Windshield Nissan Almera G15 - This is not just a body element, but a critical safety component. Visibility, durability in case of an accident, and even the operation of driver assistance systems (if installed) depend on its condition. Owners of this model often face questions: which manufacturer is better, is it possible to save money on an analogue, how to avoid mistakes when replacing? In this article we will analyze all the nuances - from choosing glass to post-warranty care.
Model Almera G15 (2012–2019) was produced for different markets, and the glass for it may differ in thickness, the presence of rain/light sensors, and even in shape - for example, for versions with panoramic roof or sports body kit. We analyzed reviews from car owners, data from dealers and service centers to create the most practical guide possible. Don't have time to read everything? Use section navigation - here you will find answers to specific questions.
Almera G15 windshield design: what you need to know before buying
Glass Almera G15 - this is triplex (multilayer construction of two glasses and a film between them), but its parameters depend on the vehicle’s equipment. Basic versions were equipped with standard glass thickness 4.2 mm, and models with the option Safety Shield (for example, for EU markets) had a strengthened version 4.8 mm with improved sound insulation.
Key elements to pay attention to:
- 🔹 Rain/light sensor: in versions with automatic headlight switching on The sensor is built into the glass near the interior mirror. When replacing, you will have to move or buy glass with a connector for the sensor.
- 🔹 Heating zone: some modifications (for example, for cold climates) have heating threads in the lower part of the glass. Damage to them will result in the airflow not working.
- 🔹 Tinting: factory tinted top ("tape") can be of different densities - from 15% to 30%. This is important for legality in your country.
- 🔹 Manufacturer logo: original glasses are engraved Nissan or AGC (Asahi Glass Co) in the corner. Counterfeiters often tamper with this sign.
Please note: glass for Almera G15 And Almera Classic (based on Renault Symbol) not interchangeable — they have different mounting geometry and angle of inclination. The glass for versions with halogen And xenon headlights (due to different positions of the light beam).
- Original (Nissan/AGC)
- Analog (Pilkington, Saint-Gobain)
- Chinese equivalent
- I don't know
Original vs analogues: comparison of manufacturers and prices
Original glass for Almera G15 produced by the company AGC (Asahi Glass) commissioned by Nissan. Its article number is 26510-BM40A (for versions without sensors) or 26510-BM41A (with rain sensor). Average price in 2026 - 18,000–25,000 rubles, depending on the region and the availability of discounts at the dealer.
Alternative options are cheaper, but not always worse. Here is a comparison table of popular brands:
| Manufacturer | Average price (RUB) | Features | Service life (years) |
|---|---|---|---|
| AGC (OEM) | 18 000–25 000 | Perfect fit, best optics, 2-3 year warranty | 10+ |
| Pilkington | 12 000–16 000 | Good sound insulation, but possible distortion at the edges | 7–9 |
| Saint-Gobain Sekurit | 10 000–14 000 | Lightweight (10% thinner than the original), but does not hold up well against impacts | 5–7 |
| XYG (China) | 5 000–8 000 | Low price, but casting defects are common | 3–5 |
| BOS (Türkiye) | 7 000–10 000 | Average quality, suitable for a budget replacement | 5–6 |
Important: Glass from Pilkington and Saint-Gobain are often supplied under the Nissan brand as "Original Original Equipment" (OES). They are 20–30% cheaper, but the quality is almost as good as AGC. Check the certificate before purchasing ECE R43 - this is a guarantee that the glass has passed crash tests.
⚠️ Attention: When purchasing an analogue, be sure to check VIN code your car with the manufacturer's base. For example, glass for Almera G15 2012 and 2018 may differ in wiper mounts!
Step-by-step instructions for replacing a windshield
Glass replacement Almera G15 - a procedure that is best entrusted to professionals, but if you have the tools and experience, you can do it yourself. The main thing is not to disturb the geometry of the body and apply the glue correctly. Here is the detailed algorithm:
Make sure that the temperature in the garage is not lower than +15°C (the glue will not set in the cold)
Remove the wipers and the plastic trim under the glass (unscrew the 4 clips)
Disconnect the battery to avoid short circuit when working with sensors
Prepare new seals and glue (we recommend 3M Urethane or SikaTack)
-->
Step 1. Removing old glass
Use a special knife for cutting glue (for example, U-POL Glass Removal Knife). Start at the top corner and carefully cut a layer of caulk all the way around. Don't press too hard - you might damage it. welding points on the body. If the glass is cracked, cover it with tape to prevent any broken glass.
Step 2: Surface Cleaning
Remove old adhesive residues using a solvent (eg PPG DX330). Please note drainage holes under glass - they need to be cleaned, otherwise moisture will accumulate. Check the condition of the metal: if there is rust, clean it and treat it anticorrosive.
Step 3. Installing new glass
Apply glue to the body frame solid line (no breaks!). Use a caulking gun with a nozzle 5–7 mm. Install the glass starting from the bottom and press it evenly around the entire perimeter. For fixation, use masking tape (at least 12 strips).
Step 4. Drying and checking
Do not operate the vehicle at a minimum 6 hours (optimally 24 hours). After drying, check:
- 🔧 Tightness: water the glass with water from a hose - there should be no leaks into the interior.
- 🔧 The work of wipers: they should not catch the edge of the glass.
- 🔧 Sensors: if there is a rain sensor, test its operation (pour water on the sensor area).
If after replacement a whistle appears at speeds above 100 km/h, check the fit of the seal in the upper corners of the glass. Often the problem is solved by additional sizing 3M Strip-Calk.
