Oil filter Nissan Almera G15: a complete guide to selection and replacement

Operation of a Japanese sedan Nissan Almera the new generation (G15 body) requires careful attention to the engine lubrication system. The service life of turbocharged or naturally aspirated engines installed on these cars depends on the quality of oil filtration. Many owners make the mistake of ignoring the difference between original parts and cheap analogues, which ultimately leads to accelerated wear of the components.

In this article we will look at what original filter suitable for the model, what quality replacements exist and how to properly carry out the maintenance procedure. You will learn what to look for when buying so as not to run into a fake, and why saving on consumables can result in a major engine overhaul.

Lubrication system Nissan Almera G15 equipped with modern solutions that require precise selection of geometry and throughput. The wrong choice can lead to a drop in oil pressure or a rupture of the bypass valve. We have prepared detailed material that will help you keep your car's engine in perfect condition for many years.

Original filtration part numbers and specifications

When searching for the required part, you first need to focus on the catalog number from the manufacturer. For Nissan Almera G15, equipped with gasoline engines of the HR15DE or HR16DE series, the standard solution is a filter with the article number 15208-65F0A (sometimes there is a cross number 15208-65F0D). This is a cartridge system where only the internal part is changed, and the housing remains on the engine.

The original element has a specific filter material structure that retains particles up to 20-25 microns in size. This is critical to work. bypass valve and maintaining stable pressure in the system. Cheap analogues often use low-quality paper, which quickly gets wet or allows dirt to pass through during a cold start.

It is important to note that the filter design for Nissan Almera involves the use of an O-ring, which often comes with the cartridge. If you buy an original, check that this ring and lubricant are included in the kit. The absence of these little things can lead to oil leakage after replacement.

• 🔍 Original: 15208-65F0A - the standard of quality and precise fit.
• 🔧 Design: removable cartridge, metal case does not change.
• 🛡️ Filter material: synthetic base with high oxidation resistance.

⚠️ Attention: Do not confuse filter articles for Almera G15 with parts for the previous generation (G11). They have different sizes and are not interchangeable, despite the external similarity of the case.

Top best analogues from world brands

Original spare parts Nissan are often expensive, so many car owners are looking for worthy replacements. The market offers many brands that produce filters to the same standards as the factory. However, the choice must be conscious, since the market is flooded with counterfeit goods.

One of the market leaders is the company OHM (produces for many Japanese brands) or JS Asakashi. These brands supply products to conveyors and guarantee high quality filter elements. It is also worth paying attention to European brands, such as Mann-Filter or Hengst, which have their own cross numbers for this model.

When choosing an analogue, be sure to check the presence of all the necessary seals. Some cheap Chinese brands produce cartridges without gaskets or with low-quality rubber that hardens in the cold. This can lead to oil starting to leak out after just a few thousand kilometers.

• 🏆 JS Asakashi - Japanese quality, often comes as the original in a different package.
• 🇪🇺 Mann-Filter (HU 612/4 x) - German reliability, excellent filtration.
• 🇰🇷 Doorman is a Korean brand, good value for money.

Checklist before purchase and replacement

Before you go to the store or begin replacement work, you need to prepare everything you need. Skipping any step could leave you with an open engine and dirty hands in the middle of the garage. Gather all tools and supplies in advance.

You will need a new filter, fresh engine oil, and a set of wrenches to remove the oil pan plug. Don’t forget about a container to drain the waste liquid and a rag to clean up possible spills. Cleanliness in the engine compartment is the key to long life of electronics and sensors.

Pay special attention to the condition of the O-ring on the old filter. If it remains on the engine, it must be carefully removed to avoid installing the gasket twice. This is a common mistake that leads to severe oil leaks and a fire hazard.

How to remove the old gasket?

Use a thin screwdriver or a special hook to carefully pry off the old ring. Be careful not to damage the filter housing threads. If the ring is stuck, moisten it with penetrating lubricant and wait 10-15 minutes.

Step-by-step instructions for replacing the cartridge

The process of replacing the filter element with Nissan Almera G15 It’s not particularly difficult, but it does require some care. The engine should be warm, but not hot, so that the oil is liquid and completely drains, but you do not get burned while working.

First, unscrew the oil pan drain plug and allow the oil to drain into a prepared container. Next, locate the oil filter housing cover, which is usually located at the front of the engine. Unscrew the cover with a 24 mm wrench or a specialized puller.

Remove the old cartridge and carefully inspect the O-ring. Clean the cover seat from dirt and old oil residues. Install a new O-ring after lubricating it with clean engine oil. This will ensure a tight connection.

• 🔧 Unscrew the filter housing cover counterclockwise.
• 🗑️ Remove the old cartridge and recycle it.
• 🧼 Clean the housing and install a new gasket.

