Owners Nissan Qashqai J10 (first generation, 2007–2013) sooner or later they are faced with the need to replace lamps - be it a burnt-out brake light, dim low beam, or a failed license plate light. At first glance, the task seems simple, but in practice many are faced with confusion regarding the types of bases, power, and even legal nuances (for example, lamp certification for use on public roads).

In this article we will look at all types of lamps, used in Qashqai J10, - from headlights to dimensions and interior lighting. You will find out what lamps with H7 and HB4 sockets are often counterfeited on the market, how to choose the right LED analogues without the risk of dazzling oncoming drivers, and why cheap “Chinese” lamps can lead to CAN bus error on the dashboard. We will also provide step-by-step instructions for replacement with photos and videos, compatibility tables and answers to frequently asked questions - from the legality of xenon to choosing the color of LEDs for PTF.

Types of lamps in Nissan Qashqai J10: complete list with sockets

Optics design Qashqai J10 depends on the configuration and year of manufacture, but in most cases standard bases are used. Below is an expanded table indicating original catalog numbers and popular analogues.

Application area Base type Power, W Original number Popular analogues
Low beam (halogen) H7 55 26510-4M00A Osram Night Breaker, Philips X-tremeVision, Bosch Pure Light
High beam HB3 (9005) 60 26520-4M00A Narva Range Power, GE Megalight Ultra
Fog lights (PTF) H8 (HB4) 35 26540-4M00A Philips WhiteVision, Osram Cool Blue
Side lights (front) W5W (T10) 5 26530-4M00A LED analogues of SMD 5050, Narva Longlife
Rear brake lights/dimensions P21/5W 21/5 26560-4M00A Osram Original Line, Philips LongLife

⚠️ Attention: In versions with xenon headlights (optional Bi-Xenon in complete sets Tekna And Acenta Premium) lamps are used D1S (near/far). Replacing them with LEDs or halogen illegal without installing washers and auto-corrector - this is fraught with deprivation of rights under Art. 12.5 Code of Administrative Offenses of the Russian Federation.

To accurately determine the type of bulbs in your car, check:

  • 📄 Instructions for use (section “Technical data”).
  • 🔍 Marking on the lamp itself (visible after dismantling).
  • 🖥️ Online catalogs by VIN (for example, Nissan EPC or Autodoc).
📊 Which lamps do you prefer in the Qashqai J10?
  • Halogen (standard)
  • Light-emitting diode (LED)
  • Xenon (if installed)
  • I don't know which ones are worth

How to choose lamps: halogen vs LED vs xenon

The choice of lamp type depends on budget, goals (comfort, style, legality) and willingness to tinker with the settings. Let's look at the pros and cons of each option.

Halogen lamps

Pros:

  • ✅ Legality - do not require modifications to the optics.
  • ✅ Low price — from 300 rubles per pair Osram Standard.
  • ✅ Easy to replace - original connectors fit.

Cons:

  • ❌ Service life — 400–600 hours (LED lasts 5–10 times longer).
  • ❌ Thermal heating — headlights can melt the plastic if there is poor ventilation.

Light Emitting Diodes (LED)

Pros:

  • ✅ Brightness - up to 6000 lm (versus 1500 lm for halogen).
  • ✅ Energy efficiency — consume 3–4 times less energy.
  • ✅ Color temperature - from warm yellow (3000K) to cool white (6000K).

Cons:

  • ❌ Price — high-quality LED lamps (for example, Philips Ultinon) cost from 5,000 rubles per pair.
  • ❌ Legal risks — non-certified LEDs in headlights are equivalent to non-standard equipment (fine 500 rub. Part 1 Art. 12.5 Code of Administrative Offenses).
  • ❌ Problems with the CAN bus - cheap lamps can cause error P0600 (light circuit malfunction).
💡

Before purchasing LED lamps, check for the sign E22 (certification for Russia) on the packaging. Without it, lamps are considered counterfeit and their use on public roads is prohibited.

