Nissan Murano Z51 is a crossover that combines stylish design and practicality, but even its sills lose their presentable appearance over time. Chips, scratches and corrosion not only spoil the appearance, but also reduce the protection of the body. Door sill covers solve both problems: they mask defects and prevent new damage. However, not all models are equally effective - the choice depends on the material, method of fastening and even climatic operating conditions.
In this article we will look at which pads are suitable for Murano Z51 (2015–2021), how to install them correctly with your own hands and what to look for when purchasing. We analyzed reviews from owners, tests by independent experts and technical characteristics of popular brands to create an honest guide without advertising. If you want to save money on a service station or just like to do everything yourself, here you will find step-by-step instructions with nuances that sellers are silent about.
Why do we need door sill covers? Nissan Murano Z51?
Thresholds Murano Z51 are made of galvanized steel, but even this does not protect against mechanical damage. Sand, gravel, passengers' shoes and chemicals in winter gradually destroy the factory coating. Overlays perform three key functions:
- 🛡️ Corrosion protection — cover chips and microcracks, preventing moisture from entering the metal.
- 🎨 Aesthetics — hide scuffs and give the car a fresh look (especially important for cars older than 5 years).
- 💰 Savings - cheaper than repainting thresholds or welding work in case of rust through.
According to statistics from service centers, 68% of owners Murano Z51 Overlays are installed not only because of damage, but also for prevention. For example, in regions with salty roads in winter, the risk of corrosion increases by 40%. At the same time, the original linings from Nissan they cost 2–3 times more than their analogues, but do not always justify the price - more on that below.
- There are already chips/rust
- I want to protect the body in advance
- Changing the design of the car
- Another option
Types of linings: materials and their features
There are four main materials available on the market. Each has pros and cons that are important to consider when choosing for Murano Z51.
| Material | Pros | Cons | Service life |
|---|---|---|---|
| ABS plastic | Lightweight, UV resistant, non-rusting, wide choice of colors | Less durable, may crack if hit hard | 3–5 years |
| Polyurethane | Flexible, absorbs shock, does not break in the cold | Turns yellow over time, more difficult to maintain | 4–6 years |
| Aluminum | Durable, stylish look, non-corrosive | Expensive, may bend under strong mechanical stress | 7+ years |
| Stainless steel | Maximum protection, durability, premium look | Heavy, may cause galvanic corrosion if installed incorrectly | 10+ years |
For Murano Z51 experts recommend ABS plastic or polyurethane — they optimally combine price and protection. Aluminum and stainless steel are suitable for those who are willing to pay for premium appearance and durability. Important: stainless steel linings require mandatory anti-corrosion treatment of contact points with the body, otherwise the risk of rust increases by 2 times.
⚠️ Attention: Overlays made of cheap plastic (without UV stabilizers) become brittle and crack after a year or two. Check the quality certificates from the seller!
Top 5 rubber brands for Nissan Murano Z51
We analyzed reviews on Drive2, Drom.ru and foreign forums to rank reliable manufacturers. Selection criteria: price/quality ratio, accuracy of fit and durability.
- 🥇 Hecko (Germany) - the best choice for those who value accuracy. The trims are made using 3D scans of the body Murano Z51, fastening without drilling. Material: ABS plastic with UV protection.
- 🥈 EGR (Poland) - the best option for the price. The kit includes clips and double-sided tape. Minus: thin plastic, requires careful installation.
- 🥉 AutoStyle (Russia) - budget pads with a good fit. Suitable for temporary protection (for 1–2 seasons).
- 4️⃣ Stillen (USA) - premium aluminum trims with anodized coating. Ideal for tuning, but the price is 3-4 times higher than analogues.
- 5️⃣ Nissan Original - original parts, but often made to order (delivery time up to 2 months). The quality justifies the price, but only if you buy from official dealers.
Among the owners Murano Z51 most popular Hecko And EGR - they occupy 70% of the market due to the balance of price and quality. Original linings from Nissan Only those who are not willing to take risks with adjusting analogues take it.
Before purchasing, check the article number of the linings for your configuration Murano Z51. For example, for versions with Intelligent AWD Extended models may be required due to the characteristics of the rear sills.
Step-by-step instructions for installing overlays
Installation of overlays on Murano Z51 does not require special skills, but there are nuances that affect the final result. Let's look at the process using plastic linings as an example. Hecko (similar for most brands).
Wash the sills with car shampoo and dry|Degrease the surface with alcohol or anti-silicone|Check the complete set of linings (clips, tape, instructions)|Prepare the tools: screwdriver, hair dryer, scissors-->
Step 1. Removing old pads (if any)
If on your Murano Z51 the covers are already in place, carefully pry them off with a plastic spatula and heat them with a hair dryer (temperature 50–60°C). Do not use metal tools - they will scratch the paint. Remove remaining adhesive with solvent WD-40 or a special cleaner.
Step 2. Trying on new pads
Before fastening, attach the trims to the thresholds and check the alignment of the holes for the clips. U Murano Z51 There is often a problem with the back of the threshold - if the trim protrudes, cut it with metal scissors (only for plastic models!). Aluminum or steel linings cannot be edited - this will compromise the protection.
Step 3. Attachment
Most models use a combination of clips and double-sided tape. For Murano Z51, follow this sequence:
- Apply adhesive tape to the back of the cover (do not remove the protective layer!).
