Front bumper <em>Nissan Tino</em>: how to choose, replace and repair

Nissan Tino - a compact van, which, despite modest sales in Russia, is still in demand in the secondary market due to its practicality and reliability. One of the most vulnerable parts of this car is front bumper: It often suffers from minor accidents, parking and even natural wear and tear of the plastic. In this article we will look at everything you need to know about the bumper. Tino — from the selection of spare parts to the nuances of installation and painting.

Owners Nissan Tino (especially the 1999–2006 editions) are faced with the problem of finding original parts: official imports have long been stopped, and examples with dubious histories remain in disassembly. We analyzed the spare parts market, reviews from craftsmen and technical documentation to create a complete guide to bumpers for Tino, including articles, compatibility with other models Nissan and life hacks for saving.

Original and similar bumpers for Nissan Tino: articles and compatibility

Original front bumper for Nissan Tino (body V10) has an article number 62001-4M000 (for versions without PTF) and 62001-4M001 (with fog lights). These parts were manufactured by Nissan until 2006, so new originals are almost impossible to find. On the secondary market, the price ranges from 8,000 to 15,000 rubles, depending on the condition.

If the original is not available, consider analogues from trusted manufacturers:

• 🔹 Febi (article 23300) - high-quality plastic, fully compatible with fasteners. Price: ~6,500 rub.
• 🔹 Hella (article 8EL 355 109-561) - reinforced design, suitable for versions with PTF. Price: ~7,200 rub.
• 🔹 AMS (article NIS-62001) is a budget option, but requires some modification to the fit. Price: ~4,800 rub.
• 🔹 Used from disassembly - a risky choice: bumpers with microcracks or traces of repair are often sold. Average price: 3,000–5,000 rubles.

Important: bumpers from Nissan Primera P11 (article 62001-4M025) are similar in appearance, but don't fit for Tino due to different fastenings and shape of the petticoat. Also parts from Almera N16 — despite the common platform, the geometry is different.

When a bumper replacement is required: signs and diagnosis

Cracks or scratches are not always a reason for a complete replacement. Assess the condition of the bumper using these criteria:

Type of damage	Can it be repaired?	Recommendation
Minor scratches (up to 0.5 mm)	Yes	Polishing or local painting
Cracks up to 10 cm long	Yes (plastic welding)	Use PP welding rod and reinforcing mesh
Chips with exposed fasteners	Partially	Recovery is possible, but strength will decrease by 30–40%
Impact deformation (bending)	No	Replacement - plastic loses structure under heavy loads
Peeling of paintwork (bubbles, peeling)	No	Replacement - plastic corrosion is inevitable

⚠️ Attention: If the bumper is cracked in the area where it attaches to the side member (usually to the left or right of the license plate), it definitely needs to be replaced. Even after welding, such a part will not withstand the load during the next impact, which can lead to damage to the radiator or headlights.

To diagnose, inspect the bumper for:

• 🔍 Hidden cracks — feel the plastic from the inside (often the damage is not visible from the outside).
• 🔍 Material delamination - a sign of aging plastic (typical for bumpers over 15 years old).
• 🔍 Corrosion of fasteners — rusty bolts or rivets indicate moisture getting inside.

How to check the bumper for hidden damage?

Use a flashlight and inspect the part from the inside. Pay special attention to the areas near the fastenings to the body and corners - dirt often accumulates there, masking cracks. Also press on the bumper at several points: if the plastic bends unevenly, this is a sign of internal breaks.

Step-by-step instructions for replacing the front bumper with Nissan Tino

To replace the bumper you will need:

• 🔧 Socket set (10 mm, 12 mm)
• 🔧 Screwdriver with Phillips bit (PH2)
• 🔧 Plastic clips (item no. 90467-01200, ~10 pcs.)
• 🔧 Sealant for plastic (for example, 3M 08597)

Step 1. Removing the old bumper

1. Unscrew the bolts securing the bumper to the side members (2 on each side, 10 mm head).
2. Remove the plastic clips at the bottom of the bumper (under the radiator grille). Be careful - they break often!
3. Disconnect the connectors for the fog lights (if equipped) and the parking sensor (on versions with parking sensors).
4. Gently pull the bumper towards you, starting from the corners. If it does not budge, check to see if there are any unnoticed fasteners.

Step 2: Preparing the new bumper

Before installation:

• 🔹 Check the package: the box must contain all the clips and seals.
• 🔹 Try the bumper on the body without tightening bolts - make sure all holes match.
• 🔹 Treat fastening points with sealant to prevent corrosion.

Step 3: Installation

Follow the sequence:

1. Attach the bumper to the lower clips (under the grille).
2. Connect the PTF and sensor connectors.
3. Tighten the bolts to the side members (tightening torque: 8–10 Nm).
4. Adjust the gaps between the bumper and fenders (should be the same on both sides).

⚠️ Attention: If after replacement the bumper “walks” when pressed, the problem is worn side member fastenings. In this case, it is necessary to replace the metal brackets (item no. 62010-4M000).

