<em>Nissan Atlas</em> wings: how to choose, replace and save without losing quality

Nissan Atlas (also known as Navara D22/D23 in different regions) is a legendary pickup truck, valued for its reliability and cross-country ability. However, even such an “indestructible” car is not insured against corrosion, mechanical damage or accidents, where it is the front and rear wings. In this article we will look at how to choose the right wings for Atlas, how original parts differ from analogues, and whether it is possible to save money without a safety risk.

Feature Nissan Atlas - its universal platform, which was used in other models Nissan (For example, Pathfinder R50 or Terrano II). This means that some fenders may fit more than one vehicle, but it is important to take into account the year of manufacture, body type (single/double cab) and even the market (Japanese, European or Asian versions). The wrong choice will lead to problems with installation, clearances or mismatched fasteners.

In the article you will find:

• 🔍 How to identify the original wing by catalog numbers and visual features.
• 💰 Price comparison for new, used and replica fenders for Atlas D22/D23.
• 🔧 Step-by-step replacement instructions with nuances for different body types.
• ⚠️ Common mistakeswhich lead to corrosion or poor fit of the part.

Original vs. non-original wings: what to choose for Nissan Atlas

The first question that arises when searching for spare parts: buy original fenders from Nissan or pay attention to analogues? Original parts guarantee a perfect fit, but their price can be 2-3 times higher than the cost of analogues. For example, a new front wing on Atlas D22 (catalog number 62100-4M000 or 62100-4M001 for right/left side) at official dealers will cost 18–25 thousand rubles (for 2026). At the same time, analogues from Febi, Meyle or Hans Pries can be found for 8–12 thousand rubles.

The main advantages of the original wings:

• 🔹 Exact match of fastenings — no need to drill new holes or adjust the part.
• 🔹 Factory anti-corrosion treatment (galvanizing or primer), which extends service life.
• 🔹 Manufacturer's warranty (usually 1-2 years for new parts).

However, analogues also have advantages:

• 💰 Price is 30–50% lower, which is important for budget repairs.
• 🛠️ Wide range of materials: from steel to aluminum or plastic (for tuning versions).
• 📦 Delivery upon order often takes less time than waiting for the original.

⚠️ Attention: When purchasing non-original wings, check the certificates of conformity ECE R10 (European safety standard). Cheap replicas without certification may not withstand the impact of an accident.

If you choose an analogue, pay attention to the brands:

• 🏆 Febi (Germany) - optimal price/quality ratio, suitable for 90% of models Atlas.
• 🛡️ Meyle — reinforced parts with improved anti-corrosion protection.
• 🔧 Hans Pries - a budget option, but requires additional processing before painting.

Wing part numbers for Nissan Atlas D22/D23 by year

To avoid making a mistake with your choice, be sure to check with VIN code your car or catalog numbers. Wings for Atlas vary depending on:

• 📅 Year of manufacture (pre-restyle 1997–2001 vs. restyle 2001–2005).
• 🚗 Body type (King Cab, Double Cab, Single Cab).
• 🌍 Sales market (Japanese, European or Asian versions may have different mountings for headlights or bumpers).

Model/Year	Front fender (left)	Front fender (right)	Rear fender (left/right)
Atlas D22 (1997–2001)	62100-4M000	62100-4M001	62600-4M000 / 62600-4M001
Atlas D22 (2001–2005, restyled)	62100-4M100	62100-4M101	62600-4M100 / 62600-4M101
Atlas D23 (2005–2014)	62100-BM400	62100-BM401	62600-BM400 / 62600-BM401

For the rear wings Atlas D22/D23 universal parts are often used, but it is important to consider the availability running boards or wheel arch extensions (for example, for versions with increased ground clearance). If your pickup is equipped 4WD, check the compatibility of the fenders with the transmission protection - some analogs may not fit in geometry.

Where can I look for catalog numbers?

• 📄 B repair manual (For example, Nissan Service Manual for your model).
• 🔧 On spare parts websites: Amayama, BuyCarParts, Exist.ru (you can enter the VIN there and get an accurate list).
• 📱 In mobile applications like AutoDoc or PartsLink24.

