Owners Nissan Note E11 (2006–2013) are often faced with the need to replace the standard radio - be it due to an outdated audio system, lack of support for modern formats, or a simple breakdown. But choosing the right model is not so easy: you need to take into account seat dimensions, compatibility with car electrics, availability of interfaces for a rear view camera and steering control. In this article we will look at all the nuances - from technical specifications to step-by-step installation instructions.

Feature Note E11 the fact that its audio system is integrated with on-board electronics: for example, the standard radio can control climate control via a CAN bus. When replaced with a generic model, these features are often lost, but there are ways to work around the limitations. We have analyzed more than 50 radio models and selected the best options for different budgets - from simple FM players to multimedia systems with Android Auto And Apple CarPlay.

Technical characteristics of the Nissan Note E11 head unit

Standard audio system in Nissan Note E11 has the following parameters:

  • 📏 Seat size: 2DIN (height 100 mm, width 178 mm). Available in some configurations 1DIN, but this is rare.
  • 🔌 Connector: branded Nissan 16-pin (not compatible with ISO standard without adapter).
  • 🎵 Output power: 4×20 W (standard speakers are designed for this load).
  • 📡 Antenna: separate connector FAKRA (not compatible with universal antenna cables without an adapter).

An important point: in cars with climate control, the radio is connected to the control unit via CAN bus. When replacing with a universal model, you will need CAN adapter (For example, Pacific CAN-BUS or Connects2 CTNIS001) to maintain the functionality of the steering wheel buttons and the display of information on the dashboard display.

⚠️ Attention: If you ignore the CAN adapter, after installing a new radio, the temperature, time and climate control readings from the buttons on the steering wheel may disappear.
Parameter Value for Nissan Note E11 Notes
Seat type 2DIN (less often 1DIN) Check before purchasing - 1DIN may be standard.
Power connector Nissan 16-pin An ISO adapter or an adapter for a specific radio is required.
CAN bus Yes (in versions with climate control) Without the adapter, the steering and display functions will be lost.
Rear view camera support Yes (in configurations with parking sensors) The new radio must have an RCA input for the camera.

How to choose a radio for Nissan Note E11: criteria

When choosing a radio, focus on the following parameters:

  1. Device type: 1DIN or 2DIN. For Note E11 optimal 2DIN — it allows you to install a touch screen and save space for additional buttons.
  2. Protocol support: Android Auto And Apple CarPlay - a mandatory minimum for a modern system. Check if the radio has USB Type-C or Wireless CarPlay.
  3. Power and sound: If you plan to improve acoustics, choose a model with amplifier output (RCA). For standard speakers, 4x50 W is enough.
  4. Steering Wheel Compatible: Make sure the radio supports CAN-BUS adapters for Nissan.

Pay special attention screen resolution. Cheap radio tape recorders often have a screen with resolution 800×480, which is noticeably worse than 1024×600 or 1280×720 in premium models. Also check if it is included installation frame - for Note E11 standard will do 2DIN frame, but sometimes the panel requires modification.

📊 Which radio function do you consider the most important?
  • Android Auto/CarPlay support
  • High quality sound
  • User-friendly interface
  • Rear view camera
  • Other

Top 5 radios for Nissan Note E11 in 2026

We analyzed owner reviews and technical specifications to rank the best radios for Nissan Note E11:

  • 🥇 Pioneer AVH-X5800DAB - flagship with Wireless CarPlay, DAB+ radio and support FLAC. Ideal for music lovers.
  • 🥈 Sony XAV-AX5500 — touch screen 6.95" with permission 800×480, fast response and simple interface.
  • 🥉 JVC KW-M760BT - budget model with Apple CarPlay And Android Auto, but without wireless connection.
  • 💰 Atoto S8 Ultra - radio tape recorder Android 12 with 4G module and support Google Play. Suitable for those who want a full-fledged tablet in the car.
  • 🔧 Alpine UTE-73BT - a simple and reliable radio with good sound, but without a touch screen.

Important: Models with Android (for example, Atoto S8) require a separate CAN adapter to work correctly with the steering wheel and dashboard display. Also note that radios with Android can slow down over time, unlike specialized devices on Linux (like Pioneer or Sony).

Model Screen type Android Auto / CarPlay CAN adapter included Price (approx.)
Pioneer AVH-X5800DAB 6.8", touch, 800×480 Wireless CarPlay, Android Auto No 45 000 ₽
Sony XAV-AX5500 6.95", touch, 800×480 Wired CarPlay, Android Auto No 35 000 ₽
Atoto S8 Ultra 10.1", touch, 1280×720 Wireless CarPlay, Android Auto No (needed separately) 30 000 ₽
💡

If you choose a radio with Android, check for firmware updates on the manufacturer's website. Many Chinese brands stop supporting models after 1-2 years.