Painting a bumper: technology and common mistakes

If you paint the bumper yourself, avoid these mistakes:

• 🎨 Poor surface preparation — 70% of success depends on grinding and degreasing. Use abrasive P800 for old paintwork and P1200 for finishing.
• 🎨 Wrong soil - needed for plastic adhesive primer (For example, Body 960). Regular acrylic will not provide grip.
• 🎨 Thick coat of paint - on plastic this leads to smudges and prolonged drying. Optimally 2-3 thin layers with interlayer drying for 15 minutes.

Painting technology:

1. Sanding — remove the old paintwork down to the plastic if there are chips. For smooth surfaces, matting is sufficient.
2. Degreasing - use antisilicone (For example, APP W700).
3. Primer — apply adhesive primer in 1 layer, then acrylic filler (2 layers).
4. Painting — base enamel (2 layers) + varnish (2 layers). For Nissan Tino original colors: KH3 (beige), BQ5 (blue), KY0 (black).

⚠️ Attention: When painting a bumper with chrome inserts (on versions Tino SVE) they need to be sealed with masking tape or removed. The paint does not adhere to chrome and will peel off after 2-3 months.

Bumper Crack Repair: Welding vs. glue

For repairing cracks on the bumper Nissan Tino there are two methods: welding plastic And gluing. The choice depends on the type of damage:

Method	Suitable for	Pros	Cons
Rod welding	Cracks >5 cm long, fractures	Strength 90% of the original, durable	Requires equipment, risk of burning plastic
Glue (epoxy)	Small cracks, chips	Simplicity, no need to remove the bumper	Strength 50–60%, vibration resistant
Reinforcing mesh + putty	Cosmetic repairs (no loads)	Low price, suitable for DIY	Does not restore structural strength

Welding plastic (step by step):

1. Sand the crack on both sides with sandpaper. P80.
2. Warm up the soldering iron (power 60–80 W) and the rod for PP plastic (diameter 3–4 mm).
3. Boil the crack from the inside, forming a “seam”.
4. Sand the seam on the outside and apply plastic putty.

For gluing use epoxy glue (For example, 3M DP8005) with reinforcing fabric. But remember: such repairs will not withstand heavy loads (for example, even a slight impact when parking).

Where to buy a bumper for Nissan Tino: verified suppliers

Due to the low popularity of the model, the selection of spare parts is limited. We tested several suppliers and compiled a rating:

• 🏆 Existen.ru — the best choice for original used parts. There are photographs of each bumper, a 14-day guarantee. Average price: 7,000 rub.
• 🥈 Autodoc.ru — a wide range of analogues (Febi, Hella). Delivery 3–5 days. Prices are 10–15% higher than the market, but there are discounts.
• 🥉 Aliexpress — budget bumpers (~3,500 rubles), but the quality of the plastic is worse than the original. Risk of mismatch of fastenings.
• 🔧 Local showdowns - the cheapest (RUB 2,000–4,000), but there is no guarantee. Check compatibility with your modification on site Tino.

When buying a used bumper, pay attention to:

• 🔍 Plastic color — over time it burns out. Compare with your bumper in daylight.
• 🔍 Mounting holes — they are often torn or deformed.
• 🔍 Availability of rubber seal — it prevents water from entering the radiator.

⚠️ Attention: On Nissan Tino 2004–2006 model years, bumpers with another PTF mount (article 62001-4M010). Check the year of manufacture of your car before purchasing!

Frequently asked questions about bumpers Nissan Tino

Is it possible to install a bumper from a Nissan Primera on a Tino?

No, despite the external similarity, the fastenings and shape of the petticoat are different. Bumper from Primera P11 will dangle and will not stay close to the wings. Exception - modifications Tino for the Japanese market (body V10J), but they are extremely rare in Russia.

What glue is best for repairing cracks?

Suitable for structural repairs 3M DP8005 or Loctite 330. For cosmetic - adhesive putty (For example, Chief Flexible Part Repair). Important: treat the plastic before gluing adhesion activator (For example, APP W790).

How much does it cost to paint a bumper at a service center?

The cost depends on the region and complexity of the work:

• Local painting (1–2 elements): RUB 3,000–5,000.
• Full painting with dismantling: RUB 8,000–12,000.
• Painting with crack repair: RUB 10,000–15,000.

Savings: if you remove the bumper yourself, the price will decrease by 20–30%.

What to do if the PTFs do not work after replacing the bumper?

Check:

1. Connecting connectors to lamps (the polarity is often reversed).
2. fuse F12 (10A) in the block under the steering wheel.
3. Fog light relay (located next to the fuse box).
4. Integrity of the wiring - when dismantling the bumper, the wires could have frayed.

If the problem persists, check mass on the body (mounting point under the battery).

How to protect the bumper from chips?

Effective ways:

• 🛡️ PPF film (polyurethane protection) - cost 5,000–7,000 rubles, lasts 5–7 years.
• 🛡️ Vinyl wrap - cheaper (RUB 2,000–3,000), but less durable.
• 🛡️ Anti-gravel coating (For example, Liqui Moly Kunststoff-Pflege) - applied 2 times a year.
• 🛡️ Parktronic - prevents bumps when parking (parking kit) Tino costs ~4,000 rubles).