Wipers for Nissan Almera G15: sizes, selection and self-replacement

Owners Nissan Almera G15 (2012–2019 model years) are often faced with the need to replace wipers - especially after 2–3 years of operation, when the rubber loses its elasticity and glass cleaning deteriorates. But before buying new brushes, it is important to know their exact sizes in order to avoid mistakes when choosing. In this article we will look at standard and alternative wiper sizes for Almera G15, we’ll tell you how to distinguish original parts from analogues, and give step-by-step instructions for replacement.

A special feature of this model is the asymmetrical dimensions of the front glass blades, which often causes confusion. In addition, on the market there are both frameless, so frame options, each of which has its own pros and cons. We'll also look at which brands offer the best value for money and provide maintenance tips to help extend the life of your new wipers.

Standard wiper sizes for Nissan Almera G15

For Nissan Almera G15 (in the back B17, also known as Almera Classic In some regions), the manufacturer specifies the following wiper blade sizes:

• 🔹 Driver's side (left wiper): 600 mm (24 in)
• 🔹 Passenger side (right wiper): 400 mm (16 inches)
• 🔹 Rear wiper (if equipped): 300 mm (12 inches) - installed only on some trim levels since 2015

Important: these dimensions are valid for all modifications Almera G15, including restyled versions 2016–2019. However, on the market you can find brushes with a deviation of ±10 mm (for example, 580 mm instead of 600 mm). Such options are also suitable, but they may not adhere well to the edges of the glass.

Wiper position	Standard Size(mm)	Allowable range (mm)	Original article number (Nissan)
Left (driver)	600	580–610	28540-BM400
Right (passenger)	400	380–410	28541-BM400
Rear (optional)	300	280–320	28560-BM400

If you buy non-original brushes (for example, from Bosch, Denso or Valeo), pay attention to the markings according to the system SAE (Society of Automotive Engineers). For Almera G15 brushes with markings are suitable SAE J1984 - this guarantees compatibility of fastening type U-hook (9x3 mm).

How to choose wipers: original vs analogues

When choosing new brushes for Almera G15 owners are faced with a dilemma: buy original parts from Nissan or analogues from third-party manufacturers. Let's compare both options.

Original Nissan wipers

Benefits:

• 🔧 Perfect fit and adherence to the glass thanks to factory patterns.
• 🛡️ Guaranteed compatibility with mounts and drive mechanism.
• 📦 The set includes original rubber inserts with optimal rigidity.

Disadvantages:

• 💰 The price is 1.5–2 times higher than analogues (from 1,500 to 2,500 rubles per set).
• 🔄 They wear out faster when used in severe frost or heat.

Analogues from third-party brands

Popular replacement brands:

• 🔹 Bosch Aerotwin (frameless, article number: 3397004665 for 600 mm and 3397004663 for 400 mm) - the best price/quality ratio.
• 🔹 Denso Hybrid (hybrid, article number: DU-600 And DU-400) - optimal for winter use.
• 🔹 Valeo Silencio X-TRM (reinforced, article number: 600001 And 400001) - durable, but more expensive than analogues.

Tip: If you ride frequently on the highway or in rainy climates, choose frameless brushes (e.g. Bosch Aerotwin). They handle high speeds better and vibrate less. Frame options are also suitable for urban use (for example, Champion EasyVision).

Step-by-step instructions for replacing wipers

Replacing windshield wiper blades with Nissan Almera G15 takes no more than 10 minutes and does not require special tools. Follow these instructions to avoid errors:

1. Preparation: Park the car on a level surface and raise the wipers to a vertical position (perpendicular to the glass). To do this, turn on the ignition, activate the windshield wipers and turn them off in the middle position.
2. Removing the old brush: Press the latch (usually located on the underside of the mount) and pull the brush down, sliding it off the hook. If the latch does not budge, you can carefully pry it off with a screwdriver.
3. Installing a new brush: Align the new blade mount with the hook on the wiper arm and press until it clicks. Make sure the latch snaps into place.
4. Check: Turn on the wipers at minimum speed and check for any skipping or squeaking noises.

⚠️ Attention: Do not use excessive force when removing the blades - the wiper arms are Almera G15 They are plastic and may break under extreme pressure. If the latch does not budge, spray it WD-40 and wait 2-3 minutes.

Also pay attention to the condition rubber seals on new brushes. On cheap analogues they are often overdried - such a wiper will not last more than a season. High-quality rubber should be soft and elastic, without white coating.

Common mistakes when choosing and replacing wipers

Even experienced car owners sometimes make mistakes that lead to poor performance of their windshield wipers. Here are the most common of them:

• 🔧 Wrong size: Buying 650 mm blades instead of 600 mm leads to the fact that the wiper touches the plastic casing under the hood.
• 🔧 Ignoring mounting type: On Almera G15 used U-hook, but some brushes (for example, for Toyota) have fastening Pinch Tab - they won't fit.
• 🔧 Savings on quality: Cheap brushes without a brand often have an uneven fit, which causes streaks.
• 🔧 Replacing only one brush: If you replace the left wiper, be sure to replace the right one too - even if it looks fine. Different rubber hardness leads to uneven wear.

