Owners Nissan Almera Classic often face the need to replace consumables when they notice a decrease in the efficiency of the ventilation system or the appearance of foreign odors in the cabin. High-quality air purification is not just a matter of comfort, but also a guarantee of the health of the driver and passengers, especially in a large city with a high level of air pollution. Many car enthusiasts get lost in search of the correct part code, as manufacturers often change catalog numbers or offer many analogues from third-party brands.
The right filter traps dust, pollen, soot, and unpleasant odors, ensuring clean air flows through your air conditioning and heating system. If you are looking for the exact cabin filter article number for your Nissan Almera Classic, then this article will be a comprehensive guide for you. We will analyze original numbers, proven analogues and nuances of choice so that you can make an informed purchase without unnecessary costs and errors.
Original articles and catalog numbers
When searching for spare parts in official dealerships or on suppliers' websites, it is important to rely on verified data from the manufacturer. For model Nissan Almera Classic (production based on Sentra B13/B14 or the first generation Renault Logan platform) there are several current numbers that can be found in different catalogs depending on the year of manufacture and region of delivery.
The most common original code that owners are looking for is 27277-65F0A. It is under this article that the part is supplied to official Nissan dealerships. However, it is worth considering that in the process of restyling or changing component suppliers, the number may change to a more modern version, for example, 27277-ED000 or 27277-ED00A. Always check the markings on the body of the old part with the new part number before ordering.
- π Main original number: 27277-65F0A
- πAlternate code for late models: 27277-ED000
- π Compatible number for Renault Logan/Sandero: 8200767100
Original parts are distinguished by their exact fit to the dimensions of the seat and the quality of the filter material, which is capable of retaining particles up to 95-99% in size, depending on the type. The use of counterfeits under the guise of an original can lead to the fact that the filter simply does not fit into the housing or begins to let dirt through, negating the entire effectiveness of the ventilation system.
The best analogues and filter manufacturers
Original spare parts are often more expensive than their analogues, but the quality of the latter can be no worse, and sometimes even exceed the factory standard. There are many proven brands on the auto parts market that specialize in the production of filter elements for Japanese and European cars. For Nissan Almera Classic the market offers a wide range of solutions.
One of the leaders in terms of price and quality ratio is the Korean brand Blue Print, whose article number ADN12306 widely distributed in retail chains. Also an excellent choice would be products from Mahle (code LAK 486) or German giant Mann-Filter (code CU 25013). These manufacturers use multi-layer materials, including activated carbon, which is critical for controlling exhaust odors.
- π°π· Blue Print: excellent geometry and affordable price
- π©πͺ Mann-Filter: premium quality and carbon layer
- π―π΅ Nippon Parts: reliable analogue with Japanese quality control
When choosing an analogue, pay attention to the presence of a carbon layer. Conventional paper filters only retain mechanical impurities, while carbon filters carbon filters adsorb harmful gases and odors, making your stay in the cabin more pleasant. For Nissan Almera Classic It is recommended to choose coal options, especially if you often drive in traffic jams.
β οΈ Attention: Do not buy filters without indicating the manufacturer on the package. Often, under the guise of well-known brands, counterfeit products are sold made from cheap paper, which quickly becomes clogged and stops allowing air to pass through, creating a load on the stove fan.
It is also important to take into account seasonality and climatic operating conditions. In regions with high dust levels or during plant flowering periods, it is better to use filters with a denser fiber structure, even if they have a slightly shorter replacement life. The trade-off between throughput and degree of cleaning is always individual for each driver.
- Regular paper
- Carbon filter
- Premium brand
- Budget analogue
Dimensions and specifications
The geometric parameters of the filter play a key role when installing it. If the part is too small, it will begin to leak untreated air through the cracks. If it turns out to be too large, it will have to be bent or deformed, which will break the tightness and can lead to damage to the filter housing. For Nissan Almera Classic standard dimensions are approximately 240x210x18 mm.
Exact dimensions may vary slightly between manufacturers, but the overall design should allow for easy installation without the need for additional gaskets or sealants. Most high-quality analogues have a rubber seal around the perimeter, which ensures a tight fit to the body. This prevents unfiltered air from entering the blower system.
The degree of purification and type of material also affect aerodynamic performance. Modern filters use synthetic fibers, which are more resistant to moisture and less susceptible to degradation over time compared to traditional cellulose. This is especially true for air conditioning systems, where temperature changes can cause condensation.
- π Length: 240 mm (permissible error Β±2 mm)
- π Width: 210 mm (important for correct installation)
- π Thickness: 18 mm (standard for most models)
| Manufacturer | Article | Filter type | Dimensions (mm) |
|---|---|---|---|
| Nissan (Original) | 27277-65F0A | Paper/Carbon | 240x210x18 |
| Mann-Filter | CU 25013 | Coal | 238x210x18 |
| Blue Print | ADN12306 | Coal | 240x210x18 |
| Sakura | C-1610 | Paper | 240x210x18 |
Location of the element in the car
Many owners Nissan Almera Classic They mistakenly believe that replacing the cabin filter is a complex procedure that requires disassembling the instrument panel. In fact, access to the filter is provided by the design of the car and is located in an easily accessible place. It is located under the glove compartment (side compartment) on the passenger side.
To get to the element, you do not need to use a special tool or dismantle the dashboard. It is enough to open the glove box and press the stops that hold it in the open position. Some modifications may require removing the plastic cover or plug covering the entrance to the filter housing, but this can also be done manually.