Typical replacement mistakes and how to avoid them
Even experienced craftsmen sometimes make mistakes that later lead to problems. Here are the most common:
- Wrong choice of glue. For example, using silicone instead of polyurethane glue will lead to glass peeling off after a year. For Almera G15 Only class adhesives are suitable DOW BETASEAL or SikaTack Drive.
- Ignoring drainage holes. If they are not cleaned, water will accumulate under the glass, which will lead to corrosion of the body and an unpleasant odor in the cabin.
- Retightening wiper bolts. This will deform the mount and may cause cracks in the new glass. Tightening torque - no more
20 Nm. - Installation without camera calibration. In versions with Nissan Safety Shield After replacing the glass, you need to recalibrate the front view camera (the cost of the service is ~3,000 rubles).
⚠️ Attention: If after replacement there are image distortion (for example, “waves” when viewed through glass), this is a sign of a low-quality analogue or a violation of installation technology. In this case, the glass must be replaced under warranty!
How to care for your Almera G15 windshield: tips for extending service life
Average windshield service life - 5–7 years, but with proper care it can be extended to 10 years or more. Here are the key recommendations:
- 💧 Washing: Use contactless wash or soft sponge. Abrasive brushes leave microcracks, which will eventually turn into chips.
- ❄️ Winter care: Do not pour hot water on frozen glass - temperature changes cause cracks. Use special scraper (For example, Ice Scraper from 3M).
- 🚗 Parking: Park your car away from trees (falling branches) and construction sites (flying stones). If you park in the sun, use sun screen — it reduces glass heating and the risk of cracks.
- 🔧 Repair of chips: Even a small chip (
⌀ 5 mm) may turn into a crack. Use polymer glue (For example, Permatex Windshield Repair Kit) for prompt repairs.
To clean the inside of glass, use special napkins (For example, Invisible Glass) and avoid ammonia-based products - they damage the tint and anti-reflective coating. If there are wiper stains, wipe them isopropyl alcohol (70% solution).
What to do if the glass “fogs up” from the inside?
If the glass fogs up between layers of triplex, this is a sign depressurization. Such glass can only be replaced - it cannot be repaired. If fogging is only on the inside surface, check:
1. Work air conditioner (the cabin filter may be clogged).
2. Tightness door seals.
3. Condition drainage tubes under glass (they could become clogged with leaves).
Almera G15 windshield replacement cost in 2026
The replacement price depends on the type of glass, region and service. Here are the current prices for Russia (as of June 2026):
| Glass type | Cost of glass (rub.) | Cost of work (rub.) | Total (RUB) |
|---|---|---|---|
| Original (AGC) | 18 000–25 000 | 5 000–8 000 | 23 000–33 000 |
| Pilkington (OES) | 12 000–16 000 | 5 000–8 000 | 17 000–24 000 |
| Saint-Gobain | 10 000–14 000 | 5 000–8 000 | 15 000–22 000 |
| Chinese equivalent (XYG) | 5 000–8 000 | 5 000–8 000 | 10 000–16 000 |
Additional costs:
- 🔧 Camera Calibration (if any): 2,500–4,000 rub.
- 🔧 Replacing the seal: 1,500–2,500 rub.
- 🔧 Removing old glue (if required): 1,000–2,000 rub.
You can save money if you buy glass yourself (for example, at Exist.ru or Autodoc) and bring it to the service center. Some workshops give a discount 10–15% with this approach.
Replacing a windshield under CASCO will cost less if you contact a service accredited by your insurance company. In this case you will only pay franchise (usually 5–10% of the cost).
Frequently asked questions about the Almera G15 windshield
Is it possible to drive with a crack in the windshield?
If a crack shorter than 10 cm and does not interfere with the view, it is possible to drive, but not advisable. However, according to Traffic rules of the Russian Federation (clause 4.3), a crack in the wiper operating area or in front of the driver is a reason for a fine (500 rubles). In addition, in the event of an accident, glass with a crack may not withstand the impact and crumble, which is dangerous for passengers.
How to distinguish original glass from a fake?
Original glass AGC has:
- Engraving Nissan or AGC in the lower corner (from the cabin side).
- Smooth edges without burrs.
- Certificate ECE R43 (the number is indicated on the glass).
- Thickness
4.2–4.8 mm(checked with a micrometer).
Counterfeits are often thinner, have jagged edges and lack certification.
How long does it take to replace glass?
In the service, the procedure takes 2–3 hours, but complete polymerization of the glue occurs after 24 hours. At this time you cannot:
- Wash the car with high pressure.
- Drive off-road or at speeds >120 km/h.
- Slam doors (vibration can move glass).
Can I repair a chip in the glass myself?
Yes, if the chip is no more 20 mm in diameter. For this you will need:
- Repair kit (eg. Permatex 08663).
- Ultraviolet lamp (for glue polymerization).
- Alcohol for surface cleaning.
Instructions:
1. Очистите скол спиртом и высушите феном.
2. Установите мост из набора и заполните скол клеем.
3. Накройте плёнкой и осветите УФ-лампой 10–15 минут.
4. Удалите излишки клея лезвием.
If the chip is on the edge of the glass or has “rays” of cracks, repair is useless - you need to replace the glass.
Why did noise appear at speed after replacing the glass?
This is a sign leaky installation. Reasons:
- Poorly cleaned glue from old glass.
- Incorrectly applied sealant (breaks in the line).
- Deformed seal.
Solution: return to service for additional sizing or replacing the seal. If the noise cannot be eliminated, the glass may be defective (uneven geometry).