Another typical problem is wiper lever misalignment after replacement. This happens if the brush is not installed completely or the latch is not latched. To avoid this, after installation, slightly pull the brush up - it should not be removed without pressing the lock.

What to do if your wipers squeak?

Creaking is usually caused by two reasons: 1) Glass contamination (wax, silicone, resin). Solution: Clean the glass with alcohol or a special cleaner. 2) Hard rubber on new brushes. Solution: Wipe the rubber part with silicone lubricant or let the brushes “break in” for 1-2 days.

Caring for wipers: how to extend their service life

The average service life of windshield wiper blades is 6–12 months, but with proper care this period can be extended to 1.5–2 years. Here are some practical tips:

• 💧 Regular cleaning: Once a month, wipe the rubber inserts with a damp cloth to remove sand and dirt. For best effect use isopropyl alcohol.
• ❄️ Winter operation: Before frost, treat the rubber bands with silicone lubricant (for example, WD-40 Specialist Silicone). This will prevent it from freezing to the glass.
• ☀️ Summer care: In the heat, the rubber dries out. To avoid cracks, store your car in the shade or use windshield wiper covers.
• 🚿 Proper washing: Do not turn on the wipers on dry glass - this wears out the rubber. Always spray the glass with washer fluid first.

⚠️ Attention: Never use gasoline, acetone or other aggressive solvents to clean wipers. They destroy the rubber structure, making it brittle. Also avoid car washes with brushes - they often damage the rubber inserts.

If you notice that the wipers have begun to leave streaks, try to “reanimate” them using sandpaper (granularity 1000–1500). Gently walk along the rubber edge to remove any burrs. This is a temporary solution, but can extend the life of your brushes by 1-2 months.

Where to buy wipers for Nissan Almera G15

Buy windshield wiper blades for Almera G15 possible in several places:

Place of purchase	Benefits	Disadvantages	Average price (set)
Official dealer Nissan	Guarantee of original parts, compatibility check	High price, limited range	2 000–2 800 ₽
Online stores (Wildberries, Ozon, Exist.ru)	Wide selection of brands, frequent discounts	Risk of running into a fake, long delivery	800–1 800 ₽
Auto shops (Autodoc, Emex, "Auto49")	You can touch the product before purchasing, consultation with the seller	Prices are higher than online, not always in stock	1 000–2 200 ₽
Used markets (Avito, Drom)	You can find the original cheaper	High risk of buying worn brushes	300–1 000 ₽

When buying online, pay attention to reviews about the seller and photos of the product. There are many fake brands on the market Bosch And Denso — the original brushes of these brands have holographic stickers and clear markings.

If you buy brushes from a physical store, ask the seller to test them for flexibility. A high-quality brush should bend smoothly along its entire length without creases. Also inspect the fastening - on the original parts there is no play between the plastic elements.

FAQ: Frequently asked questions about wipers on Nissan Almera G15

Is it possible to install wipers larger than 600 mm?

Technically yes, but it is fraught with problems. A brush 650 mm long will touch the plastic casing under the hood, which will lead to extraneous noise and premature wear of both the wiper and body parts. The maximum permissible size is 610 mm, but it can also cause discomfort when working at high speeds.

How often do you need to change wipers on Almera G15?

The recommended replacement interval is every 6–12 months. However, if you notice any of these signs, replace your brushes sooner:

• 🔸 The appearance of stains or stripes on the glass.
• 🔸 Creaking or knocking during operation.
• 🔸 Visible cracks or peeling on the rubber.
• 🔸 Deterioration of cleaning during rain (especially at speeds above 60 km/h).

Will wipers from a Nissan Note or Micra fit?

No, despite the fact that these models belong to the same family, their brush sizes are different. For example, on Nissan Note E12 wipers of 530 mm (driver) and 450 mm (passenger) are installed, which is not compatible with Almera G15. Exception - some configurations Micra K13, where the dimensions may be the same (600/400 mm), but the fastening is often different.

What to do if the wipers do not adhere to the glass?

If the brushes are new but do not clean the glass well, check:

1. Correct installation (the brush may be skewed).
2. Cleanliness of the glass (grease or wax interferes with the seal).
3. Rubber hardness (sometimes new brushes need to be “broken in” for 1–2 days).
4. Serviceability of the wiper arms (play or bending leads to uneven pressure).

If the problem persists, try a different brand - such as hybrid brushes Denso fit better to curved glass.

Is it possible to restore old wipers?

Partially yes. If the rubber does not have deep cracks, try the following methods:

• 🔹 Process the edge silicone grease (will extend service life by 1–2 months).
• 🔹 Walk carefully on the rubber sandpaper 1000–1500 for removing burrs.
• 🔹 Soak the brushes in warm soapy water for 10–15 minutes to restore elasticity.

However, these measures are temporary. If the brushes are older than a year, it is better to replace them with new ones.