Oil filter <em>Nissan Teana</em>: how to choose, change and not damage the engine

Nissan Teana is a business sedan that is valued for its reliability and comfort, but even it requires regular maintenance. One of the critical elements of the lubrication system is oil filter - a detail that is often underestimated, although the life of the engine depends on its quality. In this article we will look at which filter is suitable for Teana J31 (2003–2008) and J32 (2008–2014), how to replace it correctly, and why saving on it can result in a major overhaul.

We analyzed technical documentation, owner reviews and service center recommendations to create the most complete guide possible. Here you will find article numbers of original filters and proven analogues, step-by-step instructions for replacement, as well as unique data on the compatibility of filters with different types of oils (synthetic, semi-synthetic, mineral water). If you plan to service the car yourself, this material will help you avoid common mistakes that shorten the life of the engine. VQ25DE or QR25DE.

Original oil filters for Nissan Teana: articles and features

The manufacturer recommends using only original filters, and there are reasons for this. It's not about marketing, but about precise calculations: original filters Nissan are tested for compatibility with oils that the company pours into engines on the assembly line. For Teana Two main articles are suitable:

• 🔧 15208-9F600 - for models J31 (2003–2008) with engines VQ25DE And VQ35DE. It has an increased area of ​​the filter element, which is important for engines with high mileage.
• 🔧 15208-9F60A - for J32 (2008–2014) from QR25DE And VQ35DE. Features a modified non-return valve that prevents dry friction during startup.

Both filters are equipped anti-drainage valve made of silicone, which retains elasticity longer compared to rubber counterparts. This is especially important in cold climates where oil thickens at low temperatures. The original filters also use synthetic filter material with impregnation that traps particles up to 10 microns in size.

The cost of original filters in 2026 ranges from 800 to 1,200 rubles, depending on the region and the dealer’s markup. They can be ordered by catalog numbers through official distributors Nissan or trusted online stores (for example, exist.ru, emex.ru).

Analogs of original filters: what to choose and what to pay attention to

If the original filter is not available or its price seems too high, you can consider analogues from trusted brands. The main thing is to make sure that they meet two key parameters:

1. Size and thread - must match the original (thread M20x1.5, case diameter 65–67 mm).
2. Filter element quality - give preference to brands that use synthetic fiber (for example, Mann, Bosch, Fram).

The table below shows the best analogues, confirmed by owner reviews. Teana and service centers:

Brand	Article	Compatibility	Features	Price, ₽
Mann	W 610/3	J31, J32 (all engines)	Reinforced body, long service life (up to 15 thousand km)	500–700
Fram	PH7317	J31 (VQ25DE/VQ35DE)	Anti-drain valve made of nitrile rubber	450–600
Bosch	0 451 103 336	J32 (QR25DE/VQ35DE)	Increased dirt holding capacity, suitable for synthetics	600–800
SCT	SM 101	J31, J32 (budget option)	Average quality, resource up to 10 thousand km	250–350

⚠️ Attention: Cheap filters (for example, NIPparts or no-name Chinese brands) often have cardboard filter element, which gets wet with prolonged use. This leads to particles getting into the oil and accelerated wear. timing chains And hydraulic compensators.

If you are using synthetic oil (For example, Mobil 1 5W-30 or Liqui Moly 5W-40), give preference to filters with metal body (For example, Mann W 610/3). They better withstand high temperatures and aggressive synthetic additives.

When and how often to change the oil filter Nissan Teana

The manufacturer recommends changing the oil and filter every 15,000 km or once a year, whichever comes first. However, this interval is only relevant for ideal operating conditions:

• 🛣️ Driving on the highway at an average speed of 80–100 km/h.
• 🌡️ Ambient temperature from –10°C to +30°C.
• ⛽ Fuel not lower AI-95 with octane number according to the research method.

In reality the majority Teana are used in the city, where traffic jams, frequent engine starts and low quality gasoline reduce oil life. In such conditions, the filter clogs faster and needs to be changed every 10,000 km.

There are other factors that require early replacement:

• 🔥 Engine overheating (oil temperature above 120°C) - leads to degradation of the filter element.
• 💨 Driving on dusty roads — increases the load on the filter due to the ingress of abrasive particles.
• 🛢️ Mixing oils different brands or types (for example, synthetics + semi-synthetics).

Step-by-step instructions for replacing the oil filter with Nissan Teana

Replacing the filter is a procedure that you can perform yourself if there is a hole or a lift. You will need:

• 🔧 Oil filter puller (for example, cup-shaped or belt).
• 🛢️ New oil (volume depends on the engine: 4.3 l for QR25DE, 4.8 l for VQ35DE).
• 🔩 Key on 14 mm for the drain plug.
• 🧴 Flushing fluid (optional if the oil is very dirty).

Replacement algorithm:

1. Warm up the engine to operating temperature (50–60°C) so that the oil becomes less viscous.
2. Raise the car on a jack or drive it into a pit. Place a container to drain the oil.
3. Drain the old oil, unscrewing the plug on the pallet with a key on 14 mm.
4. Remove the old filter puller If it is stuck, you can carefully pierce it with a screwdriver and turn it.
5. Install a new filter, having previously lubricated the rubber seal with fresh oil.
6. Screw the filter on by hand until it stops, then tighten it ¾ of a turn (do not overtighten!).
7. Fill with new oil, check the level with a dipstick and run the engine for 1-2 minutes to fill the filter.