β οΈ Attention: When removing the old filter, be careful not to spill accumulated dust and leaves directly into the ventilation system. It is recommended to prepare a vacuum cleaner or cloth in advance to clean the surrounding area.
After removing the cover, you will see a filter frame that you just need to pull towards you. Pay attention to the direction of air flow, which is usually indicated by an arrow on the body of the old element. This is critical for proper installation of the new part, as incorrect orientation can reduce cleaning efficiency and increase fan noise.
What to do if the filter is stuck?
Sometimes, due to high humidity or prolonged inactivity, the filter may stick to the housing. Do not try to pull it out by force, as this may break the plastic frame. Use a plastic spatula or just wait until it's dry and gently rock it in different directions.
Step-by-step replacement instructions
The process of replacing the cabin filter Nissan Almera Classic takes no more than 10-15 minutes even for a beginner. You don't need a set of special wrenches or a lift. All work is done by hand inside the car. The main thing is to act carefully so as not to damage the plastic latches of the glove compartment.
First, open the glove box all the way. You will see limit stops on both sides. Push them with your fingers or a flathead screwdriver to release the drawer and allow it to drop down. You will now see a plastic cover covering the filter compartment. It is attached to several latches that can be easily pressed out with your fingers.
Remove the cover and pull out the old filter. Carefully inspect the cabinet for any debris, leaves, or insects that may have gotten inside. If there is dirt, remove it. Insert the new filter in the direction of the air flow arrow and snap the cover into place. Return the glove compartment to its original position, locking the stoppers.
βοΈ Replacing the cabin filter
After installing the new element, turn on the ventilation system and check operation at all speed modes. You should feel that the air flow has become stronger and the foreign odors have disappeared. If the fan noise remains the same, there may be other problems in the system, such as contamination of the air conditioner evaporator.
Before installing the new filter, lightly moisten the edges with water if it seems too dry and hard. This will help it fit into the housing more easily and provide a better seal.
Replacement intervals and signs of wear
The service life of the cabin filter depends on the operating conditions of the vehicle. Ideally, it should be changed every 10-15 thousand kilometers or once a year, whichever comes first. However, in conditions of dusty roads or high smoke, replacement may be required more often - every 5-7 thousand kilometers.
The main sign of the need for replacement is the appearance of an unpleasant odor when the ventilation is turned on, especially after parking or in rainy weather. Contamination is also indicated by a decrease in air flow intensity, even when the fan speed is turned on at maximum. If the glass fogs up faster than usual, this may also indicate a clogged filter.
- π§οΈ The appearance of dampness and mold in the cabin
- π¬οΈ Weakening the air flow from the deflectors
- π€§ Increased allergic reactions in passengers
Ignoring timely replacement can lead to the growth of bacteria and fungi on the surface of the filter. In this case, even a new filter may not immediately remove the odor, since colonies of microorganisms have already penetrated the ventilation system. In this case, a deeper cleaning of the air conditioner evaporator will be required.
Regular filter replacement is the cheapest way to prevent costly air conditioning system repairs and keep your occupants' respiratory system healthy.
Price comparison and buying tips
Price range for cabin filters for Nissan Almera Classic quite wide and depends on the brand, filter type and place of purchase. Original parts at dealerships can cost from 1,500 to 2,500 rubles, while high-quality analogues can be purchased for 400-900 rubles. The difference in price is not always justified, since many branded analogues offer comparable or better quality.
When purchasing, pay attention to the packaging. For original products and popular brands, the packaging must be intact, with a clearly printed logo and barcode. Avoid buying spare parts in secondhand markets or in unverified online stores, where the risk of getting a fake is maximum. Check the article number on the manufacturer's website before ordering.
If you are planning a purchase in an online store, be sure to ask about the possibility of returning if the part does not fit. Often sellers offer delivery to pick-up points where you can visually inspect the goods. Compare prices in several stores, since the cost of the same part may differ by 20-30% depending on the seller's markup.
For those who value comfort and health, the best solution would be to purchase a carbon filter from a trusted brand such as Mann or Blue Print. This will slightly increase costs, but will provide reliable protection from exhaust gases and allergens. Saving on such an important detail often leads to additional costs for treatment or repair of the ventilation system.
Can I use a filter from another model?
Sometimes owners try to install filters from Renault Logan or Dacia Sandero, since they have similar sizes. This is possible, but a perfect fit is not always guaranteed due to differences in housing design. It is better to use specialized solutions.
FAQ: Frequently asked questions
What is the article number of the original cabin filter for Nissan Almera Classic?
The main original article number is 27277-65F0A. There are also numbers 27277-ED000 and 27277-ED00A depending on the year of manufacture of the car.
Is it possible to install a regular filter instead of a carbon filter?
Technically possible, since the dimensions are identical. However, a carbon filter is better at trapping odors and harmful gases, so its use is highly recommended for comfort.
How often should the cabin filter be changed?
It is recommended to change the filter every 10-15 thousand kilometers or once a year. In dusty conditions, the interval should be reduced to 5-7 thousand kilometers.
Where is the cabin filter located on the Nissan Almera Classic?
The filter is located under the glove box on the front passenger side. To access you need to lower the drawer and remove the plastic cover.
Why does it still smell damp after replacing the filter?
This could be a sign that mold or mildew has already entered the air conditioner evaporator. In this case, professional cleaning of the ventilation system with antibacterial agents will be required.