Owners Nissan Note We are often faced with the question: how much oil should be poured into the engine when changing? The answer depends on the generation of the car, the type of engine and even the year of manufacture. An error in volume may result in oil starvation or overflow, which can lead to serious damage. In this article we have collected official data by oil volume for all versions Nissan Note (including restyled models), and also discussed the nuances of choosing viscosity and checking the level.

Feature Nissan Note - compact but technologically advanced engines of the series HR, which require strict adherence to maintenance regulations. For example, motor HR16DE sensitive to oil quality, and in HR12DE It is critical to monitor the level due to the small volume of the crankcase. We analyzed manufacturer's manuals, owner reviews and dealership data to provide exact numbers without contradictions.

Official data: oil volume by model and engine

Engine oil volume Nissan Note varies from 2.7 to 4.3 liters depending on modification. Below is a table with data for all generations, including rare versions for the Japanese market (Note e-Power). Values given with complete replacement with filter.

Model/Generation Engine Oil volume (l) Years of manufacture Notes
Nissan Note E11 HR12DE (1.2) 2.7 2006–2012 Without filter - 2.5 l
Nissan Note E11 (restyling) HR15DE (1.5) 3.4 2009–2013 For automatic transmission - 3.6 l
Nissan Note E12 HR16DE (1.6) 4.3 2013–2020 With filter 15208-9F60A
Note e-Power (hybrid) HR12DE + electric motor 2.9 2016–present Synthetic only 0W-20
Nissan Note Aura (Japan) HR16DE (turbo) 4.5 2018–present Turbocharged version

⚠️ Attention: For engines with a timing chain drive (e.g. HR16DE) it is critical to use oil with approval Nissan Strong Save X or analogues with markings ILSAC GF-5. Application of oils with viscosity 5W-40 or higher may lead to increased chain wear due to insufficient fluidity at cold start.

If your Nissan Note equipped with a system Eco Mode, the manufacturer recommends reducing the oil change interval by 20% (from 15,000 km to 12,000 km). This is due to more frequent engine operation cycles on a rich mixture.

📊 What engine does your Nissan Note have?
  • HR12DE (1.2)
  • HR15DE (1.5)
  • HR16DE (1.6)
  • Hybrid e-Power
  • I don't know

How to check the oil level correctly

Checking the oil level in Nissan Note has nuances due to the design of the pallet. Here are step-by-step instructions to help you avoid mistakes:

  1. Warm up the engine to operating temperature (the pointer arrow should be in the middle).
  2. Turn off the engine and wait 5–7 minutes — the oil should drain into the pan.
  3. Remove the dipstick and wipe it with a clean, lint-free cloth and push it back in until it stops.
  4. Remove the dipstick again and check the level. It should be between the marks MIN And MAX, but closer to the top.

⚠️ Attention: In engines HR12DE And HR15DE the dipstick has two pairs of marks - for cold and hot oil. Use top pair (hot engine), since during a cold check the level will be lowered by 0.3–0.5 l.

If the level is lower MIN, add oil in small portions (100 ml each), checking the dipstick each time. Overfilling is just as dangerous as underfilling: in HR16DE this may cause the oil to foam and turbine damage (in version Aura).

Make sure the car is on a level surface|

Warm up the engine to operating temperature|

Wait 5-7 minutes after stopping the engine|

Use original dipstick (not aftermarket)

-->

What oil to fill: viscosity and tolerances

Manufacturer Nissan strictly regulates the requirements for oil for Note. Main criteria:

  • 🔹 Viscosity: For most motors - 5W-30 or 0W-20. Exception: HR16DE in climates with temperatures below -30°C requires 0W-20.
  • 🔹 Tolerances: ILSAC GF-5 or GF-6, and also API SN/SP. For hybrids (e-Power) - only GF-6.
  • 🔹 Nissan Specifications: Strong Save X (article KE900-90132) or Strong Save II.
  • 🔹 Canister volume: For HR12DE 3 liters is enough for HR16DE — 5 l (with reserve for topping up).

⚠️ Attention: Oils with viscosity 5W-40 or 10W-40 not recommended for Nissan Note due to the risk of deposits forming on the system valves VVL (variable valve timing). An exception is engines with mileage over 200,000 km, where permitted 5W-40 with a high content of additives (for example, Liqui Moly Special Tec AA).

For hybrid versions (e-Power) it is critical to use oil with low friction coefficient, since the engine often operates in start-stop mode. Optimal choice - Nissan ECOmedal 0W-20 or Idemitsu Zepro Eco Medalist.

💡

If you live in an area with sudden temperature changes, use oil 0W-20 all year round - it will provide easy starting in winter and protection from overheating in summer.

Common mistakes when changing oil and how to avoid them

Even experienced owners Nissan Note make mistakes when changing the oil. Here are the most common:

  • 🚫 Incorrect volume: Bay 4.3 l instead of 3.4 l in HR15DE leads to squeezing out the seals. Always check the table above!
  • 🚫 Ignore filter: Oil filter 15208-9F60A needs to be changed with every replacement. Its resource is 8,000–10,000 km, even if the oil is “still good.”
  • 🚫 Cork retightening: Drain plug tightening torque - 35–40 Nm. Exceeding will lead to stripping of the threads in the aluminum pan.
  • 🚫 Mixing oils: Adding oil of a different viscosity or brand may cause coagulation of additives and clog the oil receiver.

Pay special attention engine flushing. In motors HR carbon deposits accumulate in the system channels VVL. If you are switching from mineral oil to synthetic oil, use a flush Liqui Moly Pro-Line (article 1998) - it dissolves deposits without the risk of clogging the oil channels.

