Nissan Almera Classic B10 - a reliable sedan that is still popular in the secondary market. However, over time, the trunk lining wears out: cracks appear, fabric peels off, and plastic elements lose their presentable appearance. Properly selected and installed trim will not only restore aesthetics, but also protect the body from corrosion, reduce noise in the cabin and even improve thermal insulation.
In this article we will analyze all the stages - from the choice of materials to the subtleties of installation. You will find out which cladding options are suitable for trunk Almera Classic B10, how to avoid common mistakes during installation and how factory parts differ from analogue ones. We will pay special attention to practical tips that will save your time and money.
Why does the trunk trim require attention?
trunk Nissan Almera Classic B10 is not just a place for transporting goods. Its casing performs several key functions:
- π‘οΈ Body protection from mechanical damage, moisture and dirt, which eventually lead to corrosion.
- π Noise insulation: high-quality casing absorbs vibrations and reduces noise from the road surface.
- π₯ Thermal insulation, especially relevant when transporting products or during the cold season.
- ποΈ Aesthetics: worn or cracked trim spoils the overall appearance of the interior, especially if the car is used for taxis or car sharing.
On Almera Classic B10 The factory trunk liner is often made from pressed cardboard with a fabric covering. Over time, this material loses strength, especially if the machine was operated in conditions of high humidity or temperature changes. Owners often encounter the problem of fabric peeling off at the seams - this is the first sign that itβs time to change the upholstery.
In addition, poor-quality or damaged cladding can cause an unpleasant odor. By absorbing moisture, the cardboard layer becomes a breeding ground for bacteria and mold. If you notice a musty smell from the trunk, even after cleaning, the problem most likely lies in the trim.
- Original (factory)
- Plastic analogue
- Fabric with sound insulation
- Premium leatherette
- I haven't decided yet
Types of trunk trim Nissan Almera Classic B10
There are several types of cladding on the market, differing in material, price and functionality. Let's look at the main options, their pros and cons.
| Sheathing type | Material | Benefits | Disadvantages | Average price (RUB) |
|---|---|---|---|---|
| Original (OEM) | Pressed cardboard + fabric | Perfect fit, factory quality | Expensive, short-lived with intensive use | 4 500 β 7 000 |
| Plastic | ABS plastic or polypropylene | Durable, moisture resistant, easy to clean | May rattle when moving, worse sound insulation | 2 500 β 5 000 |
| Fabric with sound insulation | Multilayer material (fabric + foam rubber + film) | Excellent sound and heat insulation | Requires careful care, can absorb odors | 3 000 β 6 500 |
| Leatherette | PU leather + soft backing | Premium look, durability | High price, difficult installation | 6 000 β 12 000 |
For Almera Classic B10 The two most popular options are: plastic sheathing (if the priority is practicality) and fabric with sound insulation (if comfort and silence in the cabin are important). Original parts fit perfectly, but their cost is often unreasonably high, especially for a car of this class.
When choosing analogues, pay attention to quality of fastenings. Cheap Chinese options may have inaccurate holes for the clips, which will complicate installation. Also check whether the kit includes all the necessary fasteners - often you have to purchase them separately.
β οΈ Attention! If you are purchasing soundproofing, make sure the material is fire safety certificate. Cheap analogues can release toxic substances when heated.
Preparing to replace the casing: tools and dismantling
Before installing new casing, you must carefully remove the old one. This process requires patience as the clips and latches are Almera Classic B10 often break due to careless handling. Here's what you'll need:
- π§ Plastic puller (or a flathead screwdriver wrapped in electrical tape to prevent scratching the plastic).
- 𧲠Magnet to find dropped clips.
- 𧴠Plastic cleaner (For example, Sonax Plastic Cleaner).
- π§° Set of new clips (usually 8-12 pieces required, item number for Almera B10 β
77010-4M000). - πΈ Smartphone for photographing the location of the fasteners.
Dismantling process:
- Open the trunk and remove the shelf (if equipped). It is attached to 2β4 plastic clips.
- Using a puller, carefully pry up the side trim, starting from the canopy. Clips are usually located around the perimeter and in the center.
