Replacing wipers with Nissan Sunny FB15 (2010–2017 model years) is a task that every owner of this sedan faces. It would seem that it could be simpler: I removed the old brushes, bought new ones and installed them. But in practice, car owners often make mistakes: they buy wipers of the wrong size, choose low-quality materials or install them incorrectly, which leads to poor glass cleaning, squeaks and even damage to the wiper mechanism.

In this article we will not only provide exact dimensions of wipers for Nissan Sunny FB15 depending on the year of manufacture and configuration, but we will also look at the nuances of choice: which brands are trustworthy, how to distinguish original blades from fakes, and why cheap wipers can cost more in the long run. You will also find step-by-step replacement instructions, care tips and answers to frequently asked questions that owners of this car have.

Official wiper sizes for Nissan Sunny FB15

Manufacturer Nissan sets to Sunny FB15 Windshield wiper blades are standard sizes, but there are nuances depending on the market and equipment. For example, cars for the Japanese domestic market (JDM) may have wipers 1–2 cm shorter than export versions. Below is a table with current sizes for most modifications:

Wiper position Size (length in cm) Notes
Driver's side 60 cm On some versions for Asia - 58 cm
Passenger side 40 cm Options with 38 cm are rare (check before purchasing!)
Rear wiper (if installed) 30 cm Only for versions with rear wiper (optional for some markets)

⚠️ Attention: If your Sunny FB15 imported from Japan, be sure to check the dimensions using the VIN code or measure the old brushes with a tape measure. Japanese versions are often equipped with wipers 1–2 cm shorter than their European or American counterparts.

To accurately determine the size, you can use spare parts catalog Nissan by VIN code. For example, original brushes for the driver's side have the article number 28540-4M000 (60 cm) or 28540-4M001 (58 cm). The passenger brush usually goes under the number 28541-4M000 (40 cm).

📊 How often do you change the wipers on your car?
  • Every season (spring/autumn)
  • Once a year
  • Only when they stop cleaning
  • Never changed

How to properly measure your wipers yourself

If you are unsure of the size or are purchasing aftermarket blades, it is best to measure your old wipers before purchasing. Here's how to do it right:

  1. Remove the brush from the windshield wiper lever. To do this, press the latch (usually it is located at the mounting location) and pull the wiper down.
  2. Place the brush on a flat surface (for example, a table) and straighten it. You need to measure by rubber part, and not on a plastic frame.
  3. Use a metal tape measure or ruler. Measure from edge to edge of the rubber band, do not include the plastic plugs in your measurement.
  4. Round the result to the nearest standard size (for example, 59 cm → 60 cm).

⚠️ Attention: Some manufacturers indicate the wiper size according to total frame length, not the rubber part. This may result in an error of 2-3 cm. Always check with the seller exactly what was measured.

If you do not have the opportunity to remove the brush, you can measure it directly on the car:

  • 📏 Take a flexible tailor's tape (used in sewing) and circle the rubber part of the wiper with it.
  • 🔍 Or make marks with a marker on the glass along the edges of the brush, then measure the distance between them.

💡

If you're purchasing wipers online, check reviews for sizing accuracy with the specific retailer. Some Chinese brands indicate sizes with an error of ±3 cm!

Which wipers are better to choose for Nissan Sunny FB15: review of options

The market offers a huge selection of windshield wiper blades - from budget to premium. Let's figure out which ones are suitable for Sunny FB15 best, taking into account climatic conditions and intensity of use.

1. Original Nissan wipers

Pros:

  • 🔹 Perfect in size and fastening.
  • 🔹 Long service life (with proper care - up to 2 years).
  • 🔹 Optimal fit to the glass thanks to the original shape of the frame.

Cons: High price (from 1,500 to 3,000 rubles per set).

2. Premium brands: Bosch, Valeo, Denso

These manufacturers supply brushes to many automakers, including Nissan. Their products are often not inferior to the original, but are 20–30% cheaper. For example:

  • 🔧 Bosch Aerotwin — frameless wipers with an aerodynamic profile. Work well at high speeds.
  • 🔧 Valeo Silencio X-TRM — with graphite coating for silent operation.
  • 🔧 Denso Hybrid — hybrid brushes combining frame and frameless technologies.

3. Budget options: SWF, Champion, LYNXauto

Suitable if you drive little or are willing to change your wipers once a year. Price - from 300 to 800 rubles per set. The main disadvantage: the rubber band quickly becomes dull in the cold or cracks in the sun.

