Nissan Almera G15 - a popular sedan, which from 2012 to 2019 was produced on the platform Renault-Nissan Alliance and gained trust thanks to reliability and unpretentiousness. However, even such a proven car has consumables that require regular replacement - for example, wiper blades. Worn windshield wipers not only impair visibility in the rain, but can also scratch the glass, leading to costly repairs.
In this article you will find exact dimensions of wipers for all modifications Almera G15, including original articles and compatible analogues. We will also figure out how to choose the right brushes based on the type of fastening, material, and even weather operating conditions. And for those who prefer to do everything themselves, we provide step-by-step instructions for replacement.
Official wiper sizes for Nissan Almera G15 (2012–2019)
The manufacturer installs on Almera G15 Windshield wiper blades are standard sizes, but they may vary slightly depending on the year of manufacture and equipment. Below is a table with official data for all versions of the car, including the restyled 2016 model.
| Wiper position | Size (inches) | Size(cm) | Original article | Mounting type |
|---|---|---|---|---|
| Driver's side (left) | 24" | 61 cm | 28260-4M000 |
Hook (J-hook) |
| Passenger side (right) | 18" | 45.7 cm | 28261-4M000 |
Hook (J-hook) |
| Rear wiper (for hatchback) | 12" | 30.5 cm | 28560-4M000 |
Top Lock |
⚠️ Attention: On some export versions Almera G15 (for example, for Middle Eastern markets) wipers with a length 22" (driver's) and 16" (passenger). Before purchasing, be sure to measure your old brushes or check their markings!
It is also worth considering that after 2016 (restyling), the mounting of the wipers remained the same, but some manufacturers of analogues may indicate different part numbers. For example, Bosch for this model we recommend brushes with fastening Aerotwin AR611S (24") and AR457S (18").
Types of wiper mounts: how not to make a mistake when purchasing
One of the key points when choosing new brushes is fastening type. On Nissan Almera G15 standard mount is used Hook (J-hook), but you can find other options in stores. In order not to buy incompatible wipers, let's look at the main types:
- 🔗 Hook (J-hook) - the most common fastening, resembling a hook. Suitable for most analogues.
- 🔳 Top Lock (Side Lock) - used on the rear wiper of a hatchback. The brush is secured on the side with a latch.
- 🔄 Bayonet (Bayonet) - found on older models, but for Almera G15 irrelevant.
- 🔶 Pinch Tab - fastening with a clamp, often used on premium cars.
If you buy wipers online, pay attention to the mark "Suitable for Nissan Almera G15" or check the type of fastening with the seller. For example, brushes DENSO with article number DU-24 And DU-18 have a universal adapter that is suitable for Hook.
- Original (Nissan)
- Brand analogues (Bosch, DENSO)
- Budget (SWF, Champion)
- Universal (with adapters)
⚠️ Attention: Some cheap blades may not fit accurately on the hook, causing the wiper to “dangle” or not fit tightly to the glass. Check reviews for a specific model before purchasing!
Wiper wiper materials: which is better for Russian conditions?
The choice of brush material directly affects cleaning quality And durability. In the Russian climate (frequent temperature changes, snow, freezing rain), it is better to give preference to the following options:
- ❄️ Winter wipers — have a protective cover that prevents icing. Suitable for regions with harsh winters (e.g. Bosch Ice or DENSO Winter).
- ☀️ Summer (rubber) - soft and elastic, but in frost they become tanned. Optimal for warm climates.
- 🔄 All-season - a compromise option with a graphite coating (for example, Valeo Silencio). They don’t freeze up, but they wear out faster than winter ones.
- 💎 Silicone - the most durable, but also the most expensive. They repel water well and wear less (for example, PIAA Super Silicone).
For most owners Almera G15 the optimal choice would be all-season brushes with graphite coating. They do not require seasonal replacement and cope well with both rain and snow. But cheap rubber wipers can begin to “stripe” the glass after 3–4 months, leaving streaks.
If the wipers start squeaking, try wiping the wipers with alcohol or a special cleaner. This often extends the service life by 1-2 months.
How to replace wipers on a Nissan Almera G15 yourself: step-by-step instructions
Replacing windshield wiper blades is one of the simplest procedures that even a beginner can handle. All you need is new wipers and 5 minutes of free time. Follow the instructions:
- Raise the wiper to the vertical position (perpendicular to the glass). Be careful not to drop it so as not to damage the mechanism.
- Press the fastening latch (usually this is a plastic latch on the back of the brush).
- Slide the old brush downto remove it from the hook.
- Install a new brush, aligning the mount with the hook until it clicks.
- Lower the wiper back onto the glass and check the work.
☑️ Preparing to replace wipers
⚠️ Attention: If the wiper starts to “bounce” or does not fit well after replacement, check whether the blade is installed correctly. Sometimes the mount may be skewed - in this case, remove it and reinstall it.
