Nissan Tiida cigarette lighter fuse: location, replacement and diagnostics

If in your Nissan Tiida The cigarette lighter has stopped working, the culprit is most often a blown fuse. This problem is relevant for all generations of the model - from C11 (2004–2012) to C13 (2012–2019). The reasons may be different: from a short circuit in the socket to the connection of powerful devices (for example, a compressor or a DVR with an abnormal power supply).

Unlike many modern cars, where the cigarette lighter is protected by a separate relay, in Tiida its circuit is usually tied to a common fuse block. You can find and replace it yourself - without a visit to the service center. The main thing is to know exact fuse location diagram depending on the year of manufacture and configuration. In this article, we will look at where to look for a fuse, how to check it, and what nuances to consider when replacing it.

Where is the cigarette lighter fuse located in Nissan Tiida?

B Nissan Tiida The cigarette lighter fuse is located in main fuse box, which is located inside the car. The exact location depends on the generation:

• 🔧 Tiida C11 (2004–2012) — The fuse box is hidden under the glove compartment (on the passenger side). To gain access, you need to unlatch the latches and lower the glove compartment down.
• 🔧 Tiida C13 (2012–2019) — the block has been moved under the steering column, to the left of the pedals. The block cover is secured with latches and can be easily removed by hand.

In both cases the cigarette lighter fuse is marked as CIGAR or PWR OUTLET (depending on the supply market). Fuse rating - 15A (yellow). In some configurations (for example, with an additional socket in the trunk), a separate fuse may be installed on 20A (yellow with transparent body).

To avoid confusion, refer to the diagram printed on the inside of the block cover. If the inscriptions are erased, use a flashlight - the markings are usually duplicated on the plastic body of the unit.

Fuse box diagram: where to look CIGAR

Below is a table with the location of the cigarette lighter fuse for different versions Tiida. Please note: in some versions (for example, for the Japanese market), the designations may differ.

Generation	Fuse designation	Denomination (A)	Location in the block
Tiida C11 (2004–2007)	CIGAR or F18	15	Top row, 3rd from left
Tiida C11 (2008–2012)	PWR OUTLET or F20	15 (sometimes 20)	Bottom row, 5th from left
Tiida C13 (2012–2015)	CIGAR or F25	15	Middle row, 2nd from right
Tiida C13 (2016–2019)	ACC SOCKET or F28	20	Top row, 4th from left

If your model is not included in the table, check the markings on the unit cover. As a last resort, you can use the elimination method: the cigarette lighter fuse always has a rating 15A or 20A and is located next to the audio system fuses (AUDIO) or dashboard (METER).

⚠️ Attention: In some restyled versions Tiida C13 (for example, for the Mexican market) the cigarette lighter fuse can be combined with the socket fuse 12V in the trunk. In this case, its denomination increases to 25A.

How to check the cigarette lighter fuse: 3 ways

Before replacing the fuse, make sure that this is the problem. Here are three reliable verification methods:

1. Visual inspection. Remove the fuse and look at the metal jumper inside. If it is burned out (broken), the fuse must be replaced. B Tiida fuses are used ATO — their body is transparent, so diagnostics are not difficult.
2. Check with a multimeter. Switch the tester to continuity mode (or resistance measurement) and touch the fuse contacts with the probes. If the resistance tends to infinity, the fuse has blown.
3. Replace with a known good one. Take a fuse with the same rating from another socket (for example, from the heated seats or radio) and install it in place of the suspect. If the cigarette lighter works, the problem is confirmed.

If the fuse is intact but the cigarette lighter does not work, check:

• 🔌 Socket contacts - they often oxidize or burn due to poor connections.
• 🔌 Wiring - there may be a break or short circuit in the circuit.
• 🔌 Relay (if any) - in some trim levels Tiida The cigarette lighter is controlled via a relay K30.

Step-by-step instructions for replacing the fuse

Replacing the fuse in Nissan Tiida takes no more than 5 minutes. You will need:

• 🔧 Flat screwdriver (for removing the block cover).
• 🔧 New fuse on 15A or 20A (depending on model).
• 🔧 Flashlight (optional, for convenience).

Sequence of actions:

1. Turn off the ignition and remove the key from the lock. This will prevent short circuits when manipulating the block.
2. Remove the fuse box cover (on Tiida C11 - lower the glove compartment to C13 - release the latches under the steering wheel).
3. Locate the cigarette lighter fuse according to the diagram (see table above).
4. Remove the blown fuse using plastic tweezers (usually attached to the block cover). If you don't have tweezers, you can carefully pry the fuse off with a screwdriver.
5. Install a new fuse same denomination. Using a fuse with a large amperage may cause a fire in the wiring!
6. Close the unit cover and check the operation of the cigarette lighter.