⚠️ Attention: Cheap wipers from aliexpress (price up to 200 rubles) often have non-standard fasteningwhich is not suitable for Nissan Sunny FB15. Before purchasing, check compatibility using the article number or photo of the mount.

Check exact size (driver/passenger side)

Check the type of fastening (for FB15 - usually “hook” or “side pin”)

Pay attention to the rubber material (optimally - natural rubber or silicone)

View reviews about working in winter conditions (if relevant)

-->

Types of wiper mounts: which one is suitable for Sunny FB15

One of the most common mistakes when buying wipers is the wrong choice. fastening type. On Nissan Sunny FB15 mount is used U-hook or Side pin, depending on the year of manufacture. Here's how to tell them apart:

Mounting type Description Suitable for FB15?
U-hook Classic "U" shaped mount. The brush is placed on top of the lever. Yes, for most versions
Side pin Fastening with side lock. The brush snaps into place on the side. Yes, for 2014-2017 models.
Bayonet (bayonet) Fastening with cross pin. Often used on European cars. No

To accurately determine the type of mount on your vehicle:

  1. Raise the wiper arm perpendicular to the glass.
  2. Look at where the brush is attached. If a metal hook is visible there, this is U-hook. If there is a plastic retainer on the side, this is Side pin.
  3. Take a photo of the mount and compare it with the wiper manufacturer's catalog.

⚠️ Attention: If you are purchasing frameless wipers, check to see if there is an adapter for your mounting type. Many models (eg Bosch Aerotwin) are supplied with universal adapters.

What to do if the wiper does not fit properly?

If you have already purchased a brush with the wrong fastening, do not rush to return it. In most cases, you can purchase a separate adapter (costs 50–200 rubles). For example, for fastening Side pin on U-hook there is an adapter with the article number 3397006966 (Bosch). You can also contact a car service - specialists often have universal clamps in stock.

Step-by-step instructions for replacing wipers on a Nissan Sunny FB15

Replacing windshield wiper blades is a simple procedure that takes no more than 10 minutes. All you need are new wipers and a flathead screwdriver (in case the retainer gets stuck). Follow this instruction:

  1. Preparation:
    • 🚗 Park the car on a flat surface and turn off the ignition.
    • 🔧 Raise the wiper arm perpendicular to the windshield (service position). Don't force it - the lever should move smoothly.
  2. Removing the old brush:
    • 🔍 Press the latch (usually it is located at the bottom of the mount).
    • 🖐️ Pull the brush down and remove it from the lever. If the latch does not budge, carefully pry it off with a screwdriver.
  3. Installing a new brush:
    • 🔄 Combine the fastening of the new brush with the lever. Make sure that the latch clicks into place.
    • 🔍 Check that the brush is not loose and is securely fastened.
  4. Check:
    • 💧 Turn on the washer and check the operation of the wipers at different speeds. They should fit tightly to the glass and not leave streaks.

⚠️ Attention: Never turn on your wipers if there is ice or snow on them! This may damage the windshield wiper mechanism. In winter, before using the wipers, be sure to clear the ice from the glass with a scraper.

💡

If after replacement the wipers leave streaks, the cause may be poor-quality rubber or dirty glass. Try wiping the glass with alcohol and repeat the test.

Common mistakes when replacing wipers and how to avoid them

Even something as simple as replacing windshield wiper blades can turn into problems if mistakes are made. Here are the most common ones and ways to prevent them:

  • 🚫 Buying wipers of the wrong size. Consequences: the brush does not clean the edges of the glass or gets stuck on the body. Solution: Always check the size chart or measure your old wipers.
  • 🚫 Ignoring fastening type. Consequences: the brush does not lock or dangles. Solution: check the mount before purchasing (see section above).
  • 🚫 Dry installation of wipers. Consequences: the rubber wears out faster and squeaks appear. Solution: Before first use, wipe the brushes with a damp cloth.
  • 🚫 Using wipers to remove ice. Consequences: damage to rubber and mechanism. Solution: Always scrape the ice.
  • 🚫 Buying cheap wipers from Aliexpress. Consequences: poor cleaning, rapid wear, possible glass damage. Solution: choose proven brands (Bosch, Valeo, Denso).

