Nissan Juke is one of the most recognizable crossovers on the market, and its front end plays a key role in this image. A bold design with aggressive lines, non-standard optics and a massive radiator grille makes the model unique. If you are looking photo Nissan Juke front, you want to understand the features of its front part or are planning tuning - this article will help you sort everything out.

We will analyze the design of each generation, look at technical details (from headlights to bumpers), and also give practical advice on care and modifications. We will pay special attention differences between restyled versions and how to recognize original parts when buying a used car. Are you ready? Then let's begin!

Evolution of front end design Nissan Juke: F15 to F16

First generation Nissan Juke (codename F15, 2010–2019) became a revolution in the class of subcompact crossovers. Its front part immediately caught the eye thanks to:

  • 🔴 Round headlights with an unusual location - the main unit is closer to the center, and the turn signal is located on the edge.
  • 🔘 Massive radiator grille in the shape of a trapezoid, stylized as sports models Nissan.
  • 🚗 Aggressive bumper with integrated fog lights and plastic trims.

In 2014, the first restyling took place: the shape of the headlights changed (they became more elongated), LED running lights appeared, and the radiator grille received chrome inserts. Second generation (F16, since 2019) has radically changed the concept: the front part has become more angular, with narrow headlights and a huge grille reminiscent Nissan GT-R.

Fun Fact: Front End Design Juke F16 was developed taking into account aerodynamics - the drag coefficient decreased by 13% compared to the F15.

📊 Which generation of Nissan Juke do you like best?
  • First (F15, 2010–2019)
  • Second (F16, since 2019)
  • Both are the same
  • I don't like any of them

Headlights Nissan Juke front: types, features and problems

Headlights are the “eyes” of a car, and Juke they were always one of the main highlights. Let's look at them in more detail:

Generation Headlight type Features Typical problems
F15 (dorestyle) Halogen/Xenon (optional) Round shape, separate turn signal unit Cloudy glass, burnt out H7 lamps
F15 (restyle) Halogen/LED DRL More elongated shape, LED running lights Failure of LEDs, condensation
F16 Full LED (optional) Narrow headlights with boomerangs, adaptive light High cost of replacement, problems with the ignition unit

Owners Juke F15 often encounter dim headlights due to low quality plastic. The solution is polishing or replacing the glass. B F16 the main headache is cost of LED headlights (from 40,000 rubles for the original). An alternative is high-quality analogues from Depo or TYC, but their connection may require modifications.

⚠️ Attention: When replacing headlights with Juke F16 with adaptive light be sure to carry out calibration at a service station - otherwise the light beam will hit the wrong place.

Radiator grille: materials, modifications and tuning

Radiator grille in Nissan Juke is not just a design element, but also a functional detail. B F15 it was made of plastic with chrome inserts, and in F16 has become more massive, with a 3D effect. Let's look at the key points:

  • 🔄 Standard grille — plastic, resistant to corrosion, but prone to scratches.
  • 💎 Chrome options — look luxurious, but require careful care (wash only with a soft sponge!).
  • 🖤 Blackened grilles - a popular tuning for the "stealth" style, but can heat up in the sun.
  • 🔧 Mesh gratings - improve cooling, but require frequent cleaning from insects.

If you are planning grille tuning, please note:

- For F15 lattices from Nismo or Stillen (price from 15,000 rubles).

- B F16 you can install a grille from Nissan Ariya (Modification of fastenings will be required).

- Painting the grille in body color is a budget option (from 3,000 rubles in the studio).

Make sure the part is compatible with your Juke|

Check the condition of the fasteners (for cracks)|

Order a 3D model for fitting (if you plan to customize)|

Prepare tools: plastic spatulas, Torx keys T20/T25

-->

Bumper Nissan Juke front: design and weak points

Front bumper Juke performs not only an aesthetic, but also a protective function. B F15 it consisted of three parts: the main plastic body, an energy-absorbing insert and plastic “antennae” on the sides. B F16 the design has become more monolithic, but new vulnerabilities have appeared.

Typical bumper problems:

  • 🚗 Cracks at fastening points - especially relevant for F15 after 2015 (plastic became thinner).
  • 💥 Chipping when parking — due to the low ground clearance (170 mm), the bumper often suffers from curbs.
  • 🔥 Melting plastic - if cheap LED lamps with poor heat dissipation are installed.

If the bumper is damaged, do not rush to replace it. In many cases it helps:

- Welding plastic (cost from 2,000 rubles).

- Setting up protection (for example, steel plate from Rally Armor).

- Painting in body color with preliminary fiberglass reinforcement.