Xenon lamps

Installed only in standard bi-xenon headlights (configurations Tekna). Self-installation of xenon in halogen optics prohibited and is punishable by deprivation of rights for 6–12 months.

If xenon is installed from the factory, use lamps D1S with color temperature 4300K–5000K (For example, Osram Xenarc Original). Lamps with temperatures above 6000K (“blue xenon”) reduce visibility in rain and fog.

💡

To legally use LED lamps in headlights, you must have a certificate of conformity TR TS 018/2011 and markings E22 on optics. Without this, the traffic police inspector has the right to issue a fine.

Step-by-step instructions for replacing low beam lamps (H7)

Replacing the low beam lamp with Qashqai J10 takes 15–20 minutes. You will need:

  • 🔧 Flat screwdriver (for removing clips).
  • 🧤 Gloves (so as not to leave greasy marks on the flask).
  • 💡 New lamp H7 (do not touch the glass with your bare hands!).

Procedure:

  1. Open the hood and disconnect the negative terminal of the battery (to avoid short circuit).
  2. Remove protective rubber cover from the back of the headlight, pulling it towards you.
  3. Disconnect power connector from the lamp by pressing the latch.
  4. Remove the lamp from the grooves by turning it counterclockwise at 90°.
  5. Install a new lamp, without touching the flask, and lock it by turning it clockwise.
  6. Connect the connector, put on the cover and check the operation of the light.

Make sure the headlight cover fits snugly (otherwise moisture will get in)|

Check light adjustment (adjustment may be required when replacing with LED)|

Reset CAN bus error (if the light bulb icon on the panel lights up)|

Check the temperature of the headlight after 10 minutes of operation (overheating indicates poor contact) -->

⚠️ Attention: If, after replacement, the dashboard lights up lamp error, the reasons may be as follows:

  • 🔌 Poor contact in the connector (check for oxidation).
  • 💡 Incompatible lamp (for example, LED without a CAN bus trick).
  • 🔧 Damaged light control unit (diagnostics required).

Replacing lamps in the rear lights (P21/5W and W16W)

Tail lights Qashqai J10 are combined into a single unit, and to replace the lamps you need to remove the plastic cover in the trunk. The main difficulty is fragile latches, which are easy to break if dismantled carelessly.

Tools: flat screwdriver, flashlight.

Algorithm:

  1. Open the trunk and remove the trim from the side of the lantern (it is attached with clips).
  2. Unscrew two screws flashlight mountings (they can be hidden under plugs).
  3. Carefully pull out the lamp unit on yourself, do not pull the wires!
  4. Turn the lamp socket counterclockwise and remove it.
  5. Install a new lamp (eg Osram P21/5W) and reassemble everything in reverse order.

⚠️ Attention: When replacing the brake light bulb (P21/5W) do not confuse it with the reverse lamp (W16W) - they are similar in appearance, but have different power and base. Installing the wrong lamp will result in cartridge overheating and its melting.

What should I do if the reverse lamp does not light up after replacement?

If the new lamp W16W doesn't work, check:

1. **Fuse F37 (10A)** in the fuse box (located under the steering wheel).

2. **Contacts in the cartridge** - often oxidize due to moisture.

3. **The performance of the gearbox limit switch** (it may be faulty if the lamp does not light up when reverse gear is engaged).

If the problem is not solved, you need to diagnose the wiring with a multimeter.

LED lamps in PTF: legal or not?

Replacing halogen lamps H8 (HB4) in foglights, LEDs are a popular solution, but with legal nuances. According to GOST R 41.48-2004, only lamps with the marking are allowed in the PTF «D» (halogen) or «DC» (xenon, if installed from the factory). LED lamps are not included in this list.

However, in practice:

  • 🚔 Traffic police inspectors lamps in the PTF are rarely checked (unlike the headlights).
  • ⚖️ Fine for non-standard LEDs in PTF - 500 rubles (Part 1 Art. 12.5 Code of Administrative Offenses).
  • 🔦 Technical regulations does not directly prohibit LED in PTF, but requires certification optics.

