Light bulbs for Nissan Almera G15: how to choose and replace correctly

Nissan Almera G15 is a popular sedan that is valued for its reliability and unpretentiousness. But even in such a car, lamps burn out over time: low beam, dimensions, brake lights or interior lighting. If you encounter this problem, it is important not only to buy the correct bulb, but also to install it correctly to avoid short circuits or damage to the wiring.

In this article we will look at all types of lamps, used in Almera G15 (2012–2019), their markings, the best manufacturing brands and step-by-step replacement instructions. You will also learn what mistakes owners most often make when choosing lighting and how to avoid them. The material will be useful for both beginners and experienced car owners who want to save money on service stations.

Types of lamps in Nissan Almera G15: complete list with markings

B Nissan Almera G15 More than 15 different types of lamps are used - from standard halogen to LED for dashboard illumination. Below is a table with the main positions, their markings and power.

Lighting type	Lamp marking	Power, W	Quantity in the car
Low beam	H7	55	2
High beam	H1	55	2
Side lights (front)	W5W	5	2
Fog lights (PTF)	H11	55	2
Stop light/reverse	P21/5W	21/5	2

Please note: on some trim levels Almera G15 (For example, Tekna or SV) LED lamps for daytime running lights can be used (LED DRL). Replacing them requires special care as they are sensitive to static electricity.

If you are planning to upgrade your lighting, consider: Replacing halogen lamps with LED lamps in headlights without modifying the reflector can lead to blinding oncoming drivers and a fine from the traffic police. This is due to different focusing of the light flux.

How to choose quality lamps: review of brands and criteria

The car lamp market is full of cheap fakes that quickly burn out or produce dim light. In order not to make a mistake with your choice, focus on proven brands and key parameters:

• 🔦 Osram And Philips - leaders in reliability. Their lamps H7 And H1 last 30–50% longer than analogues, and the luminous flux meets standards ECE.
• 💡 Narva And Bosch — optimal price/quality ratio. Suitable for budget replacement.
• ⚡ Koito And PIAA — premium lamps with increased luminous flux (up to +130% brightness), but cost 2–3 times more.
• 🚫 Avoid brands without certification ECE or DOT - they often give off a cold blue light that does not illuminate the road well in the rain.

When purchasing, pay attention to plinth (must match the markings in the table above) and color temperature:

• 🟡 3000–3500K — warm yellow light, better for fog.
• 🟢 4000–4300K — neutral white, optimal for city driving.
• 🔵 5000K+ — cold blue, impairs visibility in bad weather (prohibited for halogen headlights).

Step-by-step instructions: how to replace a low beam lamp

Replacing the low beam lamp in Nissan Almera G15 - one of the most common procedures. You don't need to remove the headlight to do this, but you will need to be careful not to damage the plastic latches. Follow the algorithm:

1. Disconnect the battery. Remove the negative terminal to avoid short circuit.
2. Remove the protective cover headlights. It is attached to three plastic latches (press them and pull the casing towards you).
3. Disconnect the power connector from the lamp. To do this, press the latch and carefully pull out the block.
4. Take out the old lamp. Press the spring clip (it is metal, located on top) and pull the lamp towards you.
5. Install a new lamp. Insert it into the base without touching the glass bulb (grease marks will shorten the service life). Secure with a spring clip.
6. Reassemble everything in reverse order. Make sure the headlight housing fits snugly, otherwise moisture will get inside.

⚠️ Attention: If the lamp does not light up after replacement, check the fuse F35 (10A) in the fuse box under the hood. He is responsible for the low beam circuit. Also inspect the connector for oxidation.

What to do if the lamp burns out quickly?

There may be several reasons: voltage surges in the on-board network (check the generator), moisture getting into the headlight or a poor-quality lamp. If the problem persists, install voltage stabilizer or contact an auto electrician for diagnosis.

Replacing lamps in the rear lights: brake lights, clearance lights, turn signals

Unlike the headlights, the taillights are Almera G15 have a common block where the brake lights, parking lights and turn signals are located under one cover. To get to them:

1. Open the trunk and remove the trim from the canopy side (it is secured with clips).
2. Remove the two plastic screws holding the light block in place.
3. Carefully pull the unit towards you (do not pull the wires!).
4. Turn the socket of the desired lamp counterclockwise and remove it.
5. Replace the lamp with a new one (eg P21/5W for the brake light) and reassemble everything in reverse order.

⚠️ Attention: When replacing a brake light bulb, do not confuse it with a reverse light bulb (W16W). They are similar in appearance, but have different power and contact locations. If you put in the wrong lamp, it will either not work or will burn out within a few days.

If the brake lights are dim or flashing after replacement, check:

• 🔌 Contacts in the cartridge for oxidation (clean with sandpaper or WD-40).
• 🔋 Voltage on the connector (should be ~12V when the ignition is on).
• 🔧 Integrity of the mass wire (it is attached to the body next to the lamp).

LED lamps in Almera G15: can they be installed and which ones to choose?

