid mistakes during installation. You will also find step-by-step instructions with photos, a comparison of popular frame models, and answers to frequently asked questions. We will pay special attention unique nuances of frame fastening specifically for E11, which are often overlooked even by experienced installers.

Why do you need a transition frame for Nissan Note E11?

Standard seat for radio in Nissan Note E11 has non-standard sizes - 182×50 mm (height×depth), which does not coincide with the universal 1DIN dimensions (180×50 mm) or 2DIN (180×100 mm). Without an adapter frame, the new radio will either not fit into the groove or will dangle, which will lead to:

  • 🔊 Poor fastening — vibrations on bumps and the risk of the device falling out.
  • 🔌 Connector misalignment - Wires may become stretched or frayed.
  • 🚗 Aesthetic defects — gaps between the radio and the dashboard, wires are visible.
  • 🔧 Difficulties with dismantling — if there is no frame, the radio will have to be fixed “on the knee”.

In addition, the frame performs protective function: prevents dust and moisture from entering electronics, and also serves as an additional heat sink for powerful head units. In some cases, it even improves acoustics by reducing resonant vibrations of the radio casing.

⚠️ Attention: On Nissan Note E11 after 2010 (restyling), the seat may have additional protrusions for attaching climate control. Make sure the frame you choose is compatible with your version!

Types of transition frames: which one is suitable for Nissan Note E11?

Frames for Nissan Note E11 are divided into three main types, each of which solves its own problems:

  1. Universal adapters — suitable for most 1DIN/2DIN radios, but require adjustment (cutting plastic or using additional fasteners).
  2. Specialized frames - designed specifically for Note E11, take into account all the nuances of the dashboard (for example, the protrusion for the climate control buttons).
  3. Frames with decorative panel — include not only an adapter, but also a front cover to match the interior color (black, gray, wood effect).

For Nissan Note E11 the optimal choice would be specialized frames from manufacturers Pioneer, Metra or Connects2. They guarantee:

  • 🔧 Exact match with the seat (no gaps).
  • 🔄 Compatible with original dashboard mounts.
  • 🎨 Possibility of choosing a color to match the interior.
Frame type Manufacturer Article Compatibility Price, ₽
Specialized (1DIN) Metra 99-7503 Nissan Note E11 (2006–2013) 1 200–1 500
Universal (2DIN) Pioneer SM-D200 Needs improvement 800–1 000
With decorative panel Connects2 CTNI001.2 Nissan Note E11 (all versions) 2 500–3 000
For Android radios Xtrons PB78NIS01 Only for 2DIN 1 800–2 200

When choosing, pay attention to frame material: Cheap plastic models may crack during installation, but aluminum or ABS plastic will last longer. Also check the package contents - the kit should contain mounting screws and instructions with markings for drilling (if required).

📊 What radio do you plan to install in the Nissan Note E11?
  • 1DIN (single)
  • 2DIN (double)
  • Android radio
  • Apple CarPlay
  • Other

How to properly remove the head unit: step-by-step instructions

Before installing the adapter frame, it is necessary to dismantle the standard head unit. B Nissan Note E11 This can be done without special tools, but requires care not to damage the plastic of the dashboard.

Disconnect the negative battery terminal

Remove the decorative trim around the radio (pry it out from the side with a screwdriver)

Unscrew the 4 mounting screws (2 on top, 2 on bottom)

Disconnect the power and antenna connectors (remember their location)

-->

Next steps:

  1. Remove the climate control adjustment knobs (if they are in the way) - pull them towards you.
  2. Unscrew the two hidden screws under the trim (they may be under the plugs).
  3. Carefully pull out the radio, holding the connectors at the back so as not to damage the wires.

At this point you will see the footprint. Please note:

  • 🔹 Protrusions on the sides - they may need to be filed down.
  • 🔹 Mounting holes - in some versions they are shifted.
  • 🔹 Wiring harness — its length should be enough for a new radio.
⚠️ Attention: B Nissan Note E11 2008–2010 model years, the ISO connector may be non-standard. If your new radio does not fit it, you will need an adapter Nissan 10-pin to ISO.

Installing a transition frame: nuances for Nissan Note E11

The process of installing a frame depends on its type, but the general diagram looks like this:

  1. Preliminary fitting — insert the frame into the seat and check for any gaps. If the frame does not fit, carefully file its edges with a file.
  2. Attachment to dashboard — use the screws from the kit or the original screws from the standard radio. Don't screw them too tightly to avoid deforming the plastic.
  3. Fixing the radio — insert the device into the frame and secure it using the “ears” (if any) or side clips.

Features for Nissan Note E11:

  • 🔧 If you have a version with climate control, the frame must have a cutout for buttons. Otherwise, they will have to be reinstalled higher or lower.
  • 🔌 Check if the frame is blocking access to CAN bus (if you connect a multimedia system that supports an on-board computer).
  • 🎵 To improve the sound, you can lay vibration-absorbing material between the frame and the radio (for example, StP).