Step-by-step instructions for replacing the wing with Nissan Atlas

Replacing a wing is a moderately difficult operation that you can do yourself if you have the tools and patience. A car service center will charge from 5 to 10 thousand rubles for this work (depending on the region), but if you are willing to spend a weekend, you will save a lot. Below - step-by-step algorithm for the front wing (the rear wing is changed in the same way, but simpler).

Required tools:

• 🔨 A set of sockets and keys (required) 10 mm, 12 mm, 14 mm).
• 🔧 Screwdrivers (phillips and flat).
• 🔪 A hacksaw or grinder (if the wing is welded).
• 🧲 Magnet for collecting bolts (so as not to lose fasteners).
• 🎨 Putty, primer, paint (if the wing is unpainted).

Procedure:

1. Remove the bumper and headlight.

   Disconnect the battery (remove the terminal «−»). Unscrew the bumper mounting bolts (usually 4-6 pieces from the bottom and sides). Disconnect the headlight connectors and remove it, first marking the position of the adjusting screws with a marker.

2. Remove the old fenders.

   Unscrew all the bolts around the perimeter of the wing (there can be 8–12 of them). If the wing is welded (often found on older D22), carefully cut off the weld points with a grinder. Be careful not to damage the body pillar!

3. Prepare the surface.

   Clean the mounting points from rust and old paint. Treat with an anticorrosive agent (for example, Movi or Tectyl). If there are dents in the strut, straighten them out before installing the new fender.

4. Install a new wing.

   Try on the part, aligning the holes. Tighten the bolts diagonallyto avoid distortions. If the wing does not have holes for a turn signal or mirror, drill them according to the template.

5. Painting and assembly.

   If the wing is unpainted, apply primer, paint and varnish (we recommend using DuPont or Sikkens for durability). Reinstall the headlight, bumper and connect the electrical.

I photographed the fastenings of the old wing|Disconnected the battery|Prepared anticorrosive and primer|Checked the compatibility of the new wing using the catalog number|Stock bolts and nuts (in case of loss)-->

⚠️ Attention: On Nissan Atlas D23 (2005+) front fender can be attached to bumper amplifier. If you do not unscrew it in advance, you may bend the frame during dismantling!

Fender tuning and modifications: extensions, protection, style

Many owners Atlas are not limited to standard wings, but install modified versions to improve appearance or functionality. Let's consider popular options:

1. Fender flares

• 🚙 For large wheels: if you installed wheels of size 33″+, standard fenders will not cover them completely. Extensions from Bushwacker or Rough Country will add +2-3 inches of width.
• 💨 Dirt protection: Wide fenders reduce water splashing on doors and windows.

2. Aluminum fenders

• ⚖️ 30–40% lighter than steel, which reduces the load on the suspension.
• 🛡️ Do not rust, but require protection from mechanical damage (soft metal).

3. Mudguards with integrated footrests

• 👟 Convenient for tall pickup trucks (eg. Atlas with lift kit).
• 🔧 Often compatible with rock sliders (protective arches).

4. Carbon or plastic fenders

• 🏎️ Used in drift or rally for weight loss.
• ⚠️ Not suitable for daily use - fragile at low temperatures.

Example prices for tuning wings (2026):

• 💰 Extensions Bushwacker Pocket Style — ~25 thousand rubles. per set.
• 💰 Aluminum fenders ARB — ~40 thousand rubles. for a couple.
• 💰 Carbon parts (on order) - from 60 thousand rubles.

How to avoid corrosion on new fenders?

1. Before installation, apply zinc primer (For example, Zinc Rich Primer) on the inside of the wing.

2. Treat all welds sealant (For example, 3M 08509).

3. Check the drainage holes at the bottom of the wing every six months - if they are clogged with dirt, moisture will accumulate inside.