Another common problem is uneven fit of the brush to the glass. This may happen due to:

  • 🔹 Deformation of the wiper lever (for example, after careless parking).
  • 🔹 Wear of the spring in the windshield wiper mechanism.
  • 🔹 Incorrect installation of frameless wipers (they require precise alignment).

If you notice that the wiper is "bouncing" or missing areas of glass, check:

  1. The evenness of the lever (it should be straight, without bends).
  2. Condition of the rubber band (are there any cracks or peelings).
  3. Presence of contaminants on the glass (resins, bitumen stains).

Caring for wipers: how to extend their service life

Even the best quality windshield wiper blades will not last long if they are not properly cared for. By following simple recommendations, you can extend the life of your wipers by 30–50%:

  • 💧 Wash your brushes regularly. Once a month, wipe them with a damp cloth and soapy water to remove dirt and resin. This will prevent streaks from occurring.
  • ☀️ Protect from the sun. Under direct rays, rubber dries out and cracks. When parking on the street, use a sun visor.
  • ❄️ Prepare for winter. Before frost, treat the rubber with silicone lubricant (for example, WD-40 Specialist Silicone). This will prevent it from freezing to the glass.
  • 🚿 Use a high-quality washer. Cheap liquids contain aggressive surfactants that destroy rubber. It is optimal to use concentrates from Liqui Moly or Sonax.
  • 🔧 Check the tension of the levers. If the wiper is pressed weakly against the glass, tighten the nut securing the arm (located under the plastic plug).

⚠️ Attention: Never use solvent-based products (such as White spirit or acetone). They destroy the rubber of the wipers and the protective coating of the glass.

If you notice that your wipers are starting to squeak, try the following:

  1. Wipe the rubber band with alcohol (removes silicone deposits).
  2. Apply a little car shampoo to the glass and turn on the wipers for 10 seconds.
  3. If the squeak does not disappear, replace the brushes (the rubber is worn out).

💡

Keep a spare set of windshield wipers in the trunk. On a long trip, this can save the situation if the brushes suddenly fail (for example, after ice gets under them).

FAQ: Answers to frequently asked questions about wipers Nissan Sunny FB15

Is it possible to install larger than standard wipers on the Sunny FB15?

No, this is not recommended. Larger wipers can:

  • 🚫 Cling to the edge of the hood or body when working.
  • 🚫 Create an excessive load on the windshield wiper motor, which will lead to its breakdown.
  • 🚫 Impair visibility due to incomplete adhesion to the glass.

The maximum permissible deviation from the standard size is ±1 cm.

How often do you need to change wipers on a Nissan Sunny FB15?

The service life of brushes depends on operating conditions:

  • 🌞 In temperate climates: once every 1–1.5 years.
  • ❄️ In regions with cold winters: once every 6–12 months (rubber hardens in the cold).
  • 🌧️ During intensive use (daily rain): every 6–8 months.

Signs that it's time to change your wipers:

  • 🔸 The appearance of stains or uncleaned areas on the glass.
  • 🔸 Creaking or knocking during operation.
  • 🔸 Cracks or peeling on the rubber band.

What to do if the wiper is stuck in a vertical position?

This is a typical problem if the wipers are turned on when the glass is frozen. To return the lever to its original position:

  1. Turn off the ignition.
  2. Gently pull the lever down with your hand (do not use excessive force!).
  3. If the lever does not move, remove the brush and check if the metal frame is bent.
  4. If the mechanism is jammed, contact service - the windshield wiper gear may be damaged.

⚠️ Do not try to turn on the wipers by force - this may burn the fuse or motor!

Will wipers from Nissan Almera N16 fit on Sunny FB15?

No, despite the external similarity of the models, they have different sizes of wipers:

  • Nissan Almera N16: driver's side - 55 cm, passenger's side - 43 cm.
  • Nissan Sunny FB15: driver's side - 60 cm, passenger's side - 40 cm.

In addition, the mounts may vary. Using wipers from Almera will lead to poor cleaning of the glass edges.

Is it possible to restore old wipers?

Partially yes. If the brush frame is intact and the rubber has only hardened a little, try:

  1. Soak the brushes in warm water and soap for 10-15 minutes.
  2. Rub the rubber with fine sandpaper (1000-1200 grit) to remove the hardened layer.
  3. Apply silicone lubricant to the rubber.

However, this is a temporary solution. Refurbished wipers will last another 1-2 months, after which they will still have to be replaced.