Many owners Almera G15 want to switch to LED bulbs because of their durability and brightness. However, there are nuances here:

• ✅ Allowed install LED lamps in:
  • Side lights (W5W), if they do not blind.
  • Interior and trunk lighting.
  • Daytime running lights (if they are not combined with low beam).
• ❌ Prohibited put LEDs in:
  • Low/high beam (H7/H1) if the headlight is not designed for LED.
  • Fog lights (H11), since they produce a directed beam of light.

If you still decide to install LEDs in the low beam, choose models with correct light spot, for example:

• 🔦 Philips X-tremeUltinon — certified for public roads.
• 💡 Osram LEDriving HL — have a built-in driver for stable operation.

⚠️ Attention: After installing LED lamps in low beam, be sure to adjust the light beam on the stand. Incorrect settings will result in blinding oncoming drivers and a fine. Part 3 Art. 12.5 Code of Administrative Offenses of the Russian Federation (deprivation of rights for 6–12 months).

Common mistakes when replacing lamps and how to avoid them

Even experienced car owners sometimes make mistakes that lead to rapid lamp burnout or electrical damage. Here are the most common of them:

1. Touching a halogen lamp bulb with bare hands. Fatty traces lead to local overheating and shorten service life. Always use gloves or a cloth.
2. Using high power lamps. For example, setting H7 100W instead of standard 55W leads to melting of the wiring and diffuser.
3. Incorrect installation of the plinth. If the lamp H1 or H7 If not inserted fully, it will heat up and quickly fail.
4. Ignoring errors on the dashboard. If the fault indicator (for example, Check Bulb), check fuses and contacts.

Another typical problem is condensation inside the headlight. It appears if the protective casing is not sealed when replacing the lamp. To remove fogging:

1. Remove the cover and dry the headlight with a hairdryer (do not overheat!).
2. Check the ventilation holes at the bottom of the headlight to ensure they are not clogged with dirt.
3. Apply sealant to the casing joints before installation.

Where to buy lamps for Nissan Almera G15: verified stores and prices

Light bulbs for Almera G15 can be purchased at auto stores, online marketplaces or from official dealers. Here are the average prices for popular models (for 2026):

Lamp type	Brand	Price for 1 piece, ₽	Where to buy
H7 (low beam)	Osram Original	450–600	Wildberries, Exist.ru
H1 (high beam)	Philips LongLife	500–700	Ozon, AvtoSvet
W5W (dimensions)	Narva Standard	80–120	Any auto shop
P21/5W (stop light)	Bosch Pure Light	150–200	Exist.ru, AvtoProfi

Buying Tips:

• 🛒 In offline stores (for example, AutoSvet or Lukoil-Auto) you can check the lamp for functionality before purchasing.
• 🌍 On Wildberries And Ozon There are often discounts, but the risk of running into a fake is higher. Check the seller's reviews and ratings.
• 🔧 From official dealers Nissan lamps are more expensive (20–30%), but you get a guarantee and original packaging.

If you buy lamps online, pay attention to country of origin. For example, Philips And Osram Lamps are produced in Germany and Poland, and fakes usually come from China without certificates.

FAQ: answers to frequently asked questions about light bulbs in the Nissan Almera G15

Is it possible to install xenon in Almera G15 instead of halogen?

No, unless your car is equipped with xenon headlights with factory lens and washer. Installing xenon in halogen headlights prohibited (fine 500 ₽ per Part 1 Art. 12.5 Code of Administrative Offenses of the Russian Federation), as it blinds oncoming drivers. An alternative is high-quality halogen lamps with temperature 4000K (For example, Osram Night Breaker).

Why does the low beam lamp shine dimly after replacing it?

There may be several reasons:

1. Poor contact in the connector (clean up oxidation).
2. Low voltage in the on-board network (check the generator).
3. The lamp is of low quality or counterfeit (compare with the original packaging).
4. The headlight lens is cloudy (needs polishing).

How to check which bulb has burned out in the rear light?

Turn on the ignition and alternately activate:

• 🚦 Dimensions - if one side does not light, the problem is in the lamp W5W.
• 🛑 Stop light - press the brake pedal (lamp P21/5W).
• 🔄 Turn signal - turn on the pointer (lamp PY21W).
• 🔙 Reverse - turn on the gear (lamp W16W).

If the lamp is intact but does not light, check the fuse F20 (10A) in the cabin block.

How long do lamps last in Almera G15?

The service life depends on the type of lamp and operating conditions:

• 💡 Halogen (H7, H1) — 400–600 hours (2-3 years with average mileage).
• 🔦 LED - up to 30,000 hours (10+ years), but only if installed correctly.
• 🚨 Incandescent lamps (W5W, P21W) — 100–200 hours (change most often).

To extend the life of the lamps, avoid running the headlights at idle for long periods of time (the generator does not provide enough voltage).

Is it possible to polish cloudy headlights yourself?

Yes, for this you will need:

1. Sandpaper P800, P1200, P2000.
2. Polishing paste (eg 3M or Meguiar's).
3. Polishing machine or drill with attachment.
4. Plastic protection varnish (e.g. Delta Kits).

⚠️ Attention: Do not polish headlights “dry” - this will lead to microcracks. Use water and gentle movements.