- Disconnect the wires from the courtesy light (if equipped). Remember or take a photo of the connection order.
- Remove the old trim and clean the metal surface of the trunk from dirt and rust.
Pay special attention mounting clips. On Almera Classic B10 They often break when removed, so it is better to immediately buy spare ones. If the clip breaks, do not try to reuse it - this will cause the new trim to rattle.
Buy new trim and clips|Prepare tools (puller, magnet, cleaner)|Take photos of the location of wires and fasteners|Clean the trunk of debris and dust|Check for rust on the metal-->
β οΈ Attention! If there are traces of rust on the metal surface of the trunk, be sure to treat them rust converter (For example, Tsinkar) and apply primer. Otherwise, corrosion will continue to spread under the new skin.
Step-by-step instructions for installing new sheathing
Installing the trunk trim on Nissan Almera Classic B10 does not require special skills, but it is important to follow the sequence of actions. Let's look at the process using plastic sheathing as an example (for other materials the steps are similar, but the details of fastening may differ).
Step 1. Checking the contents.
Unpack the new casing and check the instructions. The kit should include:
- Main cladding panel.
- Clips (if you donβt have them, use those purchased separately).
- Mounting bolts for the lampshade (if provided).
- Sealing rubber bands (for some models).
Step 2: Installing clips.
Place the new clips on the trim into the holes provided for them. Do not overtighten them - they should fit snugly, but without deformation. On Almera B10 clips are usually located:
- On the sides (4 pieces).
- In the center (2β3 pieces).
- In the area of the trunk lid hinges (2 pieces).
Step 3. Attaching the sheathing.
Carefully insert the trim into the trunk, starting from the top (canopy side). Make sure all the clips are in their slots. If the trim doesn't sit straight, don't push on itβcheck to see if there's anything in the way (like wiring or debris).
Step 4. Connecting the lamp.
If there is a light in the trunk, connect the wires to the lamp in the same order in which they were disconnected. Check the lamp operation before permanently fixing the trim.
Step 5. Final check.
Close the trunk and check for any extraneous sounds (rattling, squeaking). If the paneling rattles, it means that one of the clips is not latched - you will have to remove the panel and reinstall it.
Before final fixation of the casing, treat the clips with silicone grease (for example, WD-40 Specialist). This will make future dismantling easier and prevent squeaks.
Common mistakes and how to avoid them
Even with the apparent simplicity of the process, many owners Nissan Almera Classic B10 make mistakes that then have to be corrected. Here are the most common ones:
- π§ Using old clips. Even if the clip appears intact, it may have lost its elasticity. Always install new ones.
- π§Ή Unclean trunk surface. Dust and debris under the casing lead to squeaks and premature wear.
- π Incorrect lamp connection. Mixed wires can cause a short circuit.
- π Hole misalignment. If the trim is not original, trimming may be required (do this carefully with a knife or scissors).
- π¦ Ignoring moisture insulation. If the trunk often gets wet (for example, due to a leaking rubber seal), the lining will quickly become unusable.
One of the most serious mistakes is incorrect fixation of the trim in the area of the trunk hinges. If the panel does not fit tightly there, over time it will begin to rub against the metal, which will lead to squeaks and damage to the paint. To avoid this, use additional screws with rubber washers (but do not overtighten them!).
One more nuance - plastic processing before installation. If you are installing plastic sheathing, it can be pre-coated anti-squeak spray (For example, Liqui Moly Kunststoff-Pflege). This will prevent annoying sounds from occurring when driving over uneven surfaces.
What to do if the sheathing does not fit correctly?
If the new trim is slightly larger or smaller than the original, do not try to force it in. It is better to carefully trim the extra millimeters with a stationery knife (for plastic) or scissors (for fabric covering). The main thing is not to overdo it, otherwise there will be gaps. For a precise fit, use masking tape to mark the cutting lines.
Caring for trunk trim: how to extend its service life
Even the highest quality cladding will last longer if it is properly cared for. For Nissan Almera Classic B10 recommendations depend on the type of material:
- π§Ό Plastic sheathing: Wash with warm water and a mild detergent (eg Autoglym Interior Shampoo). Avoid abrasive sponges.