4. After washing, blow out the wings with compressed air (especially in winter).

Typical replacement mistakes and how to avoid them

Even experienced craftsmen sometimes make mistakes, which then lead to squeaks, corrosion or poor fit wings Here are the most common mistakes and ways to prevent them:

1. Gap mismatch

• 🔧 Problem: The wing is installed, but there is a gap of 2-3 mm between it and the hood/door.
• 🛠️ Solution: Check rack mounting points — the wing may have become warped due to uneven tightening of the bolts. Use shims for alignment.

2. Corrosion a year after replacement

• 🔍 Problem: The new wing began to rust from the inside.
• 🛡️ Solution: Before installation, be sure to treat the inside surface anti-gravel (For example, Dinitrol 4941). Some masters neglect this, saving time.

3. Poor paint job

• 🎨 Problem: The paint began to peel off after six months.
• 🔥 Solution: Don't paint the wing in a hurry. Follow the technology:
  1. Degreasing (Antisilicone).
  2. Primer in 2 layers.
  3. Paint + varnish with drying dust chamber.

4. Creaks when moving

• 🔊 Problem: After replacement, the wing squeaks on bumps.
• 🛑 Solution: Check rubber gaskets between the fender and the body. If they are worn out, replace them. You can also use silicone grease for fastenings.

Where to buy wings for Nissan Atlas: verified suppliers

The choice of where to buy depends on your budget and the length of time you are willing to wait for the part. Let's look at the main options:

1. Official Nissan dealers

• ✅ Pros: 100% original, guaranteed, checked by VIN.
• ❌ Cons: Expensive (the price may be 20–30% higher than in online stores).
• 📍 Where: Salons Nissan or authorized service centers.

2. Online spare parts stores

• 🌍 International:
  • Amayama (Japan) - original and non-original parts, delivery 2-4 weeks.
  • BuyCarParts (Europe) - wide selection of analogues.
• 🇷🇺 Russian:
  • Exist.ru — fast delivery, there are warehouses in Moscow and St. Petersburg.
  • Autodoc.ru — convenient selection by VIN, there are often discounts.

3. Disassembly and used parts

• 💰 Price: A used original wing can be found for 3–8 thousand rubles.
• ⚠️ Risks: Check for availability hidden corrosion (especially in places of welding) and deformations.
• 📍 Where to look: Avito, Drom.ru, specialized groups in VKontakte (for example, “Disassembly of Nissan Navara/Atlas”).

4. Local markets and shops

• 🏙️ Suitable if you need a part urgently (for example, after an accident).
• 🔍 Tip: Take it with you sample of an old wing or photographs of fastenings for verification.

When purchasing used fenders, be sure to check:

• 🔎 Condition of welds (are there any cracks).
• 🎨 Paintwork thickness (if the wing has already been painted, there may be rust hidden under the paint).
• 🔧 Completeness (sometimes there are no mounting bolts or rubber seals).

FAQ: Frequently asked questions about wings Nissan Atlas

🔧 Is it possible to install a wing from Nissan Navara D40 on Atlas D22?

No, these models have different body geometry. Wings from D40 wider and will not fit the fastenings. The exception is some tuning parts, but they require modification (welding, adjustment).

💡 Do I need to paint a new wing if it comes with a primer?

Yes, definitely! Factory primer protects the metal only during transportation. Without painting, the wing will begin to rust in 3–6 months (especially in Russian winter conditions). Use three-layer system: primer + paint + varnish.

⚡ How long does it take to replace a wing?

Service time: 3–5 hours (depending on welding). On your own – 6–10 hours (if you have no experience). The longest stage is surface preparation (removing rust, putty).

🔍 How to check if the wing from the Japanese version is suitable Atlas to the European one?

Check the catalog numbers (see table above). Japanese versions (Nissan Atlas for the domestic market) may have other mountings for turn signals or side mirrors. Also check VIN compatibility on the website Nissan Parts Catalog.

💰 Is it worth buying wings at AliExpress?

Risky. Cheap wings from China are often made of thin metal (0.6–0.8 mm instead of the standard 1.0–1.2 mm) and are not certified. If you still decide, choose sellers with a rating above 98% and read reviews with photos of the installation.