For the rear wiper (on a hatchback), the process is similar, but the mount Top Lock requires a little more effort when fixing. If the latch does not work, try pushing it from the side.
Top 5 analogs of original wipers for Almera G15
Original brushes Nissan They are not cheap (from 1,500 to 2,500 rubles per set), but there are worthy analogues on the market that sometimes surpass them in quality. We tested several popular brands and compiled a rating:
| Brand and model | Dimensions (driver/passenger) | Mounting type | Average price, ₽ | Features |
|---|---|---|---|---|
| Bosch Aerotwin AR611S + AR457S | 61 cm / 45.7 cm | Hook (universal) | 2 200 | Frameless, graphite coating, quiet operation |
| DENSO DU-24 + DU-18 | 61 cm / 45.7 cm | Hook | 1 800 | UV resistant, long service life |
| Valeo Silencio X-TRM 600 + 400 | 60 cm / 40 cm | Hook (requires adapter) | 1 500 | All-season, low noise |
| Champion EasyVision 24" + 18" | 61 cm / 45.7 cm | Hook | 1 200 | Budget option, good price/quality ratio |
| SWF VisioNext 610 + 457 | 61 cm / 45.7 cm | Hook | 900 | The cheapest option, but they wear out quickly |
Important: Valeo Silencio brushes have a size of 60 cm instead of 61 cm, but thanks to their flexible design they fit the Almera G15 without problems. If you choose between Bosch And DENSO, please note that the former cope better with heavy rain, and the latter with snow.
Common mistakes when choosing and replacing wipers
Even experienced car owners sometimes make mistakes that lead to poor performance of their windshield wipers. Here are the most common of them:
- 📏 Wrong size — buying brushes “by eye” without measurements. For example, instead of 24" they take 22", and the wiper does not clean the edge of the glass.
- 🔧 Incompatible mount — ignoring the type of latch. For example, buying a brush with
Pinch Tabinstead ofHook. - ❄️ Using summer wipers in winter — the rubber hardens in the cold, and the brushes begin to scratch the glass.
- 🚿 Saving on quality — cheap brushes often leave streaks and don’t last more than a season.
- 🔄 Late replacement — worn wipers reduce visibility by 30–40%, which is dangerous in the rain.
To avoid these mistakes, always check the dimensions and type of fastening before purchasing. If in doubt, take the old brush with you to the store - this way the seller will be able to select an exact analogue.
What happens if you use the wrong size wipers?
If the brush is too long, it will cling to the edge of the glass or body, which will lead to breakdown of the mechanism. A brush that is too short will not clean the entire area, leaving wet streaks. In both cases, visibility deteriorates and the risk of accidents increases.
When is it time to change wipers: signs of wear
Manufacturers recommend replacing windshield wiper blades every 6–12 months, but in practice the service life depends on the intensity of use and operating conditions. The following signs indicate that it is time to replace the wipers:
- 💧 Stains on glass — after using the brushes, streaks or cloudy spots remain.
- 🔊 Creaking or knocking - indicates tire wear or sand getting under the wiper.
- 📉 Deterioration of cleaning — the water is not completely driven away, drops remain.
- 🔍 Visible cracks in rubber — even small tears reduce efficiency.
- 🌡️ Icing in winter — if the brush freezes to the glass, it’s time to change it.
⚠️ Attention: If the wipers start “striping” the glass, it may not be their fault alone. Check fluid level in the washer reservoir and condition injectors - sometimes the problem lies in them.
Even if the brushes look normal, but the car is more than 3 years old, replace them as a preventative measure. Rubber loses its elasticity over time, even if you drive little.
FAQ: Answers to frequently asked questions about wipers Nissan Almera G15
Is it possible to install wipers larger or smaller than the standard size?
No, this is not recommended. Larger wipers may catch on the body or edge of the glass, while smaller ones may not clear the entire area. Exception: if the difference does not exceed 1-2 inches (for example, 23" instead of 24").
Which brand of wipers lasts the longest?
According to test results, the most durable brushes are PIAA Super Silicone (serve up to 2 years) and Bosch Aerotwin (1.5–2 years). Budget options (SWF, Champion) lasts for 6–12 months.
Do I need to lubricate the wiper mechanism?
Yes, it is recommended to apply silicone lubricant to the swing arm axles And plastic bushings. This will prevent squeaking and corrosion. Don't use WD-40 - it washes off with water!
Is it possible to restore old wipers?
Partially yes. If the rubber is worn out, but the frame is intact, you can buy rubber band repair kit (For example, Bosch Clear Advantage). But this is a temporary solution - after 3-4 months the brushes will still have to be changed.
Why do new wipers squeak?
Creaking can occur due to: 1) improper installation (check the fastening), 2) sand or dirt getting on the glass (wash it with car shampoo), 3) poor quality rubber (especially with cheap brushes). Try cleaning the gum with alcohol.