Nissan Wingroad is a popular compact van that is valued for its practicality and reliability. However, the trunk lid (or, as it is also called, the “fifth door”) often becomes a weak point: it is susceptible to corrosion, mechanical damage and wear of the hinges. In this article, we will look at how to choose the right new cover, replace it yourself, and also consider tuning and repair options.
Not only the appearance of the car, but also its functionality depends on the condition of the trunk. For example, skewed lid may lead to water leaking into the cabin, and worn hinges - to spontaneous opening on the go. We have collected all the necessary information to help you avoid common mistakes and save on service costs.
Original and similar trunk lids: what to choose?
When purchasing a new trunk lid for Nissan Wingroad (body Y10, Y11, Y12) it is important to consider not only the price, but also the quality of the material, compatibility with fasteners and the presence of additional elements (glass, seals, lock). Original parts from Nissan guarantee a perfect fit, but may cost more 30–50 thousand rubles depending on the generation.
An alternative is non-original covers from trusted manufacturers such as Febi, Dorman or Genuine. They are 30-40% cheaper, but require careful checking to ensure compliance with dimensions and fastenings. Pay special attention to:
- 🔹 Material: The original is usually made of galvanized steel, analogues are made of thinner metal or plastic.
- 🔹 Options: in some cases you will have to purchase additional hinges, lock or glass separately.
- 🔹 Blossom: Aftermarket parts are often supplied with a primer, which will require additional painting.
If your budget is limited, you can consider the option used lid from Japan. Such parts are sold at disassembly sites (for example, CarFromJapan or JDM Buy Sell) and cost 2–3 times cheaper than new ones. However, the risk of purchasing a rusty or damaged part remains high.
- Original (Nissan)
- Unoriginal (Febi, Dorman)
- Used from disassembly
- I haven't decided yet
Step-by-step instructions for replacing the trunk lid
Replacing the trunk lid with Nissan Wingroad - a task of medium complexity that requires accuracy and the availability of tools. On average it takes to work 2–3 hours. Below is an algorithm of actions for the body Y11 (2005–2012), but it is also relevant for other generations with minor adjustments.
Required tools:
- 🔧 Socket wrenches on
10,12,14. - 🔧 Screwdrivers (phillips, flat).
- 🔧 Jack or assistant to support the lid.
- 🔧 WD-40 or similar lubricant for rusty bolts.
Work order:
- Open the trunk and secure the lid in the open position (for example, with a wooden block).
- Remove the inner trunk trim by detaching the plastic clips. Underneath you will find the hinge fastenings.
- Unscrew the bolts holding the hinges (usually 2-3 bolts on each side). Models after 2010 may use Torx head bolts (T30), so have the appropriate wrench ready in advance.
- Remove the old cover by disconnecting the electrical wiring (if there is heated glass or sensors).
- Install the new cover in reverse order, after lubricating the hinges.
☑️ Preparing to replace the trunk lid
After installation, be sure to adjust the position of the cover so that it fits snugly against the body. To do this, loosen the hinge bolts and adjust the gaps.
If the trunk lid does not close well after replacement, check the condition of the rubber seals. They can be restored using silicone grease or replaced with new ones (item number for Wingroad Y11: 80310-4M000).
Tuning the trunk lid: from spoiler to tinting
The trunk lid is an excellent area for tuning, which can improve both the appearance and functionality of the car. Here are some popular options:
1. Installation of the spoiler
The spoiler on the trunk lid not only gives Wingroad sporty look, but also improves aerodynamics at high speeds. For Nissan Wingroad universal spoilers from Evo-R or TRD, as well as original parts from Nissan Primera (body P12). Average cost - 5–15 thousand rubles.
2. Tinting or glass replacement
The glass in the trunk lid can be tinted with film (for example, LLumar or SunTek) or replace with tinted original glass (item: 26500-4M000). This will protect the trunk from sunlight and give the car a more stylish look.
3. LED backlight
Installing an LED strip along the contour of the trunk lid or under the spoiler will add individuality. To connect, use a relay from the dimensions or a separate switch. It is important to choose waterproof LEDs (class IP67 and above).
4. Vinyl wrap
Full or partial wrapping of the trunk lid with vinyl film (for example, 3M or Oracal) will protect it from scratches and corrosion. Popular options: matte, glossy or “carbon” texture.
How to avoid mistakes when tuning?
Do not use cheap Chinese spoilers - they often fall off at speed due to poor glue. For secure fixation, use double-sided tape 3M VHB and additionally attach the spoiler to the screws. When tinting glass, avoid films that are too dark (less than 35% light transmission) so as not to violate traffic regulations.
Typical problems and their solutions
trunk lid Nissan Wingroad can cause trouble even with careful use. Let's look at the most common problems and how to fix them.
1. The lid does not close or opens spontaneously
Reasons:
- 🔧 Wear of hinges (replacement or lubrication required).
- 🔧 The lock is broken (check the microswitch and spring).
- 🔧 Lid skewed (adjustment required).
2. Creaking or knocking when opening
Most often caused lack of lubrication in the hinges or their corrosion. Solution:
- Clean the hinges from dirt with a wire brush.
- Apply lubricant (eg Liqui Moly LM 40).
- If the hinges are very worn, replace them (part number for Wingroad Y10:
80710-4M000).
3. Water leaks into the trunk
Water can penetrate through:
- 💧 Damaged seal (replace with a new one, article number:
80310-4M010). - 💧 Cracks in glass (repair with polymer or replacement).