Common mistakes and how to avoid them

Many car owners encounter problems after replacing them themselves. The most common mistake is overtightening the filter housing cover. The plastic cap may crack, leading to costly repairs and oil leakage. The tightening torque must be strict, usually around 25 Nm.

Another problem is the use of low-quality oil. Even the best filter will not be able to protect the engine if the oil quickly oxidizes or loses its properties. For Nissan Almera G15 It is recommended to use oils with a viscosity of 5W-30 or 0W-20 that meet the standards API SN or ACEA C3.

Don't forget to check the oil level after changing. Often, when draining, some of the liquid remains in the system, and if you add too much, this will lead to foaming of the oil and an increase in pressure. Use a dipstick or electronic sensor to accurately control the level.

⚠️ Attention: Never leave an old gasket on the body! If it remains during replacement and you install a new one, the oil will begin to gush out under pressure, which is dangerous for the engine and others.

Filter type	Article	Average price	Resource
Original Nissan	15208-65F0A	1500 - 2000 rub.	15,000 km
JS Asakashi	OX388D	800 - 1200 rub.	10,000 - 15,000 km
Mann-Filter	HU 612/4 x	1000 - 1400 rub.	10,000 - 15,000 km
Doorman	DO 9200	600 - 900 rub.	7,000 - 10,000 km

How to distinguish a fake from the original

Counterfeit products are found everywhere in the auto parts market. Counterfeit filters may have incorrect geometry, poor paper and low-quality rubber. To avoid buying a fake, carefully inspect the packaging and the item itself when purchasing.

Original packaging Nissan It has clear printing, high-quality font and holographic stickers. The filter itself must have markings that match the data in the catalog. The color and quality of the plastic of the lid also play a role: the original has a matte surface without burrs.

If you buy a filter online, ask for a photo of the actual product, not a picture from a catalog. Pay attention to the price: if it is significantly lower than the market price, this is a reason to be wary. A high-quality filter cannot cost a penny due to the cost of materials and production technologies.

• 📦 Packaging: clear printing, no typos, barcode.
• 🔍 Marking: the article is stamped on the metal, not pasted on with a sticker.
• 🧱 Plastic quality: smooth surface, no casting defects.

What to do if you bought a fake?

If you discover that you have bought a counterfeit filter, immediately replace it with a high-quality original or a proven analogue. Drain the oil and flush the engine, as the fake may have already let dirt into the system. Return the item to the seller, presenting evidence of counterfeiting.

Maintenance schedule and replacement intervals

The manufacturer recommends changing the oil filter along with the engine oil every 10,000 kilometers or once a year, whichever comes first. However, in city conditions with traffic jams and dust, it is better to reduce this interval to 7,000 - 8,000 kilometers.

Severe operating conditions, such as frequent short trips, traffic jams or off-road driving, accelerate oil aging and filter clogging. In such cases, replacement should be carried out more often to avoid problems with the engine.

Don't forget that service life filter directly depends on the quality of the oil. If you use cheap mineral oil, the filter may not even last 5,000 kilometers. Synthetic oils allow you to increase the interval, but do not exceed the values ​​​​recommended by the manufacturer.

Frequently asked questions (FAQ)

Can the filter be used with a different article number?

It is advisable to use only the recommended article 15208-65F0A or its proven analogues. Using an unsuitable filter may result in loss of oil pressure and engine damage.

Do I need to change the O-ring every time?

Yes, the O-ring must be replaced every time the filter is replaced. The old ring may be deformed or damaged, causing oil to leak.

How to check that the filter is installed correctly?

After installation, start the engine and let it run for a few minutes. Check the connection of the filter cover for leaks. If the oil does not drip, everything is done correctly.

How much oil does it take to change a Nissan Almera G15?

The oil volume in the HR15DE engine is approximately 4.2 liters when replaced with a filter. It is recommended to buy a 4 liter canister and an additional 1 liter for refilling.

Can the filter be washed before reuse?

Absolutely not. Filter elements are disposable. An attempt to wash the filter will lead to destruction of the paper structure and loss of filtering properties.

Taking care of your vehicle's lubrication system is an investment in its reliability and longevity. Choose high-quality consumables, follow the maintenance regulations and your Nissan Almera G15 will delight you with trouble-free operation for many years. Don't skimp on safety and comfort, because the health of your engine directly affects your safety on the road.

Remember that using a low-quality filter can lead to failure of the turbine and hydraulic compensators, the repair of which will cost tens of thousands of rubles. It's better to spend a little more on a quality kit than to shell out for a major engine overhaul later. Be careful when choosing and have a good journey!