⚠️ Attention: If after replacement the oil pressure light comes on and does not go out for more than 5 seconds, turn off the engine immediately! This could mean:

• Insufficient oil level.
• Faulty check valve in the filter (oil flows into the pan).
• Oil passages are clogged (flushing is required).

Typical mistakes when replacing a filter and their consequences

Even experienced car owners sometimes make mistakes that lead to serious damage. Here are the most common:

• 🔧 Filter reupholstery — leads to deformation of the rubber gasket and oil leaks. Optimal tightening torque: 18–22 Nm.
• 🛢️ Using old oil - even if it looks clean, wear products remain in it.
• 🔩 Unlubricated gasket — without oil, the rubber sticks to the block, and the next time you change the filter it will be difficult to unscrew.
• 🌡️ Replacement without warming up the engine — the cold oil is not completely drained, the residues are mixed with new oil.

One of the most dangerous mistakes is Using the wrong size filter. For example, if you install a filter from Nissan Almera (article 15208-9F601) on Teana J32, it will not fit tightly to the block, which will lead to a drop in oil pressure and rotation of the liners.

Another problem - fake filters. They can be recognized by:

• Uneven threads or corrosion on the body.
• Lack of brand logo on packaging.
• Too light weight (the original weighs ~200 g).

What happens if you don't change the oil filter?

When the filter is clogged, the bypass valve opens and uncleaned oil enters the engine. This leads to accelerated wear camshafts, piston rings And turbines (on models with VQ35DE). In critical cases it is possible engine wedge due to lack of lubrication.

Compatibility of oil filters with different types of oils

Not all filters work equally well with different types of oils. For example, synthetic oil more aggressive towards filter materials due to the high content of detergent additives. The table below contains compatibility recommendations:

Oil type	Recommended filter	Notes
Synthetics (5W-30, 5W-40)	Mann W 610/3, Bosch 0 451 103 336	Resistant to high temperatures and oxidation.
Semi-synthetic (10W-40)	Fram PH7317, original 15208-9F60A	They filter soot and combustion products well.
Mineral water (15W-40)	SCT SM 101 (budget), Nissan 15208-9F600	Less demanding on filter quality, but lower resource.

If you are switching from mineral oil to synthetic oil, be sure to flush the system special liquid (for example, Liqui Moly Oil-Schlamm-Spulung). This will remove deposits that could clog the new filter.

Where to buy an oil filter for Nissan Teana: verified sources

It is better to buy filters in specialized stores or from official dealers. Avoid markets and dubious online sites where there is a high risk of running into a fake. Here are reliable options:

• 🏢 Official dealers Nissan — guarantee of the original product, but the price is higher than the market price.
• 🌍 Online stores:
  • exist.ru — wide range, authenticity check.
  • emex.ru — there are often discounts on original spare parts.
  • autodoc.ru — convenient selection by VIN code.
• 🔧 Service centers - some offer filters at wholesale prices (for example, networks Bosch Service or Mobil 1 Center).

When purchasing, be sure to check:

• 📦 Packaging - must be solid, with a hologram (on original filters Nissan).
• 🏷️ Article - compare with the data from this article.
• 🔍 Filter element — for high-quality filters it is yellow or orange (synthetic fiber).

⚠️ Attention: On Avito And Yule They often sell filters at a reduced price, passing them off as original. The risk of running into a fake there is ~40%.

FAQ: Frequently asked questions about oil filters for Nissan Teana

Is it possible to use an oil filter from Nissan X-Trail on Teana?

No, you can't. Filters for X-Trail (for example, article 15208-9F601) have a different diameter and thread (M22x1.5 instead of M20x1.5). Their installation will lead to oil leaks and a drop in pressure in the system.

How often should I change the filter if I only drive on the highway?

For predominantly highway driving (more than 80% of the mileage), the filter can be changed once every 12–15 thousand km, but not less than once a year. However, if you use synthetic oil with long drain interval (For example, Mobil 1 Extended Performance), it is still recommended to update the filter every 10 thousand km, since its resource is limited.

What happens if you install a filter without an anti-drainage valve?

When the engine is stopped, oil from the filter and oil channels will drain into the pan. The next time the pump is started, it will take a few seconds to prime the system, causing dry friction in the first moments of work. This is especially dangerous in winter when the oil thickens. In the long term, this reduces resource camshafts And crankshaft.

Can the oil filter be washed and reused?

No, this is strictly prohibited. The filter element becomes clogged with microparticles that cannot be removed by washing. In addition, rubber seals and valves lose their elasticity after the first use. Re-installation will result in:

• Loss of oil pressure.
• Dirt getting into the engine.
• Filter element rupture.

Which filter is better? Mann or Bosch?

Both brands produce high-quality filters, but there are nuances:

• Mann W 610/3 has a larger filtration area and is better suited for long replacement intervals (up to 15 thousand km).
• Bosch 0 451 103 336 features a more reliable check valve, which is important for cold starts.

If you live in a region with frosty winters, it is preferable Bosch. For hot climates or aggressive driving - Mann.