Oil filter for Nissan Almera G15: part numbers, analogues and replacement details

Replacing the oil filter with Nissan Almera G15 - a procedure on which the health of your car’s engine directly depends. Wrong choice of filter or installation errors can lead to oil starvation, accelerated wear of parts and even major repairs. In this article we will look at original articles, proven analogues, and also give step-by-step instructions for replacement, taking into account the specifics of the model.

Many owners Almera G15 Faced with confusion in article numbers: filters for gasoline engines HR16DE And K4M (1.6 l) differ from those installed on diesel versions. We analyzed catalog data Nissan, Mann-Filter, Bosch and other manufacturers to provide up-to-date information for 2026. You will also find out what fakes are common on the market and how to recognize them.

Original oil filters for Nissan Almera G15: part numbers and features

The official manufacturer recommends using only original filters that are guaranteed to meet the technical requirements of the engine. For Nissan Almera G15 (2012–2022) with gasoline engines HR16DE And K4M (1.6 l) fits filter with article number:

• 🔧 15208-9F60A - original filter from Nissan, installed from the factory. It has a high-quality filter element and a check valve that prevents oil from draining after stopping the engine.
• 🔄 15208-9F600 - an outdated article, but still found in catalogs. Fully interchangeable with 15208-9F60A.
• ⚠️ 15208-ED00A - filter for diesel versions Almera G15 (engine K9K). Not compatible with gasoline engines!

Original filters are supplied in original packaging Nissan with a holographic sticker. Inside the box there should be a gray or black filter with a metal body and a rubber o-ring orange (for petrol versions). If the ring is black or red, this is a fake or a filter for another model.

The cost of the original filter varies from 800 to 1,200 rubles depending on region and dealer. Buy cheaper 600–700 rubles risky - there is a high probability of running into counterfeit goods.

The best analogues of oil filters: what to choose instead of the original

If the original filter is not available or you are looking for a more budget option, you can consider analogues from trusted brands. The main thing is that they correspond sizes and technical specifications original. Below are the best alternatives:

Brand	Article	Compatibility	Features	Approximate price, ₽
Mann-Filter	W 610/3	Full	High quality paper, reinforced body, suitable for synthetic oil	450–600
Bosch	0 451 103 336	Full	Non-return valve made of silicone, increased dirt holding capacity	500–700
Mahle	OC 205	Full	Increased filtration area, suitable for harsh operating conditions	550–750
Framm	PH5822	Partial	Budget option, but the quality of the filter element is lower	300–450
SCT	SM 101	Full	Domestic brand, good price/quality ratio	250–400

When choosing an analogue, pay attention to thread diameter (must be M20 x 1.5) and body height (original - 76 mm). Also check for a check valve - without it, oil will drain into the sump after the engine is stopped, which will lead to a dry start and increased wear.

⚠️ Attention: Filters Framm And SCT often counterfeited. Buy them only from authorized dealers or trusted sellers with a guarantee.

When and how often to change the oil filter on Almera G15

The manufacturer recommends replacing the oil filter every 15,000 km or once a year, whichever comes first. However, this interval is only relevant for ideal operating conditions: quiet ride, high-quality fuel, absence of dust and temperature changes.

In reality, most owners Almera G15 face more severe conditions:

• 🏙️ City traffic with frequent traffic jams and short trips, the oil and filter wear out faster.
• 🌡️ Extreme temperatures (heat above +30°C or frost below -20°C) accelerate oil degradation.
• 🛣️ Dusty roads or off-road - the filter becomes clogged with small particles.

In such cases, the replacement interval should be reduced to 10,000 km. The filter must also be changed every time switching to another oil (for example, from semi-synthetic to synthetic) or if you bought a used car and do not know the service history.

Step-by-step instructions for replacing the oil filter

Replacing the filter with Nissan Almera G15 does not require special skills, but there are several nuances that are worth considering. You will need:

• 🔧 New oil filter (item no. 15208-9F60A or equivalent).
• 🛢️ Engine oil (4.3 l for engine HR16DE).
• 🔩 Filter puller (chain or cup 76 mm).
• 🔧 Key on 14 mm for the drain plug.
• 🧻 Rags, gloves, container for used oil.