Another typical problem is oil leak after change. In 80% of cases, this is due to improper installation of the filter (not lubricated sealing ring) or misalignment of the drain plug gasket. Always apply a thin coat of oil to the rubber filter ring before installation.

What happens if you fill in the wrong type of oil?

Using oil with viscosity 10W-40 instead of recommended 5W-30 in HR16DE will lead to:

1. Increased load on the oil pump (risk of wear).

2. Increased friction in cold weather (up to +5°C), which reduces the life of the timing chain.

3. Formation of varnish deposits on the piston rings due to insufficient fluidity.

In hybrid versions (e-Power) Unsuitable oil can cause problems with the energy recovery system.

Step-by-step instructions for changing the oil yourself

Changing the oil in Nissan Note does not require special skills, but it is important to follow the algorithm. Here are detailed instructions taking into account the nuances of the model:

  1. Preparation: Place the car on flat surface (better - on an overpass or lift). Stop the engine and let it cool for 10-15 minutes.
  2. Oil drain: Unscrew the drain plug (key 14) and drain the oil into a container with a volume of at least 5 liters. Wait until the oil stops dripping (at least 10 minutes).
  3. Filter replacement: Remove the oil filter (you can use a puller or pierce it with a screwdriver). Before installing a new filter (15208-9F60A) Lubricate the O-ring with fresh oil.
  4. Fill: Add through the filler neck 80% of the required volume (for example, 3.4 l for HR15DE). Start the engine for 30 seconds, then add oil to the level MAX.
  5. Check: Test drive for 5-10 km, then recheck the level. Add oil if necessary.

⚠️ Attention: In engines HR16DE may light up after changing the oil check engine with code P0011 (system malfunction VVL). This is due to air getting into the hydraulic compensators. To resolve the error, warm up the engine to operating temperature and let it idle for 5-7 minutes.

If you are using flushing oil, ensure its compatibility with the base oil. For example, flushing Liqui Moly Oil-Schlamm-Spulung incompatible with ester based oils (e.g. Motul 8100 X-cess).

💡

After changing the oil in Nissan Note Be sure to reset the maintenance counter through the on-board computer menu: Settings → Maintenance → Reset.

Features of oil change in hybrid versions (e-Power)

Hybrid versions Nissan Note e-Power have a number of differences in the lubrication system:

  • 🔋 The engine operates in a gentle mode: The electric motor takes on the main load, so the oil retains its properties longer. However, the replacement interval remains the same - 15,000 km.
  • 🔋 Special oil: Approved oil required ILSAC GF-6 and viscosity 0W-20. Usage 5W-30 will lead to an increase in fuel consumption by 3–5%.
  • 🔋 Smaller volume: B HR12DE for e-Power is poured 2.9 l (versus 2.7 liters in the regular version) due to a modified sump.
  • 🔋 Additional filter: The system has fine oil filter (article 15240-1M00A), which changes every 30,000 km.

⚠️ Attention: In hybrid versions prohibited use oils with molybdenum (for example, Castrol Edge with technology Titanium FST). Molybdenum additives may interfere with the crankshaft position sensor, resulting in failure of the start-stop system.

After changing the oil in e-Power be sure to follow battery calibration. To do this:

  1. Turn off the engine.
  2. Press the brake pedal and hold it for 10 seconds.
  3. Turn on the ignition (without starting the engine) and wait 3 minutes.

FAQ: Frequently asked questions about oil in Nissan Note

Can I use 5W-40 oil instead of 5W-30?

No, for most engines Nissan Note oil 5W-40 not recommended. An exception is engines with mileage over 200,000 km, where temporary use is allowed 5W-40 with a high content of detergent additives (for example, Total Quartz 9000 Energy). However, even in this case, the next replacement must be carried out after 7,000–8,000 km.

How much oil should I fill if there is no data on my modification?

If your version Nissan Note not listed in the table (for example, export models for Asia), use the universal rule:

  • For engines 1.2–1.4 l — 2.7–3.0 l.
  • For engines 1.5–1.6 l — 3.4–4.3 l.

The exact volume can be determined experimentally: fill in 80% of the expected volume, then top up to the level MAX on the dipstick.

What should I do if the pressure light comes on after changing the oil?

If the oil pressure light comes on (red oil can), follow these steps:

  1. Stop the engine immediately.
  2. Check the oil level - if it is lower MIN, top up.
  3. Make sure the oil filter is installed correctly (there are no leaks around it).
  4. If the lamp continues to light, check oil pressure sensor (located next to the oil filter). It often becomes clogged with dirt after washing.

If the problem persists, do not start the engine - contact a service center to diagnose the oil pump.

What kind of oil should I fill in a Nissan Note with LPG?

For Nissan Note with gas-cylinder equipment (GBO) requires oil with high ash content and thermal-oxidative stability. Recommended options:

  • Liqui Moly Leichtlauf High Tech 5W-30 (article 3709).
  • Motul Specific DEXOS2 5W-30 (article 104397).
  • Castrol Magnatec Stop-Start 5W-30 (article 15669A).

The oil change interval when using LPG is reduced to 10,000 km due to the increased combustion temperature of the gas.

Is it possible to mix oils from different brands?

Mix oils of different brands in Nissan Note only allowed as a last resort (for example, when topping up on the road). In this case:

  • Both oils must have same viscosity (For example, 5W-30).
  • Don't mix synthetics with mineral water or semi-synthetic.
  • After mixing, change the oil as soon as possible - after 3,000–5,000 km.

The ideal option is to take it with you liter canister the same oil that is poured into the engine.