- Attach the clips to the technological holes of the threshold (usually 3-4 pieces per side).
- Apply the trim starting from the front and gradually press it towards the threshold.
- Remove the protective layer from the tape and finally secure the cover.
Step 4: Finishing
After installation, heat the pads with a hairdryer (temperature 40°C) - this will improve the adhesion of the adhesive tape. Avoid washing the car for 24 hours to allow the adhesive to fully set. For additional end protection, apply silicone sealant. ABRO.
⚠️ Attention: If, after installation, the linings “walk” when pressed, it means that the clips did not snap fully into place. Don't ignore this: over time, the trim will fall off, and tape marks will remain on the threshold.
What to do if the clips don't fit?
If standard clips are not fixed in the threshold holes, use universal clips with a diameter of 6–8 mm (article: 90467-S3000). They can be bought at any auto store for 50–100 rubles.
Common installation mistakes and how to avoid them
Even experienced car owners make mistakes that ruin all their efforts. Here are the most common mistakes and ways to prevent them:
- 🧼 Dirty surface — if the thresholds are not degreased, the tape will fall off in a week. Use
Antisiliconeor isopropyl alcohol. - 🔥 Hairdryer overheating — at temperatures above 70°C the plastic becomes deformed. Keep the hairdryer at a distance of 20 cm.
- ✂️ Sloppy pruning — if you cut the overlay with a knife, the edge will be uneven. Use tin snips or a utility knife with a new blade.
- 💧 Cleaning immediately after installation - water will get under the tape and weaken the fastening. Wait 24 hours.
Another typical problem is color mismatch. ABS plastic trims often look lighter or darker than the body Murano Z51 in the sun. Solution: order tinting from a car service center or buy factory-painted linings (for example, from Hecko There is an option to select by VIN code).
Before purchasing overlays, measure the length of the thresholds of your Murano Z51 — it may differ depending on the year of manufacture (2015–2018 vs 2019–2021).
Price comparison: original vs analogues
The cost of overlays varies from 1,500 to 15,000 rubles per set. Let's look at what affects the price and where you can save money without losing quality.
| Brand | Material | Price (set), ₽ | Where to buy |
|---|---|---|---|
| Nissan Original | ABS plastic | 12 000–15 000 | Official dealers |
| Hecko | ABS plastic with UV protection | 6 500–8 000 | Wildberries, Kufar.by |
| EGR | Polyurethane | 3 500–4 500 | AutoProfi, Exist.ru |
| AutoStyle | Plastic (budget) | 1 500–2 500 | Avito, local shops |
| Stillen | Aluminum | 20 000–25 000 | Order from USA (Amazon) |
Original linings from Nissan are justified only if you plan to sell the car - they will retain the warranty on the body. Optimal for personal use Hecko or EGR. Budget AutoStyle suitable for temporary protection, but they will have to be changed every 1–2 years.
Tip: keep an eye on promotions on Wildberries or Ozon — there are often discounts of up to 30% on car accessories. You can also look for used pads in good condition at Avito (especially relevant for aluminum models Stillen, which hardly wear out).
Caring for your pads: how to extend their service life
Door sills, like any element of the exterior, require maintenance. Proper cleaning and treatment will increase their service life by 30–50%. Here's what the experts recommend:
- 🧽 Washing - use a soft sponge and car shampoo without abrasives (for example,
Karcher). Avoid high-pressure washers - the jet of water may bend the edges of the pads. - 🧴 Protection - apply wax or polish (for example,
Turtle Wax). Suitable for plastic coversPlast Carefrom Sonax. - ☀️ Parking — try to avoid prolonged exposure to direct sunlight. UV rays destroy even protected plastic.
- ❄️ Winter — before cold weather, treat the linings with silicone grease (for example,
Liqui Moly). This will prevent ice from freezing and causing cracks.
If small scratches appear on the linings, they can be polished with paste. 3M (for plastic) or paint over with a marker-corrector. Deep damage to aluminum or steel linings can only be repaired in a car service center.
⚠️ Attention: Do not use products containing alcohol or solvents (such as White spirit). They destroy the protective layer of plastic and cause clouding.
FAQ: answers to frequently asked questions
Is it possible to install door sill covers? Murano Z51 without drilling?
Yes, most modern overlays (eg. Hecko or EGR) are attached with double-sided tape and standard clips. Drilling is only required for some stainless steel or aluminum models where additional reinforcement is needed.
What color of the linings should I choose: to match the body color or contrasting?
It depends on your preference:
- 🎨 Body tone — visually merges with the car, emphasizing its factory design.
- ⚫ Contrasting (black, chrome) - gives a sporty look, but requires a perfect fit.
For Murano Z51 black linings are more often chosen - they are universal and mask dirt.
What should I do if the pads come off after installation?
There may be two reasons:
- Poorly degreased surface - remove the trim, clean the sills and repeat installation.
- Low quality tape - replace it with 3M VHB (part number
4910).
If the problem is in the clips, buy tougher ones (for example, from Toyota, article 90467-12011).
Are the pads suitable for Nissan X-Trail T32 on Murano Z51?
No, despite the platform relationship, the thresholds of these models have different shapes. Overlays from X-Trail will be shorter and narrower, which will lead to a loose fit and moisture getting under them.
How long does it take to install the overlays?
If you have the tools and experience - 1–1.5 hours for both thresholds. Beginners will need 2-3 hours, especially if you need to trim trim or remove old glue.