⚠️ Attention: When replacing the bumper with Juke F16 check system compatibility ProPILOT — some non-original bumpers block the operation of radars!
How to remove the front bumper on Juke F15?

1. Unscrew the 4 bolts under the hood (Torx T20 wrench).

2. Remove the clips in the wheel arches (you will need a plastic spatula).

3. Disconnect the fog lights and parking sensor connectors.

4. Gently pull the bumper towards you, starting from the right edge.

Important! Do not pull on the bars - they are attached separately!

Fog lights and additional optics

Fog lights (PTF) in Nissan Juke - an option, but their absence can be compensated for by tuning. B F15 PTFs were installed in the bumper, in F16 they were moved to the lower part of the headlights (in the version with LED optics).

Upgrade options:

  • 💡 Installation of LED PTFs - for example, Osram LEDriving FOG (luminous flux 1200 lm).
  • 🔦 Daytime running lights (DRL) - can be integrated into the grille or bumper.
  • 🚨 Additional LED strips — mounted under the bumper to illuminate the road.

When choosing PTF, pay attention to:

- Certification (must be marked E or SAE).

- Color temperature — optimally 3000–4500K (yellow light penetrates fog better).

- Luminous angle - must be wide (at least 60°).

💡

Before installing PTFs, check their compatibility with the on-board computer Juke. Some models may give an error Check Front Fog Lamp when using LED lamps.

How to recognize original front end parts?

When buying used Nissan Juke or spare parts, it is important to be able to distinguish the original from the replica. Here are the key signs:

Detail Original Replica
headlight Marking Nissan on glass, uniform light Blurred inscriptions, yellow plastic
Radiator grille Clear lines, no burrs, magnetic (if metal) Rough edges, brittle plastic
Bumper Smooth joints, stainless steel fastenings Gaps between parts, rusty bolts

Check also:

- Part number - must match the directory Nissan (for example, a headlight for Juke F15 has an article number 26010-JM00A).

- Packaging — the original comes in a branded box with a hologram.

- Price — if a part is 30%+ cheaper than the market, this is a reason to be wary.

💡

The most reliable way to check the originality of a part is to compare its VIN code with the database Nissan through the service Nissan Connect or from an authorized dealer.

Front end tuning Nissan Juke: from vinyls to splitters

Front end tuning Juke allows you to make your car unique. Here are the popular destinations:

1. Vigny (films):

  • 🎨 Matte or glossy film for the hood/roof (price from 5,000 rubles).
  • 🖤 Chrome blackening - grille, moldings, handles.
  • 🌈 Colored accents - for example, orange stripes on the bumper (as in the version Nismo).

2. Aerodynamic elements:

  • 🚀 Splitter - improves downforce (suitable for F16 with package Nismo).
  • 💨 Channels on the hood - decorative or functional (for cooling).
  • 🛡️ Bumper protection - aluminum or carbon fiber linings.

3. Optics:

  • 💡 "Angel Eyes" — LED rings in the headlights.
  • 🔥 Demon eyes — red LEDs inside the headlights (legality questionable!).

Before tuning, be sure to consult with a specialist - some modifications (for example, changing the height of the splitter) may affect aerodynamics and even guarantee (if the car is under warranty).

FAQ: Frequently asked questions about the front end Nissan Juke

Is it possible to install headlights from Juke Nismo to the regular version?

Yes, but the wiring will need to be modified (in Nismo other connectors for LED optics are used). You may also need to reflash the light control unit. The cost of work is from 10,000 rubles.

Why on Juke F16 Do your headlights sweat often?

This is a typical problem due to poor ventilation. Solution:

  1. Check ventilation valves (they are located behind the headlight).
  2. Dry the headlight construction hairdryer (temperature no higher than 60°C!).
  3. If it doesn't help, replace it sealant or the headlight itself.

What glue should I use to repair a cracked bumper?

Best fit two-component adhesive for plastic (For example, 3M Scotch-Weld DP8005 or Loctite Plastics Bonding System). Before gluing it is necessary clean and degrease surface!

Is it possible to paint the radiator grille to match the body color yourself?

Yes, but you will need:

  • Remove the grille (instructions are in section about the bumper).
  • Use primer for plastic (For example, Plasti Dip).
  • Apply paint in 2-3 layers and let dry.
  • Cover matte or glossy varnish.

Important! Do not paint chrome elements without first matting - the paint will not stick.

What kind of bulbs are in the headlights? Juke F15 by default?

In the basic configuration:

  • Low/high beam: H7 (halogen, 55W).
  • Turn signal: PY21W (orange lamp).
  • Fog lights: H11 (if installed).

To replace with LED we recommend Philips X-tremeUltinon or Osram Night Breaker Laser.