- 💧 Corrosion in places where hinges are attached (cleaning and anti-corrosion treatment).
If the trunk lid is deformed after an accident, do not try to straighten it yourself - this may disrupt the geometry of the body. In such cases, it is more advisable to buy a new part.
Comparison of prices for spare parts and labor
The cost of the trunk lid and associated labor varies depending on the region and the parts selected. Below is a comparison table for Nissan Wingroad Y11 (2005–2012).
| Spare part/service | Original (Nissan) | Unoriginal (Febi, Dorman) | Used (disassembly) |
|---|---|---|---|
| Trunk lid (assembled) | 45 000 – 60 000 ₽ | 25 000 – 35 000 ₽ | 10 000 – 20 000 ₽ |
| Hinges (set) | 8 000 – 12 000 ₽ | 3 000 – 5 000 ₽ | 1 500 – 3 000 ₽ |
| Trunk lock | 5 000 – 7 000 ₽ | 2 000 – 4 000 ₽ | 1 000 – 2 500 ₽ |
| Sealant | 2 500 – 3 500 ₽ | 1 000 – 2 000 ₽ | 500 – 1 500 ₽ |
| Replacing the cover (work) | 3 000 – 6 000 ₽ | ||
As can be seen from the table, self-replacement allows you to save on work, but requires time and skills. If you are not confident in your abilities, it is better to contact the service.
Anti-corrosion treatment: how to protect the trunk lid?
trunk lid Nissan Wingroad particularly vulnerable to corrosion due to constant exposure to moisture and reagents. To extend its service life, it is recommended to anti-corrosion treatment at least once every 2–3 years.
Materials for processing:
- 🛡️ MoviL - for hidden cavities.
- 🛡️ Dinitrol - for external surfaces.
- 🛡️ Zinkor - to restore damaged areas.
Step by step instructions:
- Wash and dry the trunk lid thoroughly.
- Clean off any rust with sandpaper or a metal brush.
- Treat cleaned areas with a rust converter (e.g. Hi-Gear).
- Apply 2-3 layers of anti-corrosion coating, paying special attention to:
- 🔹 Places for attaching loops.
- 🔹 Bottom edge of the lid (under the seal).
- 🔹 The corners of the glass.
For long-term protection, you can install mud flaps on the rear bumper (article: 62610-4M000) - they will reduce the ingress of dirt onto the lid.
Before winter, treat the rubber seals with silicone grease - this will prevent them from freezing to the body and extend their service life.
Where can I buy spare parts for the trunk lid?
Purchase original and non-original spare parts for Nissan Wingroad possible in the following places:
1. Official dealers Nissan
Pros: parts warranty, 100% compatibility.
Cons: high price, long wait (if the spare part is on order).
2. Online stores
Popular platforms:
- 🌐 Exist.ru — a wide range of original and analog spare parts.
- 🌐 Emex.ru — there are often discounts on non-original parts.
- 🌐 JP-Car.ru — specializes in Japanese used spare parts.
3. Showdown
Suitable for purchasing used parts:
- 🔧 CarFromJapan — Japanese disassembly with a guarantee.
- 🔧 AutoJapan - large selection of spare parts for Wingroad.
- 🔧 Local showdowns (for example, Auto analysis in Moscow or St. Petersburg Avtorasbor).
When purchasing a used trunk lid, be sure to request a photo:
- 📸 Inner side (to check corrosion).
- 📸 Loops and lock.
- 📸 Glass (for cracks).
Before purchasing a spare part, check its part number with the catalog Nissan. For example, the trunk lid for Wingroad Y10 (1996–2005) has article number 62600-4M000, and for Y11 — 62600-4M100.
⚠️ Attention! When purchasing a trunk lid from disassembly, make sure that it is suitable for your modification Wingroad. For example, covers for versions with heated glass and without it have different wiring.
FAQ: Frequently asked questions about the trunk lid Nissan Wingroad
Is it possible to install a trunk lid from another Nissan (eg Primera or Almera) on the Wingroad?
No, trunk lids are from other models Nissan are not suitable for fastenings and sizes. An exception is some details from Nissan AD (body Y11), but they require improvement.
How often should the trunk lid hinges be lubricated?
It is recommended to lubricate the hinges every 10–15 thousand km or once a year. Use graphite or lithium grease (eg Liqui Moly LM 40).
What to do if the glass in the trunk lid is cracked?
Small cracks (up to 10 cm) can be repaired using polymer adhesive (for example, Permatex). If the crack is large or the glass is broken, replacement is required (part number for Wingroad Y11: 26500-4M000).
Can I paint the trunk lid myself?
Yes, but for a quality result you will need:
- 🔹 Grinder or sandpaper (grit
P800–P1200). - 🔹 Primer and paint (choose according to the color code of your Wingroad).
- 🔹 Varnish (for protection and shine).
If you have no experience, it is better to contact a car service - the cost of painting the trunk lid is 5–10 thousand rubles.
How to eliminate creaking hinges without replacement?
Creaking hinges most often occurs due to:
- 🔹 Dirt hits (clean the loops and lubricate).
- 🔹 Wear out the bushings (replace with polyurethane ones).
- 🔹 Corrosion (clean and treat Zinkor).
If you haven’t found the answer to your question, clarify the details in the comments or contact a specialist Nissan.