Vehicle operation Nissan Note in our climatic conditions, it often leads to the appearance of chips and cracks on the front glass. Small crushed stones flying from under the wheels of trucks become the main enemy of transparency. Ignoring even small damage can lead to the fact that over time a crack will spread across the entire field of view, which is strictly prohibited by traffic rules and creates a safety hazard.
Replacement windshield is not just a cosmetic repair, but a complex procedure that requires taking into account many technical nuances. Modern versions Nissan Note, especially those equipped with an all-round viewing system or an automatic sprinkler, have specific mountings and sensor sticker areas. Incorrect selection of material can lead to distortion of the picture or failure of the electronics.
In this article, we will look in detail at how to choose a quality product, which brands offer the best price-quality ratio, and also consider the stages of self-replacement. You will learn why it is important to use the original polyurethane sealant and how to avoid drafts after installation. We will also pay attention to the features of heated glass and a camera, which are often found in recent models.
Types of glass for Nissan Note: choice between original and analogue
The aftermarket offers a wide range of options for owners Nissan Note. Most car owners are faced with a dilemma: overpay for branded glass or save on an analogue one. Original glass (OEM) comes in boxes with the Nissan logo and has a perfect geometry that matches the body with millimeter precision. However, its cost often exceeds reasonable limits for a budget car.
Analogues from trusted global manufacturers are often not inferior to the original in quality, but are much cheaper. The key factor when choosing is the presence of a safety certificate and compliance with ECE standards. Pay attention to the marking in the corner of the product: it should contain the country of origin code and information about the type of glass (for example, Laminated for multilayer).
- π‘οΈ Original (OEM) - maximum dimensional accuracy, but high price and long delivery time.
- π° High-quality analogue (ASG, Pilkington) β excellent quality optics, affordable price.
- β οΈ Budget brands - Risk of distortion and installation problems, best avoided.
It is important to understand that for Nissan Note There are different generations (E11, E12, E13), and glass from one model may not fit another due to differences in the curvature and mounting of the rear view mirrors. Before ordering, you must check the vehicle's VIN code with the glass manufacturer's catalog. An error in selection will result in the product simply not fitting into the opening or not fitting properly to the body.
β οΈ Attention: Never install glass from other Nissan models, even if it seems visually similar. Differences in the radius of curvature can lead to the fact that the rubber seal does not close the gap, and water and dust will constantly enter the interior.
Design Features: Sensors, Cameras and Sticker Zones
Modern Nissan Note often equipped with sophisticated security systems integrated into the front glass. It could be rain sensors, light sensors, all-round camera or lane keeping systems. These elements are attached to the inner surface of the glass, and their location is strictly regulated. When replacing, you must make sure that the analogue has identical areas for mounting electronics.
Particular attention should be paid to the area where the rear view mirror is installed. Depending on the configuration, the fastening can be made in the form of a metal bracket or a plastic platform. If you buy glass without this platform, you will need to move the old base, which increases the complexity of the work and the risk of damaging the sensors during dismantling.
- πΉ 360 camera β requires perfect transparency in the central upper part; any defects distort the panorama.
- π§ Rain sensor β has a special optical lens that must exactly match the sensor on the body.
- π Connectors β check the presence of holes for the wiring, otherwise you will have to drill the glass, which is unacceptable.
If your vehicle is equipped with a system Intelligent Around View Monitor, then replacing glass requires mandatory calibration of the camera after installation. Without this procedure, the system may issue false warnings or incorrectly display obstacle boundaries. Calibration is performed only in specialized services using targets and diagnostic equipment.
- Yes, I have
- No, only mirrors
- I don't know for sure
- Planning to install
Materials and tools for windshield replacement
Success of replacement by Nissan Note 80% depends on the materials used. Regular silicone or cheap sealants are not suitable for this task. Do you need a professional polyurethane sealant, which provides high adhesion to body metal and glass, and also maintains elasticity under temperature changes. It is the sealant that works as a force element, holding the glass during side impacts.
The tools should also be prepared in advance. You will need special knives for cutting old sealant, suction cups for moving heavy glass, and a set of hexagons and screwdrivers. Do not attempt to use a utility knife or hacksaw as this may result in personal injury or damage to the body paint.
βοΈ Preparation for glass replacement
The best way to remove old glass is to use string or a special air knife. The string allows you to carefully cut the sealant layer without damaging the body or leaving deep scratches on the metal. If you work together, one person pulls the string from the outside, and the second from inside the cabin, controlling the tension. This is the safest dismantling method.
What to do if the old sealant does not cut?
If the sealant is old and hardened, it must first be heated with a construction hairdryer to a temperature of about 60-80 degrees. This will make it more pliable for cutting with a string. Do not overheat the body to avoid damaging the paint.
Before installing new glass, you must thoroughly clean the seat from any remaining adhesive. Use a special glass cleaner and degreaser. The surface must be absolutely dry and clean. Applying sealant to a dirty surface will cause the glass to peel off during the first wash or strong wind.