Sequence of actions:

1. Warm up the engine to operating temperature (2-3 minutes) so that the oil becomes less viscous and drains better.
2. Raise the car on a lift or drive it into a viewing hole. An alternative is a jack with stops (but this is less safe).
3. Drain the old oil:
   • Unscrew the drain plug with a wrench 14 mm.
   • Place the container and wait until it drains completely (10–15 minutes).
   • Check the condition of the plug - if the thread is damaged, replace it.
4. Remove the old filter:
   • It is located to the right of the engine (when viewed in the direction of travel).
   • Use a puller to unscrew the filter counterclockwise.
   • Be careful - residual oil may leak out of the filter!
5. Install a new filter:
   • Lubricate the rubber O-ring with new oil.
   • Screw the filter by hand until it stops, then tighten it ¾ of a turn (do not overtighten!).

Fill with new oil, check the level with a dipstick and start the engine for 1–2 minutes. Make sure there are no leaks.

⚠️ Attention: If the oil pressure light comes on after replacement, turn off the engine immediately! This could mean the filter is not installed correctly or the check valve is faulty.

Common replacement mistakes and how to avoid them

Even experienced car owners sometimes make mistakes that can lead to serious damage. Here are the most common of them:

• 🔧 Drag a filter - this deforms the sealing ring and can lead to oil leakage. Only tighten the filter by hand + ¾ turn.
• 🛢️ Using the wrong oil - for Almera G15 with engine HR16DE oil recommended 5W-30 or 5W-40 (synthetic or semi-synthetic). Oil 10W-40 or mineral will reduce engine life.
• 🔄 Saving on filter — cheap, uncertified filters may not retain small particles, which will lead to engine wear.
• 🚫 Ignoring leaks — if leaks appear after replacing the filter, immediately eliminate the cause (usually incorrect installation or a damaged ring).

Critical error: using a filter from Nissan Almera Classic (B10) or other models. They are similar in appearance, but have a different check valve opening pressure, which leads to oil starvation during a cold start.

What happens if you don't change the filter on time?

A clogged filter stops passing oil, the bypass valve opens, and uncleaned oil enters the engine. This leads to accelerated wear of the liners, camshafts and turbine (if there is one). In critical cases, the engine may seize.

How to distinguish an original filter from a fake

Fake oil filters for Nissan Almera G15 are becoming more common. They look similar to the original, but do not provide adequate filtration and can collapse under pressure. Here's how to spot a counterfeit:

• 📦 Packaging — the original has high-quality printing, a holographic sticker and a barcode, which can be checked on the website Nissan.
• 🔍 Filter element — in the original it is dense, with uniform folds. A counterfeit paper is thin, often with burrs.
• 🟠 O-ring - must be orange (for gasoline versions) and elastic. For fakes it is black or red, and often tans when heated.
• 🔢 Marking — the original filter has an article number and logo stamped on it Nissan and country of origin (Japan or Thailand). For fakes, the inscriptions are blurry or misspelled.

If you doubt the authenticity, compare the filter with reference sample (you can find photos in official catalogs Nissan). Also pay attention to the weight - the original filter weighs about 200–220 grams, counterfeits are often lighter due to the thin metal of the case.

FAQ: Frequently asked questions about oil filters for Almera G15

Is it possible to use a filter from Renault on Almera G15?

Yes, but with reservations. Nissan Almera G15 And Renault Logan/Sandero with engine K4M (1.6 l) have the same filters. However, for the motor HR16DE (original Nissan) it is better to use a filter with the article number 15208-9F60A, since it is optimized for the lubrication system Nissan.

What to do if the filter does not unscrew?

If the filter gets stuck, try the following methods:

1. Treat the filter housing with liquid WD-40 and wait 10–15 minutes.
2. Use a chain puller - it provides better grip.
3. As a last resort, drill a hole in the filter and screw a self-tapping screw into it to rotate the housing.

Do not hit the filter with a hammer! This may damage the seat on the engine block.

Do I need to flush the engine when replacing the filter?

Flushing is only necessary in three cases:

• You switch to a different type of oil (for example, from mineral to synthetic).
• Wear products (metal shavings, flakes) were found in the oil.
• You bought a used car and don’t know what kind of oil the previous owner used.

For flushing, use a special flushing oil or reduce the first replacement interval to 5,000 km.

Is it possible to drive without an oil filter?

Absolutely not! Without a filter, the oil is not cleared of abrasive particles, which will lead to:

• Accelerated wear of crankshaft bearings and journals.
• Seizure on cylinders and pistons.
• Oil pump failure.

Even a short trip without a filter can turn into a major overhaul!