Step-by-step instructions for installing a radio in a Nissan Note E11

Installing a new radio consists of several stages. If you do not have experience working with car electronics, it is better to contact a service center - connection errors can damage the on-board computer.

To work you will need:

  • 🔧 Set of screwdrivers (phillips and flat).
  • 🔌 Power adapter Nissan 16-pin → ISO (if the radio is not original).
  • 📶 CAN adapter (for example, Connects2 CTNIS001).
  • 🔊 Antenna adapter FAKRA → ISO (if the radio does not support the original connector).

Next we follow the algorithm:

  1. Disable negative battery terminal (required!).
  2. Remove the decorative panel around the radio - it is secured with latches. Pry it out from the side with a flathead screwdriver.
  3. Unscrew the 4 screws securing the radio and carefully pull it out of its seat.
  4. Disconnect all connectors (power, antenna, CAN bus).
  5. Connect the adapters to the new radio according to the diagram (see below).
  6. Install the radio in the seat and secure it with screws.
  7. Connect the battery and check operation.

☑️ Check before first use

Done: 0 / 4

Connector connection diagram for Nissan Note E11:



Nissan 16-pin → ISO-адаптер:


1  (Жёлтый) → B+ (постоянный +12В)


2  (Красный) → ACC (зажигание)


3  (Чёрный) → GND (масса)


4  (Зелёный) → Антенна (если есть)


5  (Белый) → Передний левый динамик (+)


6  (Белый/чёрный) → Передний левый динамик (-)


...


(полную схему смотрите в инструкции к адаптеру)
⚠️ Attention: If the radio does not turn on after installation, check Speaker connection polarity. Incorrect connection may result in a short circuit.

Setting up the radio after installation

After physical installation, you need to configure the software part:

  1. Synchronization with CAN bus: Connect the CAN adapter to the radio and configure it through the menu. For Connects2 CTNIS001 you need to select a car model (Nissan Note E11) and firmware version.
  2. Connecting a smartphone: For Android Auto or CarPlay use original cable USB → Lightning/Type-C. Wireless connection does not work on all radios (check the specifications).
  3. Sound settings: In the radio menu, turn off Loudness (distorts the sound at high volumes) and adjust the equalizer to suit your speakers.
  4. Rear view camera: If you connected a camera, activate it in the settings and calibrate the parking lines.

For radios on Android (For example, Atoto S8) additionally you will need:

  • 📱 Install the latest updates via Settings → System Update.
  • 🔊 Set up a microphone for voice commands (usually it is built into the front panel).
  • 📡 Connect to Wi-Fi to download maps Google Maps or Yandex.Navigator.
How to reset the radio settings to factory settings?

If the radio is frozen or does not work correctly, reset: 1) Press the button Reset (usually on the front panel) for 10 seconds. 2) Or turn off the power for 1 minute (by removing the battery terminal).

Common problems and their solutions

Even after proper installation, problems may occur. Let's consider typical cases:

  • 🔇 No sound: Check the speaker connections (plus to plus, minus to minus). If there is sound only on the front speakers, turn on the mode in the radio settings 4CH Output.
  • 📵 Steering does not work: Make sure the CAN adapter is connected to the correct connector (usually CAN-H And CAN-L on 6 and 14 pins of the connector Nissan 16-pin).
  • 🔄 The radio turns off when the engine starts: Setting problem ACC. In the radio menu, select Ignition Control → ON.
  • 📻 Poor radio reception: Check the antenna connection. If you are using an adapter FAKRA → ISO, make sure it is not damaged.

If the radio is on Android slows down, try:

  1. Clear cache in settings (Settings → Apps → Clear Cache).
  2. Disable autorun of unnecessary applications.
  3. Update the firmware (download the latest version from the manufacturer’s website).
💡

If, after installing a new radio, the clock or climate control stop working, the problem is definitely in the CAN adapter. Check its compatibility with your model Nissan Note E11 (for example adapters for Note E12 won't fit!).

FAQ: Frequently asked questions about radios for Nissan Note E11

Is it possible to install a 1DIN radio instead of a 2DIN?

Yes, but it will be required special frame adapter to fill free space. Also note that functionality will be limited - for example, you won't be able to install a large touch screen.

Do I need to buy an amplifier for a new radio?

If you are satisfied with the sound of the stock speakers, an amplifier is not necessary. But if you plan to install powerful acoustics (for example, a subwoofer), you will need an external amplifier with RCA inputs.

How to connect a rear view camera?

The camera is connected to RCA input on the back panel of the radio (usually a yellow connector). The camera is powered from the reversing lights (plus on +12V when engaging reverse gear).

Why doesn't the radio see the flash drive?

The problem may be in the file system format (need FAT32) or in the USB port itself. Try formatting the flash drive and check whether the radio supports its capacity (usually up to 32 GB).

Is it possible to keep the standard antenna?

Yes, but you will need an adapter FAKRA → ISO. Without it, you will have to install a new antenna or use an adapter with a signal amplifier.