⚠️ Attention: If a new fuse blows immediately after installation, this indicates short circuit in the circuit. In this case, do not try to install the fuse again - contact an auto electrician to diagnose the wiring.

Common mistakes when replacing a fuse

Even something as simple as replacing a fuse can be done incorrectly. Here are the most common mistakes owners make Nissan Tiida:

• ❌ Using a fuse of the wrong rating. For example, setting 20A instead of 15A may cause the socket contacts to melt.
• ❌ Replacing only the fuse without checking the cause of the blown. If the circuit is shorted (for example, due to a metal object falling into the socket), the new fuse will blow immediately after installation.
• ❌ Ignoring oxidized contacts. Even after replacing the fuse, the cigarette lighter may not work properly if the socket contacts are dirty.
• ❌ Use of force when removing the fuse. The plastic latches of the block are fragile - they can easily be broken if you pull the fuse carelessly.

Another typical problem is confusion with fuses. For example, in Tiida C13 next to CIGAR fuse is often located ACC (responsible for power supply when the ignition is off). It's easy to confuse them, especially if the markings are worn off. Always check the diagram!

What should I do if the fuse blows again?

If the new fuse blows immediately after installation, there is a short circuit in the circuit. Possible reasons:

- The insulation of the wires under the dashboard is damaged.

- Metal debris (coins, paper clips) got into the cigarette lighter socket.

- The cigarette lighter itself is faulty (short circuit inside the housing).

- Problems with the relay (if it is included in your configuration).

In this case, a complete electrical diagnostic is required, which is best left to a professional.

How to extend the life of a cigarette lighter fuse

To avoid frequent fuse blowing, follow these guidelines:

• 🔋 Do not connect devices with a consumption of more than 10A. Maximum power for cigarette lighter socket in Tiida — 120–150 W. It is better to connect compressors, powerful inverters and car vacuum cleaners directly to the battery.
• 🔋 Use quality splitters. Cheap tees often cause short circuits due to poor contacts.
• 🔋 Clean the cigarette lighter socket regularly. Dust and oxidation impair contact, leading to overheating and blown fuse.
• 🔋 Do not leave devices in the slot for long periods of time. Even when turned off, some gadgets (for example, recorders) continue to consume current.

If you often use the cigarette lighter to connect additional equipment (such as a refrigerator or laptop charger), consider installing additional socket with separate fuse. This will reduce the load on the standard circuit and extend the life of the car's electrical system.

FAQ: Frequently asked questions about the cigarette lighter fuse in Nissan Tiida

Can I use a 20A fuse instead of a 15A fuse?

No, it's dangerous. fuse on 15A designed for the maximum load of the cigarette lighter circuit. Installing a fuse with a large rating can lead to melted wiring or even a fire. If a standard fuse frequently blows, look for the cause (short circuit or overload) rather than increasing the rating.

Where to buy a fuse for Tiida?

Fuse type ATO (15A or 20A) are sold at any auto store, gas stations or online stores (for example, Exist.ru, Autodoc). Cost - from 10 to 50 rubles per piece. For Tiida standard fuses fit Littlefuse or Bussmann.

Why does the fuse burn out immediately after replacement?

This indicates short circuit in the chain. Possible reasons:

• The insulation of the wires under the dashboard is damaged.
• A metal object (coin, paperclip) got into the cigarette lighter socket.
• The cigarette lighter itself is faulty (short circuit inside the housing).

In this case, diagnostics by an auto electrician is required.

Is it possible to drive without a cigarette lighter fuse?

Technically yes, but it is extremely unsafe. Without a fuse, the cigarette lighter circuit remains unprotected from overloads. A short circuit can cause the wiring to burn out or even the interior to catch fire. If the fuse frequently blows, it is better not to use the cigarette lighter temporarily until the cause is eliminated.

Which fuse is responsible for the cigarette lighter in a Tiida with a diesel engine?

In diesel versions Nissan Tiida (For example, 1.5 dCi) the fuse circuit is similar to gasoline models. The cigarette lighter fuse is still identified as CIGAR or PWR OUTLET and has a face value 15A. An exception is models with a factory heated fuel filter, where an additional fuse can be installed on 10A in the same block.