- π§Ή Fabric covering: Vacuum regularly, use a foam cleaner (e.g. Profoam 2000). Don't scrub with a brush!
- 𧴠Leatherette: Wipe with a damp microfiber plus leather conditioner (e.g. Leather Care).
General care rules:
- Do not use solvent-based products (acetone, white spirit) to clean the sheathing - they destroy the material.
- After washing the trunk, dry the trim thoroughly, especially if it is fabric. Humidity leads to mold.
- If you carry dirty or wet items in the trunk, use a protective layer (such as a rubber mat).
For plastic sheathing, you can apply it once every 3β4 months. protective polish (For example, Armored Max). This will prevent fading in the sun and the appearance of microcracks. Fabric coverings should be treated once a year antibacterial sprayto avoid unpleasant odors.
β οΈ Attention! If cracks appear on the sheathing (especially on plastic panels), do not ignore them. Through cracks, moisture penetrates into the metal of the trunk, which leads to corrosion. Small cracks can be repaired liquid plastic (For example, Hobby Plastic Weld), but if the damage is significant, it is better to replace the casing.
Where to buy trunk trim Nissan Almera Classic B10?
When choosing a place to purchase, focus on the ratio of price, quality and guarantees. Here are the main options:
| Source | Benefits | Disadvantages | Average prices |
|---|---|---|---|
| Official dealer Nissan | Original quality guaranteed, precise fit | Expensive, long delivery | 5,000 β 8,000 rub. |
| Online stores (for example, Exist.ru, Autodoc) | Large selection of analogues, fast delivery | Risk of running into a low-quality replica | 2,000 β 6,000 rub. |
| Auto parts markets | You can touch before you buy, bargain | No guarantee, high chance of fake | 1,500 β 5,000 rub. |
| Atelier for sewing car covers | Individual tailoring, choice of materials | Long, expensive (from RUB 8,000) | 8,000 β 15,000 rub. |
When purchasing online, be sure to check:
- π Part number. For original trunk trim Almera Classic B10 this is
80510-BM400or80510-4M000(depending on the year of manufacture). - π¦ Complete set. The description should indicate whether the kit includes clips and fasteners.
- β Reviews. Pay attention to photographs of real buyers - you can often see the quality of fit there.
If you choose non-original cladding, give preference to proven brands, such as Febi, Hella or Topran. They offer high-quality analogues that are almost as durable as the original.
When purchasing soundproofing trim, check with the seller to see if the material is certified for use in automobiles. Cheap analogues can release toxic substances when heated, which is hazardous to health.
FAQ: Frequently asked questions about trunk trim Nissan Almera Classic B10
Is it possible to install the trunk trim yourself if you have no experience?
Yes, installing the trunk trim on Almera Classic B10 - one of the simplest procedures in auto repair. The main thing is to carefully remove the old panel without breaking the clips and follow the instructions. If you have never dealt with auto electricians, it is better to entrust the connection of the lamp to a professional.
How long does it take to replace the casing?
If you have tools and new sheathing, the process takes 1 to 2 hours. Most of the time is spent on dismantling the old panel and cleaning the trunk. If this is your first time doing this on your own, allow yourself 3-4 hours.
What is the difference between the cladding Almera Classic B10 before and after restyling?
After restyling (2010), the shape of the trim in the area of the canopy and trunk hinges changed slightly. Original parts are not interchangeable! When purchasing, check the year of manufacture of the car. Analogues are often universal, but may require trimming.
Is it possible to restore old trim without buying new?
If the casing is intact, but has lost its appearance, it can be restored:
- Paint the plastic panel structural paint (For example, Plasti Dip).
- Clean the fabric covering with a steam generator and treat water repellent spray.
- Fix small cracks liquid skin or plastic glue.
However, if the sheathing is delaminated or rotten, restoration is pointless - only replacement.
Which trim is better for taxis or car sharing?
Optimal for commercial use plastic sheathing with anti-slip coating. It is easy to clean, does not absorb odors and can withstand frequent use. Alternative - fabric upholstery with vinyl coating (for example, from 3M Scotchgard), which protects against stains and moisture.