After installation, turn on the radio and check:

  • 🔊 The operation of the speakers (is there any wheezing or distortion).
  • 📶 Radio reception (antenna connector must be tightly connected).
  • 🔄 Steering functions (if an adapter is connected).
💡

If the radio gets hot after installation, check the gap between its back wall and the frame - it should be at least 10 mm for ventilation.

Common installation mistakes and how to avoid them

Even experienced car owners make mistakes when installing the transition frame. Here are the most common ones and how to prevent them:

Error Consequences How to avoid
Using an incompatible frame The radio does not fit into place, there are gaps Check the frame article number using the vehicle VIN
Screws are too tight Cracks in the plastic of the dashboard Tighten the screws in a crisscross pattern with moderate force.
Ignoring dashboard protrusions Frame does not fit tightly File the protrusions on the frame, not on the dashboard
Incorrect connection of connectors Short circuit, radio failure Take a photo of the original pinout before disconnecting

Another typical problem is misalignment of the radio and frame. This happens if the frame is installed crookedly or the fasteners are not tightened evenly. To fix this:

  1. Loosen all screws.
  2. Align the frame with the top edge of the dashboard.
  3. Tighten the screws diagonally (like the wheels on a car).

If after installation the radio tape recorder “walks” in the frame, use additional rubber gaskets or double-sided tape to fix it.

What to do if the frame does not fit in depth?

If the depth of the seat is less than required for the radio, you can:

1. Install the radio without the back cover (if the design allows this).

2. Use an “extended” frame with offset (for example, Metra 99-7503B).

3. Move the radio a little forward, sacrificing aesthetics (it will protrude by 5–10 mm).

Where to buy a transition frame for Nissan Note E11?

You can buy a frame in several places, but it is important to choose a reliable seller to avoid fakes:

  • 🛒 Official dealers Nissan - guarantee of original quality, but high price (from 3,000 ₽).
  • 🌍 Foreign stores (Amazon, eBay, AliExpress) - wide selection, but long delivery and risk of incompatibility.
  • 🏬 Local car wreckers - you can find used frames from disassembled ones Note E11 at a price of 500–800 ₽.
  • 🛠️ Specialized auto electronics stores (AutoSound, CarAudio) - the best option in terms of price/quality ratio.

When purchasing online, be sure to check:

  • 📋 Compatible with your year of manufacture Nissan Note E11 (dorestyle/restyle).
  • 📦 Package contents (are mounting screws and instructions included).
  • 🔄 Possibility of return if the frame does not fit.

Average prices for new frames in 2026:

  • 💰 Universal (made in China) - 600–900 ₽.
  • 💰 Specialized (Metra, Connects2) — 1 200–2 500 ₽.
  • 💰 With decorative panel - 2,500–4,000 ₽.
⚠️ Attention: On AliExpress they often sell "universal for Nissan" frames that actually don't fit Note E11. Look for products marked "For Nissan Note E11 2006–2013".

FAQ: Answers to frequently asked questions

Is it possible to install a 2DIN radio in a Nissan Note E11 without modifications?

No, standard seat in Nissan Note E11 Designed for 1DIN only. To install 2DIN you will need:

  1. Special adapter frame (for example, Metra 95-7503).
  2. Modification of the dashboard (trimming the plastic under the lower part).
  3. Relocating the climate control unit (if it is in the way).

Without these modifications, the radio simply will not fit in height.

Which frame to choose for Android radio?

For Android devices, frames with increased depth are suitable, since these radios are usually thicker than standard ones. Recommended models:

  • Xtrons PB78NIS01 — for 1DIN Android radios.
  • Pumpkin Android 2DIN Kit - if you are ready to modify the dashboard.

Please note connector for rear view camera - some frames do not have a hole for it, and you will have to cut it out yourself.

Do I need to reflash the radio after installation?

Reflashing is not required if:

  • You are using a radio with support CAN buses (to display data from the on-board computer).
  • All connectors are connected correctly (power, speakers, antenna).

However, it may be necessary setting:

  • Setting the region (for radio).
  • Calibrating the touch screen (if the radio has a touchscreen).
  • Linking steering wheel buttons (via the radio menu or adapter).
How to attach the frame if the kit does not include screws?

If the screws are lost or do not fit, use:

  • Self-tapping screws M4×12 mm - Suitable for most frames.
  • Double sided tape 3M — for temporary fixation (not recommended as a permanent solution).
  • Rivets - if the frame is metal and requires rigid fastening.

The main thing is not to use screws that are too long, so as not to damage the wiring behind the dashboard.

Can the frame be painted to match the interior color?

Yes, the frame can be painted, but taking into account the material:

  • 🎨 Plastic frames - use acrylic paint with a primer (for example, Motip or Duplicolor).
  • 🔧 Metal frames — automotive enamel in cans is suitable (degrease the surface before painting).

For best results:

  1. Remove the frame and paint it separately.
  2. Apply 2-3 thin coats and allow to dry.
  3. Apply varnish to protect against scratches.
💡

For Nissan Note E11 after 2010 (restyling), only specialized frames with a cutout for climate control buttons are suitable. Universal adapters will require modifications!