If you decide to install LED in PTF, choose models with:

  • 🔹 Color temperature 3000K–4000K (do not dazzle and shine well in fog).
  • 🔹 Built-in driver (for stable operation during power surges).
  • 🔹 Marked E22 (confirmation of legality).

Examples of legal LED lamps for PTF:

  • 💡 Philips WhiteVision LED H8 (4000K, certified for Russia).
  • 💡 Osram LEDriving FOG H8 (3000K, with moisture protection).

Common mistakes when replacing lamps and how to avoid them

Even experienced car owners make mistakes that lead to damage to optics, short circuit or fines. Let's look at the most common ones:

  1. Touching a halogen lamp with bare hands.

    Fatty traces on the flask lead to uneven heating and premature burnout. Use gloves or a cloth.

  2. Using LED without CAN bus interference.

    Cheap LED lamps have low resistance, and the control unit perceives them as burnt out, giving an error. Solution - installation fake resistors (For example, Canbus LED Error Free).

  3. Incorrect adjustment after replacement.

    LED lamps often have another light border, which causes the headlight to blind oncoming drivers. After replacement, be sure to adjust the light to wall or special stand.

  4. Purchasing lamps without a certificate.

    Lamps without markings E22 or DOT may not only result in a fine, but also melt in the headlight due to poor quality materials.

💡

If, after replacing the lamp with LED, condensation appears in the headlight, this is a sign leakage. Immediately check the rubber boot for cracks and replace it (original number - 26515-4M00A).

FAQ: Answers to popular questions

Is it possible to install xenon in the halogen headlights of the Qashqai J10?

No. Installing xenon in optics not intended for it, prohibited by Art. 12.5 Code of Administrative Offenses of the Russian Federation and is punishable by deprivation of rights for 6–12 months. In addition, xenon in the halogen headlight blinds oncoming drivers due to incorrect light beam.

Which H7 bulbs are the brightest for Qashqai J10?

Based on test results ADAC 2023, the best halogen lamps H7 by brightness:

  1. Osram Night Breaker Laser (+150% light, 4500K).
  2. Philips X-tremeVision Pro150 (+150%, 3700K).
  3. Bosch Gigalight Plus 150 (+150%, 3900K).

For LED the best choice is Philips Ultinon Pro9000 H7 (6000 Lm, 6000K), but requires a CAN bus snag.

Why does H7 burn out quickly after replacing the lamp?

Reasons:

  • 🔋 Overvoltage in the on-board network (check with a multimeter, the norm is 13.8–14.4V).
  • 💧 Moisture in the headlight (leads to contact corrosion).
  • 🔌 Poor contact in the connector (oxidation or burning).
  • 🔦 Low quality lamps (for example, without gas filling the flask).

Solution: clean the contacts, check the tightness of the headlight and install lamps with an increased resource (for example, Narva Longlife).

How to remove the headlight on a Qashqai J10 to replace the lamp?

To completely remove the headlight:

  1. Remove the bumper (unscrew the 4 bolts from the bottom and 2 bolts from the sides).
  2. Disconnect the PTF and turn signal connectors.
  3. Unscrew the 3 headlight mounting bolts (10 mm).
  4. Carefully pull out the headlight, do not pull on the wires!

⚠️ Attention: When removing the headlight do not disconnect the xenon ignition unit connector (if there is one) - this can damage the ballast!

Which lamps are suitable for the interior lighting of the Qashqai J10?

The following lamps are used in the interior and trunk:

  • C5W (interior lamp) - original 26410-4M00A.
  • W5W (glove compartment lighting, mirrors) - original 26420-4M00A.
  • DE3175 (number light) - original 26430-4M00A.

To replace with LED, choose lamps with low heat (For example, SMD 2835), so as not to melt the plastic of the lampshade.