β οΈ Attention: Do not allow the new polyurethane sealant to come into contact with the body paint. If you stain the body, immediately remove the stain with sealant solvent before it dries. Cured polyurethane is extremely difficult to remove from paint without damaging the paintwork.
Step-by-step instructions for replacement and installation
The replacement process begins with the careful dismantling of interior elements. On Nissan Note This includes removing the plastic trim on the pillar, rear view mirror (if it is not mounted to the glass) and instrument panel trim. Be extremely careful with plastic latches, as they are often fragile and can break if handled carelessly.
After removing the casing, you can begin to disconnect the sensor wiring. Disconnect the rain sensor and camera connectors, if connected. Then, using suction cups, carefully remove the old glass. Place it on a soft surface to avoid chipping. Clean the car body from sealant residues to bare metal or factory primer.
- π§Ή Cleaning - remove all dust and dirt, use a degreaser.
- ποΈ Primer - Apply primer to the contact area for better adhesion of the sealant.
- π Application - squeeze out the sealant with a snake or a solid line about 10 mm thick.
Install the new glass using the suction cups for precise positioning. Lightly press it against the body until the sealant begins to set. Make sure the gaps are even around the perimeter. After installation, secure the glass to the body with masking tape so that it does not move under its own weight or in a draft.
The polymerization time of the sealant is critical: do not try to operate the car in the first 24 hours after replacement, otherwise the sealant will lose its properties and the glass may fly out upon impact.
Prices and popular brands on the market
Windshield cost for Nissan Note varies widely depending on the manufacturer and configuration. The original can cost from 15,000 to 25,000 rubles, while high-quality analogues (for example, AGC or Guardian) can be found for 8,000 β 12,000 rubles. Budget Chinese brands offer products for 4,000 β 6,000 rubles, but their optical quality often leaves much to be desired.
The table below shows comparative prices for popular glass models for the Nissan Note E12 (the most common version on the secondary market). Prices are indicative and may vary depending on the region and exchange rate.
| Brand | Glass type | Approximate price (RUB) | Features |
|---|---|---|---|
| Nissan (OEM) | Original | 18 000 β 24 000 | Ideal geometry, guaranteed |
| AGC | Analogue | 9 500 β 11 500 | High quality, popular choice |
| Asahi Glass | Analogue | 8 500 β 10 000 | Japanese quality, good optics |
| Starglass | Budget | 5 500 β 7 000 | Available, possible distortion |
The choice of brand depends on your financial capabilities and security requirements. For Nissan Note With cameras and sensors, it is better not to save money and choose a trusted manufacturer, since cheap glass may have optical distortions that will interfere with the operation of security systems. Installing glass with a camera requires mandatory calibration, the cost of which often exceeds the price of the glass itself.
β οΈ Attention: When purchasing glass, check it for defects (scratches, bubbles) right in the store. After installation, it will be impossible to return the defective product, as it will be depressurized.
Care of new glass and operational tips
After successful replacement and polymerization of the sealant (usually after 24-48 hours), the vehicle can be driven. However, in the first weeks, avoid intensive high-pressure washing, especially in the area where the glass and body meet. A jet of water can damage fresh sealant if it has not yet reached its full strength.
Use only high-quality washer fluid and soft wiper blades. Hard brushes and dirty rubber bands can leave deep scratches on the surface, which over time will become hotspots for chipping. Regularly clean the area where the rain sensor is installed from insects and dirt so that it works correctly.
If you notice that your wipers are starting to streak or squeak, replace them immediately. Old brushes create unnecessary friction and can cause microcracks to appear on new glass.
If even a small chip (the size of a coin) appears, contact service immediately for repair. Don't wait for the crack to go further. Repairing a chip on Nissan Note it is inexpensive and takes only 30-40 minutes, while replacing all the glass will cost many times more.
How long should I wait after replacing the glass before I can wash my car?
It is recommended to refrain from high pressure washing the vehicle for the first 3-4 days after replacement. This time is necessary for complete polymerization of the polyurethane sealant. Regular washing with a soft sponge is allowed after 24 hours, but itβs better to be safe.
Is it possible to replace the glass yourself if you have a 360-degree camera?
Technically, it is possible to replace glass, but without professional equipment and camera calibration skills, you risk compromising the operation of security systems. The camera must be calibrated by its tilt angle and position relative to the road. It is recommended to entrust this work to specialists.
What should I do if, after replacing the glass, a whistling or blowing noise appears?
If after replacement you feel a draft or hear a whistle, this indicates poor sealing or improper installation of the glass. Most often, the problem lies in an insufficient amount of sealant or its uneven application. In this case, you need to contact the service for alteration.
Do I need to remove the mirrors when replacing glass on a Nissan Note?
In most cases, the rear view mirror is attached to the glass, so it must be removed along with the glass and then installed on a new one. If the mirror is attached to the body, you do not need to remove it, but you need to disconnect the power connector and carefully move it to the side so as not to damage the wires.